Setting Up Revit and Adding Reinforcing

Module overview

Adding rebar to a bridge design is most efficiently done in Revit. In this module, you learn how to reinforce bridge piers in Revit. Then, you configure your visibility graphics to clearly see the rebar that was placed.

This module takes approximately 20 minutes to complete. By the end of the module, you should be able to:

Set up the correct levels in Revit
Add pier reinforcing
Configure visibility graphics

Module pre-requisites

This module requires user-level knowledge of InfraWorks and is focused on best practices and its industry applications. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:

Built-in tutorials, available via in-product Help
eLearning Partners
Authorized Training Centers

Module outline

Related learning

Module15 min.

Analyze the bridge in InfraWorks

InfraWorks

View

Module40 min.

AECO project phases and BIM

View

Module40 min.

BIM options and procedures

View

Module40 min.

BIM project anatomy

View

Module15 min.

Documenting and Scheduling Bridge Components

Revit

View

Module10 min.

Exporting and Importing Civil Structures

Revit, InfraWorks

View

Module35 min.

Create 2D sheets with construction details in Revit

Revit

View

Module40 min.

Explain the innovations by MEP subcontractors and how they are influencing the...

Architecture Engineering & Construction Collection...

View

Module45 min.

Take advantage of the information in the model during the documentation phase to be more...

Revit

View

Module25 min.

Communicate the design intent by taking your Revit model to 3ds Max

3ds Max, Revit

View

Setting Up Revit and Adding Reinforcing

Module overview

Module pre-requisites

Module outline

Related learning

Browse content with related tags