Associate | ~2 hr.

CAM milling basics

Module

Learn to set up, machine, and verify a CNC program digitally using CAM. 

Overview

Learn to set up, machine, and verify a CNC program digitally using CAM. Special care is be taken to review a detailed drawing and 3D model, any work holding requirements when setting up and programming a simple part, and verifying tool motion digitally before moving to a physical machine.  We’ll then pay attention to the coordinate system location of a part and any order of operations required.  

After completing this module, you'll be able to:

  • Create a CAM setup to CNC mill a 3D model.
  • Import and create a digital tool library.
  • Set up feeds and speeds for tooling.
  • Use 2D toolpaths to rough and finish a simple part.
  • Verify tool motion through simulation.
  • Create required setup sheet and NC program.
Download resources

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

${RESELLERNAME}