Moldflow Summit
Moldflow Summit
This annual user conference inspires the Autodesk Moldflow community to share and discover new workflows for injection molding plastic simulation.
2025 Moldflow Summit Recordings
AUTODESK
Moldflow
Summit 2025 Keynote: Limbitless Solutions
Moldflow Summit 2025 Keynote: Limbitless Solutions
Albert Manero, John Sparkman, Matt Jaworski
AUTODESK
Improving
Reliability in the design of recycled short-fiber-reinforced plastics through
multiscale material modeling and machine learning
Improving Reliability in the design of recycled short-fiber-reinforced plastics through multiscale material modeling and machine learning
Dustin Souza
AUTODESK
Managing
the Cost of Optimized Cooling, and it's Influence on Part Quality
Managing the Cost of Optimized Cooling, and it's Influence on Part Quality
Erik Foltz
LG CHEM
Automated
Cavity Balancing through gate location optimization and flow leader generation
using Autodesk Moldflow
Automated Cavity Balancing through gate location optimization and flow leader generation using Autodesk Moldflow
Felipe Porcher, Borger Paul
TWINO, INPRO
Automated
Processes for Warped Part Analysis in Assemblies using Synera
Automated Processes for Warped Part Analysis in Assemblies using Synera
Andrew Sartorelli
AUTODESK
Numerical
Analysis of the Cooling Efficiency of Different Cooling Technologies for
Slender Injection Mold Cores
Numerical Analysis of the Cooling Efficiency of Different Cooling Technologies for Slender Injection Mold Cores
Andrea Gruber
NOVO NORDISK
Tips
and Tricks from the Detroit Moldflow User Group
Tips and Tricks from the Detroit Moldflow User Group
Jay Shoemaker, Tim Vanast
THE MADISON GROUP
Advancing
Crystallization Modeling in Thermoplastic Composites
Advancing Crystallization Modeling in Thermoplastic Composites
Xiaoshi Zhang, Ph.D.
2024 Moldflow Summit Recordings
AUTODESK
Moldflow Summit 2024 Keynote
Moldflow Summit 2024 Keynote
Zoe Bezpalko
AUTODESK
Moldflow Insight: Where voids go to hide (and how to find them)
Moldflow Insight: Where voids go to hide (and how to find them)
Mason Myers
AUTODESK
The unsung heroes: stories from the Moldflow help desk
The unsung heroes: stories from the Moldflow help desk
Ryan Malatesta
AUTODESK
Leveraging simulation to achieve plastic sustainability goals
Leveraging simulation to achieve plastic sustainability goals
Matthew Jaworski, PhD.
AUTODESK
What's new in Moldflow 2024
What's new in Moldflow 2024
Hanno Van Raalte
VOLVO CARS
Shrinkage adjusted constraints: Volvo's solution to warpage challenges
Shrinkage adjusted constraints: Volvo's solution to warpage challenges
Marcus Hansson
Louis Barnes (Autodesk)
LG CHEM
Integrative process and structure simulation for sustainable bio PA56
Integrative process and structure simulation for sustainable bio PA56
Julian Heinisch
THE MADISON GROUP
How injection molding simulation accelerates plastic sustainability
How injection molding simulation accelerates plastic sustainability
Erik Foltz
Brian Pelley (Autodesk)
TWINO, INPRO
Streamlining inspection workflows for injection molding process validation
Streamlining inspection workflows for injection molding process validation
Akash Castelino
AUTODESK
Moldflow research & development for 2024 and beyond
Moldflow research & development for 2024 and beyond
Franco Costa, PhD.
NOVO NORDISK
Enabling more and earlier design for manufacturing optimization
Enabling more and earlier design for manufacturing optimization
Rasmus Peter Knudsen
CODE PRODUCT SOLUTIONS & SYNERA
Next level process automation for injection molding
Next level process automation for injection molding
Hendrik Schütte (Code Product Solutions)
Andrew Sartorelli (Synera)
RUNIPSYS
Examples of studies with complex injection systems and Flow Driver simulation
Examples of studies with complex injection systems and Flow Driver simulation
Claire Sabatier
Martial Sabatier
Sylvain Morizot
LIMBITLESS SOLUTIONS
Day 2 Keynote: Prototyping personalized bionic arms with customization and scale
Day 2 Keynote: Prototyping personalized bionic arms with customization and scale
Albert Manero
John Sparkman
THE OHIO STATE UNIVERSITY
Experimental validation and developing injection molding process windows
Experimental validation and developing injection molding process windows
Travis O'Leary
BEAUMONT, INC.
Beaumont material characterization lab update
Beaumont material characterization lab update
Jacob Trott
2023 Moldflow Summit Recordings
AUTODESK
Keynote: Moldflow, Fusion, and Autodesk - The Big Picture
Keynote: Moldflow, Fusion, and Autodesk - The Big Picture
Nanda Santhanam
AUTODESK
What's new in Moldflow 2023
What's new in Moldflow 2023
Hanno Van Raalte Rahul Patil
AUTODESK
Autodesk injection molding research projects (R&D)
Autodesk injection molding research projects (R&D)
Franco Costa
AUTODESK
Moldflow Monday's - Miscellaneous Moldflow concepts, workflows, & best practices
Moldflow Monday's - Miscellaneous Moldflow concepts, workflows, & best practices
Mason Meyers
SYNVENTIVE & AUTODESK
What a mesh! Knowing the difference between 3D & Dual Domain
What a mesh! Knowing the difference between 3D & Dual Domain
Mike Garrett Jeff Higgens
SIMUTENCE
Virtual process chains for compression molding for digital product development
Virtual process chains for compression molding for digital product development
Martin Hoberg
ABB
Process optimization via core shift simulation: Reducing insert deformation
Process optimization via core shift simulation: Reducing insert deformation
Sheng Zhong
DESIGN SOFTWARE INTERNATIONAL
Intro into macros, scripting, and automated custom reports
Intro into macros, scripting, and automated custom reports
Jeff Fischer
GENERAL MOTORS
Data driving GM standardized Moldflow work
Data driving GM standardized Moldflow work
Li Qi
CODE PRODUCT SOLUTIONS
Workflow automations with the Moldflow Toolbox
Workflow automations with the Moldflow Toolbox
Hendrik Shüette
DOMO ENGINEERING PLASTICS
Get it aligned! Glass fiber orientation for predictive mechanical part performance simulation
Get it aligned! Glass fiber orientation for predictive mechanical part performance simulation
Alexandre Chantelain
DRXLMAIER GROUP
Simulation of microcellular & fiber filled injection molded parts
Simulation of microcellular & fiber filled injection molded parts
Andreas Röetzer
IMFLUX
Power up your results interpretation using API & MS Excel
Power up your results interpretation using API & MS Excel
Jay Shoemaker
AUTODESK
Validation study on anisotropic thermal conductivity feature in Moldflow 2023 Scandium
Validation study on anisotropic thermal conductivity feature in Moldflow 2023 Scandium
Vishak Perumal
AUTODESK
Shrinkage compensation, and what to do with it?
Shrinkage compensation, and what to do with it?
Timothy VanAst
2022 Moldflow Summit recordings
AUTODESK, INC.
Keynote: Leading the Future with Injection Molding
Keynote: Leading the Future with Injection Molding
Mark Hennebicque
Metso Outotec Europe & Autodesk, Inc.
Cycle Time Reduction by Exact Curing Time Prediction of Rubber Parts
Cycle Time Reduction by Exact Curing Time Prediction of Rubber Parts
Mikael Strandberg, Sudarshan Rajendiren & Matthias Fink
Gerresheimer Regensburg
Reverse Engineering of Material Data for the Improvement of Pressure Prediction
Reverse Engineering of Material Data for the Improvement of Pressure Prediction
Steffen Froehle & Simon Schoenswetter
Design and Software International (DSI)
Turn Supply Chain Pain into Gain by Automating in Moldflow
Turn Supply Chain Pain into Gain by Automating in Moldflow
Jeff Fischer, Jon Caliguri, & John Buehler
Limbitless Solutions
Transformation from Additive to Injection Molding for Personalized Bionic Arms
Transformation from Additive to Injection Molding for Personalized Bionic Arms
Albert Manero & Dominique Courbin
American Injection Molding (AIM) Institute, Beaumont Technologies, Inc.
Injection Molding Simulation: What Can I Trust?
Injection Molding Simulation: What Can I Trust?
Jennifer Schmidt
Diehl Metering
Injection Processes Improvement using Moldflow Simulations
Injection Processes Improvement using Moldflow Simulations
Matthieu Thomassey, Julien Fousseret, & Jonathan Iffenecker
Autodesk, Inc.
Autodesk Moldflow Product Update
Autodesk Moldflow Product Update
Hanno van Raalte
PEG (MF Software)
Simplified Tolerance Analysis and Reverse Engineering of Material Data
Simplified Tolerance Analysis and Reverse Engineering of Material Data
Sebastian Mönnich
University of Bradford
Fibre Dispersion and Breakage During Injection Molding of Long Fibre Reinforced Composites
Fibre Dispersion and Breakage During Injection Molding of Long Fibre Reinforced Composites
Fin Caton-Rose
Accudyn
It's and Evolution: Moldflow and Fusion 360 Workflows
It's and Evolution: Moldflow and Fusion 360 Workflows
Mike Glotzbach & Derek Kuhn
iMFlux
Simulating iMLFUX using Two Different Methods
Simulating iMLFUX using Two Different Methods
Jay Shoemaker
CAE Services
What should I do when all else fails? Solving the Warpage Puzzle with Windage
What should I do when all else fails? Solving the Warpage Puzzle with Windage
Tim Lankisch
ABB Corporate Technology Center
Coupling fluid dynamics and structural analyses for reactive molding process of thermosets materials
Coupling fluid dynamics and structural analyses for reactive molding process of thermosets materials
Paweł Bajerski
Engel
Simulation and Production Unified with ENGEL Sim Link
Simulation and Production Unified with ENGEL Sim Link
Paul Kapeller
The Madison Group & Autodesk, Inc.
Turn Supply Chain Pain into Gain by Automating in Moldflow
Turn Supply Chain Pain into Gain by Automating in Moldflow
Erik Foltz & Brian Pelley
Autodesk, Inc.
Autodesk Moldflow Research Insights
Autodesk Moldflow Research Insights
Franco Costa
2020 Moldflow Summit recordings
The AIM Institute
Moldflow vs Moldfloor
Moldflow vs Moldfloor
Jennifer Schmidt & Jason Travis
Avient Design
Molded in color metallic, prediction of aesthetics
Molded in color metallic, prediction of aesthetics
Marc Mezailles
Autodesk
Moldflow Research and Development Update
Moldflow Research and Development Update
Franco Costa
Sabic
A Coupled Simulation Approach for Accurate Predication of Long Glass Fiber Thermoplastic
A Coupled Simulation Approach for Accurate Predication of Long Glass Fiber Thermoplastic
Sandeep Kulari
Autodesk
Ask the Expert: Materials and Importance of Material Data for Analysis Accuracy
Ask the Expert: Materials and Importance of Material Data for Analysis Accuracy
Matt Jawarski & Brian Pelley
Autodesk
Cooling Channel Modeling & Result Interpretation
Cooling Channel Modeling & Result Interpretation
Sachin Fulsundar
BASF
Data Driven Processing Design
Data Driven Processing Design
Jimmy Jin
Mutual Engineering
Effectiveness of Mold Cooling & their Impact on Part Quality
Effectiveness of Mold Cooling & their Impact on Part Quality
Deepika Mistry & Guruprasad Puranmath
Autodesk
Moldflow Advanced Results Customization
Moldflow Advanced Results Customization
Mason Myers
Autodesk
Moldflow Insight Fundamentals
Moldflow Insight Fundamentals
Timothy VanAst
Purdue University
Multiphysics Topology Optimization and the Design of High Performance Injection Molds
Multiphysics Topology Optimization and the Design of High Performance Injection Molds
Joel Najmon
CAE Services
Rapid Moldflow Response for Ramping Up Ventilator Production
Rapid Moldflow Response for Ramping Up Ventilator Production
Tim Lankisch
Trend Technologies
Reverse Warp Workflows – Theory vs. Reality
Reverse Warp Workflows – Theory vs. Reality
David Lynam
Schneider Electric
Rheology Supporting Esthetics on Technical Parts (in French)
Rheology Supporting Esthetics on Technical Parts (in French)
Virginie Renavant
SolarBuddy
Illuminating Futures
Illuminating Futures
Johnathan Lamb
MF Software
SynAPI Solutions
SynAPI Solutions
Sebastian Monnich
KOSTAL
The New Idea of Foundation for Moldflow Database
The New Idea of Foundation for Moldflow Database
Liu Herong
Geely
Using the Art of War to Solve Injection Product Problems (in Chinese)
Using the Art of War to Solve Injection Product Problems (in Chinese)
Guo Shuai
Autodesk
What's New in Injection Molding
What's New in Injection Molding
Hanno Van Raalte
2019 Moldflow Summit recordings
Autodesk
Future of Making
Future of Making
Vikram Vedantham
Autodesk
Manufacturing Industry Futures
Manufacturing Industry Futures
Nick Markovic
Autodesk
Moldflow in the 4th Industrial revolution
Moldflow in the 4th Industrial revolution
Rahul Patil and Hanno van Raalte
Autodesk
Healthcare & Medical Industry
Healthcare & Medical Industry
Brian Pelley
Autodesk
Moldflow Research and Development Update
Moldflow Research and Development Update
Dr. Franco Costa
General Motors
General Motors Case Studies
General Motors Case Studies
Aaron Leonard
Imflux
Low Constant Pressure Molding Simulation
Low Constant Pressure Molding Simulation
Dan Lumpkin
Teton
Tips and tricks for as manufactured analysis using Moldflow and Helius
Tips and tricks for as manufactured analysis using Moldflow and Helius
Dough Kenik
UMass Lowell
Understanding the effects of Gravity and Inertia on Heavily filled polymers
Understanding the effects of Gravity and Inertia on Heavily filled polymers
Michael Shone
2018 Moldflow Summit recordings
Autodesk
Autodesk and Manufacturing
Autodesk and Manufacturing
Bob Yancey
Autodesk
Generative Technology: From Design to Manufacturing
Generative Technology: From Design to Manufacturing
Nanda Santhanam
General Motors
General Motors Moldflow Application Strategy
General Motors Moldflow Application Strategy
Aaron Leonard
Autodesk
Designed in Manufacturing
Designed in Manufacturing
Justin Courter
Minth Group China
Design Optimization to correct Warpage
Design Optimization to correct Warpage
Zhiguo Ma
RocTool
RocTool Technology Update
RocTool Technology Update
Steve Vershaeve
Moldflow Product Team
Panel Discussion (Q & A)
Panel Discussion (Q & A)
Autodesk
What's New in Moldflow 2019
What's New in Moldflow 2019
Hanno van Raalte
Trexel
Optimizing your part for MuCell®
Optimizing your part for MuCell®
Levi Kishbaugh
Milacron
Conformal Cooling with Tru Cool: Validation
Conformal Cooling with Tru Cool: Validation
David Moore
Sabic
Pressure Sensitivity of Polymer Melt
Pressure Sensitivity of Polymer Melt
Harindarnath Sharma
Beaumont Technologies
Moldflow vs Moldfloor
Moldflow vs Moldfloor
Jason Travitz
Madison Group
Simulating Compression Molding of LFT
Simulating Compression Molding of LFT
Patrick Mabry
Autodesk
Moldflow R & D update
Moldflow R & D update
Dr. Jin Wang
Autodesk
Process Setting Challenge
Process Setting Challenge
Tim VanAst
RJG
API introduction and background
API introduction and background
Ana Maria Marin
Smarttech
Roundness study
Roundness study
Renan Melhado Mazza
Autodesk
Identifying visual defects with Moldflow
Identifying visual defects with Moldflow
Jeff Higgins
Autodesk
AS-MFG with Product Design and Manufacturing Collection
AS-MFG with Product Design and Manufacturing Collection
Joe Huegel
General Motors
Warpage best practices
Warpage best practices
Alex Holman
American Injection Molding Institute
Design changes with DOE
Design changes with DOE
Jennifer Schmidt
Autodesk
Calculating Shrinkage of Curved Parts
Calculating Shrinkage of Curved Parts
Jay Shoemaker
2017 Moldflow Summit recordings
Autodesk
Autodesk Manufacturing Technology and vision
Autodesk Manufacturing Technology and vision
Ian Pendlebury
Autodesk
Moldflow 2017 and 2018 in review
Moldflow 2017 and 2018 in review
Hanno van Raalte
The Madison Group
Bend, Don’t Break When Processing Long-Fiber Thermoplastic Resins
Bend, Don’t Break When Processing Long-Fiber Thermoplastic Resins
Erik Foltz
BASF
Lorem ipsum dolor sit amet
Lorem ipsum dolor sit amet
Jim McGuire
FADO
Simulation & Maintenance of Conformal Cooling Channels
Simulation & Maintenance of Conformal Cooling Channels
Jarek Jaśkowiak, Michal Michalowski
Ford Motor Company
Crack the Case: Using Simulation to Identify Warpage Root Cause
Crack the Case: Using Simulation to Identify Warpage Root Cause
Li Qi
GE Appliance
Closing the Loop with Simulation Validation
Closing the Loop with Simulation Validation
Curt Randall
HRS Flow
Warpage minimization with GFRP using HRSflow´s FLEXflow technology
Warpage minimization with GFRP using HRSflow´s FLEXflow technology
Sergiu Fatu
Beaumont Labs
The Importance of Proper Material Characterization
The Importance of Proper Material Characterization
Jennifer Schmidt, Eric Bowersox
Autodesk
Moldflow R&D Update
Moldflow R&D Update
Jin Wang
Autodesk
The Evolution of Meshing
The Evolution of Meshing
Tim VanAst
Regloplas, Wesco Services
Prediction of Cycle Times for Rapid Cycle Molding Applications
Prediction of Cycle Times for Rapid Cycle Molding Applications
Kip Petrykowski, Stephen Sawdon
Toledo Mold & Die
Geometric Optimization
Geometric Optimization
Mike Garrett
Autodesk
Advanced Materials Exchange – What’s New
Advanced Materials Exchange – What’s New
Rick Dalgarno
Trexel
Design for Mucell
Design for Mucell
Kelly Chisholm
Autodesk
Weld Line Strength Prediction
Weld Line Strength Prediction
Matthew Jaworski