Identify and resolve clash and constructability issues between Revit and Navisworks | Autodesk

Learning

Certification

Certification overview

Architecture, Engineering & Construction

Design & Manufacturing

Media & Entertainment

Support & Policies

Learning

Course overview

Aggregate Revit models (from multi-disciplines) in Navisworks
Run a clash detection and visualize the results in Navisworks
Report a problem (model conflict) through an Issue in Navisworks
Review the Issue in Revit, fix the problem in the 3D model in Revit, and close the Issue in Revit

Related learning

Module30 min.

Coordinate designs across disciplines by setting the shared coordinates

Revit, Civil 3D

Module15 min.

Adding cable tray in Revit

Revit

Module20 min.

Defining loads and combinations

Revit

Course35 min.

Create the analytical model in Revit for structural analysis

Revit

Course5 hr.

Introduction to BIM for the AECO industry

Revit, Construction Cloud, Forma

Course1 hr. 35 min.

Model coordination for operations layout and planning

Navisworks Freedom, Navisworks Simulate, Navisworks Manage...

Course1 hr. 35 min.

Integrated project deliveries with BIM Collaborate Pro

BIM Collaborate, Revit, Docs, Build, ACC Connect...

Course1 hr. 10 min.

Layout workspaces to accommodate health standards

Dynamo, Revit, Autodesk Platform Services

Module30 min.

Working in tight spaces with duct and pipe in Revit

Revit

Module45 min.

Take advantage of the information in the model during the documentation phase to be more...

Revit