20 min.

Importing a model from Revit to Robot

Module overview

Review the ways you can bring a Revit model into Robot and then modify standard settings to make the model ready to be analyzed in Robot.

This content takes approximately 20 minutes to complete. By the end, you should be able to:

  • Link a Revit model with Robot.
  • Create a SMXX file in Revit and open it in Robot.
  • Adjust recommended meshing parameters and tolerances in Robot.

About the author

This content was created by Pawel Pulak, Designated Support Specialist at Autodesk.

Before you start

  • Please make sure you have the Revit and Robot software loaded.
  • If you have technical difficulties, please reach out to product support

Module downloads

These downloadable resources will be used to complete units in this module:

Module outline

  • Introduction to Importing a Model from Revit to Robot