• Fusion

Create a CAM setup for a rim

Create a CAM setup for a rim.

Type:

Module

Length:

30 min.

‌

Module overview

Learn how to create a CAM setup for a Formula SAE rim and fixture in Fusion. You’ll define machining stock, identify fixtures, locate the work coordinate system (WCS), and configure post processor settings. These techniques help establish an accurate setup and prepare the rim for CNC machining.

After completing this module, you’ll be able to:

  • Create a CAM setup
  • Define CAM stock
  • Locate a WCS
  • Define CAM post processor settings

This module is part of the Fusion CORE: CAM (Metric) course.

Module downloads

These downloadable resources will be used to complete units in this module:

Module outline

  • Create CAM setup
  • Create a new CAM setup for a rim
  • Module quiz

Related learning

Course1 hr. 30 min.
Learn Fusion for CAM in 90 minutes (Imperial)
Fusion, Fusion for Manufacturing
View
Course1 hr. 30 min.
Learn Fusion for CAM in 90 minutes (Metric)
Fusion, Fusion for Manufacturing
View
Module30 min.
Explore how designs are manufactured
Fusion
View
Course2 hr. 40 min.
Drawing
Fusion
View
Module20 min.
Practice exercise: Create multi-axis positioning toolpaths for CNC milling
Fusion
View
Module3 hr.
Project | Electronics design
Fusion
View
Course8 hr. 25 min.
Fusion CORE: CAM (Imperial)
Fusion
View
Module30 min.
Challenge exercise: Create a CAM setup and toolpaths for plasma cutting
Fusion
View
Module20 min.
Practice exercise: Create 2.5 axis toolpaths to rough and finish mill a part
Fusion
View
Module45 min.
Challenge exercise: Create toolpaths to machine a 3-axis part
Fusion
View

Browse content with related tags