• Inventor

Coaching: Introduction to Inventor Frame Generator

This content will provide you with an introduction to the features and benefits of the Frame Generator Design Accelerator inside of Autodesk Inventor. After completion, you will understand the entire workflow from generating your skeleton model through to producing manufacturing drawings.


Module overview

This content will provide you with an introduction to the features and benefits of the Frame Generator Design Accelerator inside of Autodesk Inventor. After completion, you will understand the entire workflow from generating your skeleton model through to producing manufacturing drawings.

This content takes approximately 50 minutes to complete. By the end, you should be able to: 

  • Recognize when to use frame generator 
  • Construct a skeleton model 
  • Use various options in the insert frame command 
  • Prepare members for assembly or welding 
  • Document assembly and cut lists 

About the author

This content was created by James Willoughby, Technical Account Specialist at Autodesk.

Before you start 

  • Please make sure you have the Inventor Professional software installed. 
  • If you have technical difficulties, please reach out to product support. 

Module outline

  • Introduction to Inventor Frame Generator

Related learning

Module2 hr.
Inventor

View
Module30 min.
Inventor
Module20 min.
Inventor, Revit
Module40 min.
Inventor
Module15 min.
Inventor
Course20 min.
Inventor
Course20 min.
Inventor, Revit
Module10 min.
Vault
Module10 min.
Vault
Module10 min.
Vault