Project: Design a model for 3D printing
Create a micro drone chassis using Fusion 360 that can be produced using 3D printing.
Apply your skills with practice and challenge exercises that deliver advanced joint control and a minimalistic design approach.
A design competition has been announced to design, create, and race a micro drone. The micro drone challenge will require your team to develop a drone chassis, camera mount and landing gear that can be 3D printed, assembled, and flown in the competition. A sample drone is provided for reference, but this design is too heavy to fly.
Note: This micro drone is a sub-class of drones that is intended to be flown indoors. The total drone weight including all components and 3D printed parts ranges from 40-50g. The FAA requires that any drones flown in federally regulated airspace, above the weight of 250 grams (0.55lbs) and flow for recreation or commercial applications must register their drone and take a free online safety test to remain in compliance. If you build and fly your micro drone inside or within the confines of a drone specific safety cage, this is outside of federally regulated airspace and a drone license and registration should not be required. As a safety precaution you should check your local regulations to ensure there are no additional guidelines that must be followed.
After completing this project, you'll be able to:
- Review a sample design.
- Create a micro drone chassis, camera mount and landing gear.
- Inspect the mass properties of the drone.
- Refine and validate a design.
Teaching this project to students in the classroom?
Use this instructor guide to incorporate this and our other CAD projects into your lesson plans.
Want to create custom learning playlists to share with your students?
Share modules and courses using Playlists. Once you create a Playlist, share the URL with your students and they can sign into their Autodesk Account to access. Choose and share the modules that best fit your curriculum using the links below.
- To create a Playlist, select [+] 'Add to list' from the banner above.
- To share a list with others, set the list visibility to Public and share the link.
Need to teach the skills covered this project?
Send your students to our Introduction to 3D Modeling for Manufacturing self-guided course. They can learn at their own pace, track their own progress, and earn a certificate of completion when they get 75% or more on the final test.