Asset 12 Asset 10 Asset 15 Asset 15 autodesk_icon_font_04_06_16_kl Asset 11 autodesk_icon_font_04_06_16_kl autodesk_icon_font_1_18_17_start_over-01

Worldwide Sites

You have been detected as being from . Where applicable, you can see country-specific product information, offers, and pricing.

Change country/language X

Keyboard ALT + g to toggle grid overlay

AutoCAD for Mac Keyboard Shortcuts

AutoCAD for Mac Shortcuts & Hotkey Guide

Work faster and more efficiently by using the AutoCAD for Mac shortcuts below. You can find a downloadable list of shortcuts and commands in the AutoCAD for Mac Keyboard Shortcuts PDF.

Jump to a section

One-Key Shortcuts  |  Toggles and Screen Management

Hot Keys:  A-C  |  D-F  |  G-I  |  J-L  | M-O  |  P-R  |  S-U  |  V-X  |  Y, Z, #

One-Key Shortcuts

Below, you'll find the AutoCAD for Mac one-key shortcuts. Click on the image for a larger view.

Toggles and Screen Management

Below, you'll find an abbreviated list of commands that can be used in AutoCAD for Mac.

Toggle General Features

Cmd-1 Opens or closes the Tool Sets palette
Cmd-2 Opens or closes the Content palette
Cmd-3 Opens or closes the command window
Cmd-4 Opens or closes the Layers palette
Cmd-5 Opens or closes the Properties Inspector palette
Cmd-6 Toggles the status bar
Cmd-7 Opens or closes the Reference Manager palette
Cmd-8 Opens or closes the Project Manager palette
Cmd-9 Opens or closes the Material Browser palette
Cmd-/ Launches the online help (browser)
Cmd-E Displays the Export Data dialog
Cmd-F Displays the Find and Replace dialog
Cmd-G Groups selected objects
Cmd-I Displays the Properties Inspector palette
Cmd-R Regenerates the current viewport
Cmd-W Closes the current drawing
Cmd-+ Zooms in 2x
Cmd-- Zooms out 0.5x
Cmd-, Displays the Application Preferences dialog
Cmd-. Displays the Quick View dialog
Shift-Cmd-C Displays the color palette
Shift-Cmd-; Displays the Check Spelling dialog

Toggles

Fn-F1 or Cmd-/ Displays Help
Fn-F2 Expands or collapses the display of the Command Window
Fn-F3 or
Ctrl-F or
rl-Shift-F
Toggles object snap mode on and off
Fn-F4 Toggles 3D object snap mode on and off
Fn-F5 Toggles isoplane mode
Fn-F6 or
Cmd-D or
Ctrl-D
Toggles Dynamic UCS mode on and off
Fn-F7 or
Ctrl-G or
Ctrl-Shift-G
Toggles grid display on and off
Fn-F8 or
Cmd-L or
Shift-Cmd-O
Toggles ortho mode on and off
Fn-F9 or
Cmd-B or
Ctrl-B
Toggles ortho mode on and off
Fn-F10 or
Cmd-U or
Ctrl-U
Toggles polar tracking on and off
Shift-Cmd-D Toggles Dynamic Input mode on and off
Shift-Cmd-F Toggles Clean Screen mode on and off
Shift-Cmd-I or
Shift-Ctrl-I
Toggles Infer Constraints mode on and off
Shift-Cmd-T Toggles object snap tracking on and off
Ctrl-I Toggles the coordinates display mode
Ctrl-W or
Ctrl-Shift-W
Toggles Selection Cycling
Ctrl-H Toggles PICKSTYLE on and off
Shift-Cmd-H Toggles the display of all palettes on or off

Manage Workflow

Cmd-C or Ctrl-C Copies the selected objects to the Clipboard
Cmd-E Displays the Export Data dialog box
Cmd-F Displays the Find and Replace dialog box
Cmd-V or Ctrl-V Pastes the contents of the Clipboard to the current layout
Cmd-X or Ctrl-X Removes the selected from the drawing and adds them to the Clipboard
Cmd-Y or Ctrl-Y
or Shift-Cmd-Z
Reverses the most recent undo
Cmd-Z or Ctrl-Z Undoes the most recent action
Ctrl-[ or Ctrl-\ Cancels
Shift-Cmd-; Displays the Check Spelling dialog box
Ctrl-J or Ctrl-M Repeats the previous command
Shift-Ctrl-C Copies the selected objects with a specified base point
Shift-Ctrl-E Implied Face Extrusion (PressPull)

Manage Drawings

Cmd-A or Ctrl-A Selects all objects in the current layout
Cmd-G Groups the selected objects
Cmd-H Hides AutoCAD window
Cmd-M Minimizes the current drawing window
Cmd-N or Ctrl-N Creates new drawing
Cmd-O or Ctrl-O Opens drawing
Cmd-P or Ctrl-P Displays the Print/Plot dialog box
Cmd-Q or Ctrl-Q Closes the program
Cmd-R Regenerates the current viewport
Cmd-S or Ctrl-S Saves the current drawing. If the drawing has not been saved yet, the Save Drawing As dialog box is displayed
Cmd-W Closes the current drawing
Cmd-Opt-W Closes all drawings
Shift-Cmd-G Ungroups the selected group
Shift-Cmd-P Displays the Page Setup Manager
Shift-Cmd-R Regenerates all viewports in the current layout
Shift-Cmd-S or
Shift-Ctrl-S
Displays the Save Drawing As dialog box
Ctrl-A Selects all objects in the current layout
Cmd-Opt-M Minimizes all

Manage Screen

Fn-F11 Hides all open windows
Fn-F12 Display dashboard
Cmd-1 or Ctrl-3 Opens or closes the Tool Sets palette
Cmd-2 or Ctrl-2 Opens or closes the Content palette on and off
Cmd-3 or Ctrl-9 Shows or hides the Command Window
Cmd-4 Opens or closes the Layers palette
Cmd-5 or Cmd-I
or Ctrl-1
Opens or closes the Properties Inspector palette
Cmd-6 Toggles the display of the status bar on and off
Cmd-7 Opens or closes the Reference Manager palette
Cmd-8 or Ctrl-4 Project Manager
Cmd-9 Material Browser
Cmd-0 or Ctrl-0 Toggles Clean Screen on and off
Cmd-- Zooms out
Cmd-+ Zooms in
Cmd-, Options
Cmd-. or Shift-
Cmd-.
Displays the Quick View dialog box
Shift-Cmd-C Displays the Color Palette. Select a new color to make it the current color for new objects
Cmd-Opt-H Hides the Windows of all other applications
Cmd-Opt-I Properties
Cmd-Opt-T Toggles Toolset Palette

A, B, C

A

A ARC / Creates an arc
AA AREA / Calculates the area and perimeter of objects or of defined areas
AC BACTION / Adds an action to a dynamic block definition
AR ARRAY / Creates multiple copies of objects in a pattern
ATE ATTEDIT / Changes attribute information in a block
ATI ATTIPEDIT / Changes the textual content of an attribute within a block
ATTE ATTEDIT / Changes attribute information in a block

B

B BLOCK / Creates a block definition from selected objects
BC BCLOSE / Closes the Block Editor
BE BEDIT / Opens the block definition in the Block Editor
BH HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill
BLENDSRF SURFBLEND / Creates a transition surface between two existing surfaces or solids
BO BOUNDARY / Creates a region or a polyline from an enclosed area
BPUB UBLISH / Publishes a set of drawings to PDF files or printers
BR BREAK / Breaks the selected object between two points
BS BSAVE / Saves the current block definition
BVS VSTATE / Creates, sets, or deletes a visibility state in a dynamic block

C

C CIRCLE / Creates a circle
CBAR CONSTRAINTBAR / A toolbar-like UI element that displays the available geometric constraints on an object
CH ROPERTIES / Controls properties of existing objects
CHA CHAMFER / Bevels the edges of objects
CL COMMANDLINE / Displays the Command Line window
CLIPVIEWPORT VPCLIP / Clips layout viewport objects and reshapes the viewport border
CO COPY / Copies objects a specified distance in a specified direction
COL COLOR / Sets the color for new objects
COMMANDHIDE COMMANDLINEHIDE / Hides the Command Line window
CREASE MESHCREASE / Selects mesh subojects to crease
CREATESOLID SURFSCULPT / Converts a group of surfaces that enclose a watertight region to a 3D solid
CSETTINGS CONSTRAINTSETTINGS / Controls the display of geometric constraints on constraint bars
CT CTABLESTYLE / Sets the name of the current table style
CUBE NAVVCUBE / Controls the visibility and display properties of the ViewCube tool
CURVATURE ANALYSIS ANALYSISCURVATURE/ Evaluates areas of high and low surface curvature by displaying a color gradient
CUSTOMIZE CUI/ Manages the customized user interface elements
CYL CYLINDER / Creates a 3D solid cylinder

D, E, F

D

D DIMSTYLE / Creates and modifies dimension styles
DAL DIMALIGNED/ Creates an aligned linear dimension
DAN DIMANGULAR/ Creates an angular dimension
DAR DIMARC/ Creates an arc length dimension
DBA DIMBASELINE/ Creates a linear, angular, or ordinate dimension from the baseline of the previous or selected dimension
DCE DIMCENTER / Creates the center mark or the centerlines of circles and arcs
DCO DIMCONTINUE / Creates a dimension that starts from an extension line of a previously created dimension
DCON DIMCONSTRAINT / Applies dimensional constraints to selected objects or points on objects
DDA DIMDISASSOCIATE / Removes associativity from selected dimensions
DDI DIMDIAMETER / Creates a diameter dimension for a circle or an arc
DDPTYPE PTYPE/ Specifies the display style and size of point objects
DDVPOINT VPOINT/ Sets the viewing direction for a 3D visualization of the drawing
DED DIMEDIT / Edits dimension text and extension lines
DELCON DELCONSTRAINT/ Removes all geometric and dimensional constraints from a selection set of objects
DI DIST / Measures the distance and angle between two points
DIV DIVIDE / Creates evenly spaced point objects or blocks along the length or perimeter of an object
DJL DIMJOGLINE / Adds or removes a jog line on a linear or aligned dimension
DJO DIMJOGGED / Creates jogged dimensions for circles and arcs
DL DATALINK / The Data Link dialog box is displayed
DLI DIMLINEAR/ Creates a linear dimension
DLU DATALINKUPDATE / Updates data to or from an established external data link
DO DONUT / Creates a filled circle or a wide ring
DOR DIMORDINATE / Creates ordinate dimensions
DOV DIMOVERRIDE / Controls overrides of system variables used in selected dimensions
DR DRAWORDER / Changes the draw order of images and other objects
DRA DIMRADIUS / Creates a radius dimension for a circle or an arc
DRAFTANGLE ANALYSIS ANALYSISDRAFTANGLE/ Evaluates whether a model has adequate draft between a part and its mold
DRE DIMREASSOCIATE / Associates or re-associates selected dimensions to objects or points on objects
DRM DRAWINGRECOVERY / Displays a list of drawing files that can be recovered after a program or system failure
DS DSETTINGS / Sets grid and snap, polar and object snap tracking, object snap modes, Dynamic Input, and Quick Properties
DT TEXT / Creates a single-line text object
DV DVIEW / Defines parallel projection or perspective views by using a camera and target

E

E ERASE / Removes objects from a drawing
ED DDEDIT / Edits single-line text, dimension text, attribute definitions, and feature control frames
EL ELLIPSE / Creates an ellipse or an elliptical arc
ER EXTERNALREFERENCES /Opens the External References palette
EX EXTEND /Extends objects to meet the edges of other objects
EXIT QUIT / Exits the program
EXP EXPORT / Saves the objects in a drawing to a different file format
EXT EXTRUDE / Extends the dimensions of a 2D object or 3D face into 3D space
EXTENDSRF SURFEXTEND /Creates new surface by extending existing surface

F

F FILLET / Rounds and fillets the edges of objects
FILLETSRF FILTER /Creates new surface by filleting existing surface
FREEPOINT POINTLIGHT / Creates lighting effect that radiates in all directions from its location
FSHOT FLATSHOT /Creates a 2D representation of all 3D objects based on the current view
FULLSCREEN CLEANSCREENON / Clears the screen of the menu bar and all palettes
FULLSCREENOFF CLEANSCREENOFF / Restores the state of display before CLEANSCREENON was used

G, H, I

G

G GROUP /Creates and manages saved sets of objects called groups
GCON GEOCONSTRAINT /Fills an enclosed area or selected objects with a gradient fill
GD GRADIENT / Fills an enclosed area or selected objects with a gradient fill
GENERATESECTION SECTIONPLANETOBLOCK / Saves 2D and 3D sections as blocks

H

H HATCH / Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill
HB HATCHTOBACK /Sets the draw order for all hatches in the drawing to be behind all other objects
HE HATCHEDIT/ Modifies an existing hatch or fill
HI HIDE / Regenerates a 3D wireframe model with hidden lines suppressed

I

I INSERT / Inserts a block or drawing into the current drawing
IAD IMAGEADJUST / Controls the image display of the brightness, contrast, and fade values of images
IAT IMAGEATTACH / Inserts a reference to an image file
ICL IMAGECLIP / Crops the display of a selected image to a specified boundary
ID ID / Displays the UCS coordinate values of a specified location
IM IMAGE / Displays the External References palette
IMP IMPORT / Imports files of different formats into the current drawing
IN INTERSECT / Creates a 3D solid, surface, or 2D region from overlapping solids, surfaces, or regions
INF INTERFERE / Creates a temporary 3D solid from the interferences between two sets of selected 3D solids
ISOLATE ISOLATEOBJECTS / Displays selected objects across layers; unselected objects are hidden

J, K, L

J

J JOIN / Joins similar objects to form a single, unbroken object
JOG DIMJOGGED / Creates jogged dimensions for circles and arcs
JOGSECTION SECTIONPLANEJOG / Creates a section plane that has multiple segments

K

L

L LINE / Creates straight line segments
LA LAYER / Manages layers and layer properties
LAS LAYERSTATE / Saves, restores, and manages named layer states
LAYERFREEZE LAYFRZ / Freezes the layer of the selected object
LAYERHIDE LAYOFF / Turns off the layer of a selected object
LAYERI SOLATE LAYISO / Hides or locks all layers except those of the selected objects
LAYERL OCK LAYLCK / Locks the layer of a selected object
LAYERMAKE CURRENT LAYMCUR / Sets the current layer to that of a selected object
LAYERMATCH LAYMCH / Changes the layer of a selected object to match the destination layer
LAYERUNISOLATE LAYUNISO / Restores all layers that were hidden or locked with the LAYISO command
LAYERUNLOCK LAYULK / Unlocks the layer of a selected object
LE QLEADER / Creates a leader and leader annotation
LEN LENGTHEN / Changes the length of objects and the included angle of arcs
LESS MESHSMOOTHLESS / Decreases the level of smoothness for mesh objects by one level
LI LIST / Displays property data for selected objects
LO LAYOUT / Creates and modifies drawing layout tabs
LT LINETYPE / Loads, sets, and modifies linetypes
LTS LTSCALE / Changes the scale factor of linetypes for all objects in a drawing
LW LWEIGHT / Sets the current lineweight, lineweight display options, and lineweight units

M, N, O

M

M MOVE / Moves objects a specified distance in a specified direction
MA MATCHPROP / Applies the properties of a selected object to other objects
ME JOIN / Joins similar objects to form a single, unbroken object
MEA MEASUREGEOM / Measures the distance, radius, angle, area, and volume of selected objects or sequence of points
MI MIRROR / Creates a mirrored copy of selected objects
ML MLINE / Creates multiple parallel lines
MLA MLEADERALIGN / Aligns and spaces selected multileader objects
MLC MLEADERCOLLECT / Organizes selected multileaders that contain blocks into rows or columns, and displays the result with a single leader
MLD MLEADER / Creates a multileader object
MLE MLEADEREDIT / Adds leader lines to, or removes leader lines from, a multileader object
MLS MLEADERSTYLE / Creates and modifies multileader styles
MO PROPERTIES / Controls properties of existing objects
MORE MESHSMOOTHMORE / Increases the level of smoothness for mesh objects by one level
MS MSPACE / Switches from paper space to a model space viewport
MT MTEXT / Creates a multiline text object
MV MVIEW / Creates and controls layout viewports

N

NETWORKSRF SURFNETWORK / Creates non-planar surfaces in the space between edge subobjects, splines, and other 2D and 3D curves
NEWPROJECT NEWSHEETSET / Creates a new project data (DST) file that manages drawing layouts, file paths, and project information
NVIEW VIEW / Saves and restores named views, camera views, layout views, and preset views

O

O OFFSET / Creates concentric circles, parallel lines, and parallel curves
OBJECTSELECTION LIMIT OPTIONS / Customizes the program settings
OFFSETSRF SURFOFFSET/ Creates a parallel surface or solid by setting an offset distance from a surface
OP OPTIONS / Customizes the program settings
OPENPROJECT SURFOFFSET / Creates a parallel surface or solid by setting an offset distance from a surface
ORBIT 3DORBIT / Rotates the view in 3D space, but constrained to horizontal and vertical orbit only
OS OSNAP / Sets running object snap modes

P, Q, R

P

P PAN / Moves the view planar to the screen
PA PASTECLIP / Pastes objects from the Clipboard into the current drawing
PALETTE SCLOSE TOOLSETSCLOSE/ Closes the tool palettes window
PAR PARAMETERS / Controls the associative parameters used in the drawing
PARAM BPARAMETER / Adds a parameter with grips to a dynamic block definition
PATCH SURFPATCH / Creates a new surface by fitting a cap over a surface edge that forms a closed loop
PE PEDIT/ Edits polylines and 3D polygon meshes
PGP ALIASEDIT / Creates, modifies, and deletes AutoCAD command aliases.
PL PLINE / Creates a 2D polyline
PM SHEETSET / Opens the Project Manager
PMAUTOOPEN SSMAUTOOPEN / Controls the display behavior of the Project Manager when a drawing associated with a layout is opened.
PMFOUND SSFOUND / Displays the path and file name if a search for a project file is successful
PMHIDE SHEETSETHIDE / Closes the Project Manager
PMLAYOUT STATUS SMSHEETSTATUS / Controls how the status data in a project is refreshed
PMLOCATE SSLOCATE / Controls whether the project associated with a drawing is located and opened when the drawing is opened
PMPOLLTIME SSMPOLLTIME / Controls the time interval between automatic refreshes of the status data in a project
PMSTATE SSMSTATE / Indicates whether the Project Manager window is open or closed
PO POINT / Creates a point object
POFF HIDEPALETTES / Hides currently displayed palettes (including the command line)
POINTOFF CVHIDE / Hides the control vertices for both NURBS surfaces and curves
POINTON CVSHOW / Displays the control vertices for both NURBS surfaces and curves
POL POLYGON / Creates an equilateral closed polyline
PON SHOWPALETTES / Restores the display of hidden palettes
PR PROPERTIES / Displays Properties palette
PRCLOSE PROPERTIESCLOSE / Closes the Properties Inspector palette
PRE PREVIEW / Displays the drawing as it will be plotted
PREF OPTIONS / Customizes the program settings
PRINT PLOT / Plots a drawing to a plotter, printer, or file
PS PSPACE / Switches from a model space viewport to paper space
PSOLID POLYSOLID / Creates a 3D wall-like polysolid
PU PURGE / Removes unused items, such as block definitions and layers, from the drawing
PYR PYRAMID / Creates a 3D solid pyramid

Q

QSAVE QSAVE / Saves the current drawing
QVD QUICKVIEW / Displays a list of all open drawings, and the layouts contained in the current drawing or the selected drawing when more than one drawing is open

R

R REDRAW / Refreshes the display in the current viewport
RA REDRAWALL / Refreshes the display in all viewports
RE REGEN / Regenerates the entire drawing from the current viewport
REA REGENALL / Regenerates the drawing and refreshes all viewports
REBUILD CVREBUILD/ Rebuilds the shape of NURBS surfaces and curves
REC RECTANG / Creates a rectangular polyline
REFINE MESHREFINE/ Refines mesh objects
REG REGION / Converts an object that encloses an area into a region object
REN RENAME / Changes the names assigned to items such as layers and dimension styles
REV REVOLVE / Creates a 3D solid or surface by sweeping a 2D object around an axis
RO ROTATE / Rotates objects around a base point
RR RENDER / Creates a photorealistic or realistically shaded image of a 3D solid or surface model
RW RENDERWIN / Displays the Render window without starting a rendering operation

S, T, U

S

S STRETCH / Stretches objects crossed by a selection window or polygon
SC SCALE / Enlarges or reduces selected objects, keeping the proportions of the object the same after scaling
SCR SCRIPT / Executes a sequence of commands from a script file
SE DSETTINGS/ Sets grid and snap, polar and object snap tracking, object snap modes, and Dynamic Input
SEC SECTION / Uses the intersection of a plane and solids, surfaces, or mesh to create a region
SELECTIONLIMIT PROPOBJLIMIT / Limits the number of objects that can be changed at one time with the Properties Inspector
SET SETVAR / Lists or changes the values of system variables
SHA SHADEMODE / Starts the VSCURRENT command
SL SLICE / Creates new 3D solids and surfaces by slicing, or dividing, existing objects
SMOOTH MESHSMOOTH / Converts 3D solids, surfaces, and legacy mesh objects to the enhanced mesh object for smoothing, refinement, creasing, and splitting
SN SNAP / Restricts cursor movement to specified intervals
SO SOLID / Creates solid-filled triangles and quadrilaterals
SP SPELL / Checks spelling in a drawing
SPE SPLINEDIT / Edits a spline or spline-fit polyline
SPL SPLINE / Creates a smooth curve that passes through or near specified points
SPLANE SECTIONPLANE / Creates a section object that acts as a cutting plane through 3D objects
SPLAY SECTIONPLANE/ Creates one or more section objects and places them throughout a 3D model
SPLIT MESHSPLIT / Splits a mesh face into two faces
SSM SHEETSET / Opens the Sheet Set Manager
ST STYLE / Creates, modifies, or specifies text styles
SU SUBTRACT / Combines selected 3D solids, surfaces, or 2D regions by subtraction

T

T MTEXT / Creates a multiline text object
TA TEXTALIGN / Aligns multiple text objects vertically, horizontally, or obliquely
TB TABLE / Creates an empty table object
TEDIT TEXTEDIT / Edits a dimensional constraint, dimension, or text object
TEXTSTYLE EDIT STYLE / Creates, modifies, or specifies text styles
TH THICKNESS / Sets the default 3D thickness property when creating 2D geometric objects
TI TILEMODE / Controls whether paper space can be accessed
TO TOOLSETS/ Opens the Tool Sets palette
TOL TOLERANCE / Creates geometric tolerances contained in a feature control frame
TOR TORUS / Creates a donut-shaped 3D solid
TP CONTENT / Opens the Content palette
TR TRIM / Trims objects to meet the edges of other objects

U

U UNDO/ Reverses the most recent action
UC UCSMAN / Manages defined user coordinate systems
UN UNITS / Controls coordinate and angle display formats and precision
UNCREASE MESHUNCREASE / Removes crease from selected mesh object
UNHIDE UNISOLATEOBJECTS / Displays objects previously hidden with the ISOLATEOBJECTS or HIDEOBJECTS command
UNI UNION / Unions two solid or two region objects

V, W, X

V

V VIEW / Saves and restores named views, camera views, layout views, and preset views
VIEWPORTCLIP VPCLIP / Clips layout viewport objects and reshapes the viewport border
VP VPOINT / Sets the viewing direction for a 3D visualization of the drawing
VPLAY VIEWPLAY / Plays the animation associated to a named view
VPORT VPORTS / Creates multiple viewports in model space or paper space
VS VSCURRENT/ Sets the visual style in the current viewport

W

W WBLOCK / Writes objects or a block to a new drawing file
WE WEDGE / Creates a 3D solid wedge
WHEEL NAVSWHEEL / Displays a wheel that contains a collection of view navigation tools

X

X EXPLODE / Breaks a compound object into its component objects
XA XATTACH / Inserts a DWG file as an external reference (xref)
XB XBIND / Binds one or more definitions of named objects in an xref to the current drawing
XC XCLIP / Crops the display of a selected external reference or block reference to a specified boundary
XL XLINE / Creates a line of infinite length
XR XREF / Starts the EXTERNALREFERENCES command

Y, Z, #

Y

Z

Z ZOOM / Increases or decreases the magnification of the view in the current viewport
ZEBRA ANALYSISZEBRA / Projects stripes onto a 3D model to analyze surface continuity
ZIP ETRANSMIT / Creates a Self-Extracting or Zipped Transmittal Package

#

3A 3DARRAY / Creates copies of objects arranged in a 3D pattern
3AL 3DALIGN / Aligns objects in 3D
3DMIRROR MIRROR3D / Mirrors objects across a specified mirroring plane
3DO 3DORBIT / Rotates the view in 3D space, but constrained to horizontal and vertical orbit only
3F 3DFACE / Creates a 3D polyface mesh by specifying each vertex; also can specify whether an edge segment is invisible
3M 3DMOVE / Moves selected objects along an axis or plane
3P 3DPOLY / Creates a 3D polyline
3R 3DROTATE / Rotates selected objects about a specified axis
ARU ACTUSERINPUT / Pauses for user input in an action macro
3S 3DSCALE / Scales selected objects along a specified plane or axis, or uniformly along all 3 axes

Get it now

  • It’s easy to get started. Download a free 30-day trial and try it out. Purchase options include flexible subscription terms to fit your needs.