Pre-test

Before you begin this course, test your skills by taking the following assessment to see where you stand. 

Keep track of your incorrect answers to know which skills you should study. You'll have a chance to take this same practice test again at the end of the course to see how you've improved.

 

Revit for architectural design pre-test

49 questions

An architectural designer is creating parameters for a door family. Drag and drop each Type of Parameter to the correct corresponding description.

Length
Yes/No
Material
Text
A parameter to control the hardware visibility
The material of the door trim
The height of the door
A field to enter custom notes
Select an answer

An architectural designer has created a model group and wants to place additional instances of the group. Which two of the following methods can be used. (Select two.)

Select up to 2
Select an answer

An architectural designer is creating schedules in a project. Drag and drop each schedule tool to the correct corresponding schedule description.

Note Block
Material takeoff
Sheet list
Schedule/quantities
A schedule for all the sheets in the project
A schedule for all the materials in the walls
A schedule for all the wall types in the project
A schedule for all the symbols placed
Select an answer

An architectural designer has created a detail by placing detail components in a section view. The designer wants to use the detail components in several other section views in the same project. Which tool should be used?

(Select one)
Select an answer

An architectural designer needs to control the number of horizontal grids for individual curtain walls in a project. How should this be accomplished?

(Select one)
Select an answer

What are the two View options when placing a legend component? (Select two.)

Select up to 2
Select an answer

An architectural designer wants to control the view properties of several views using a view template. After assigning the view template to all the views, the View Scale can still be adjusted in the View Control Bar for each view. Why is this happening?

(Select one)
Select an answer

An architectural designer is working in a 3D view and wants to see only the roof elements. The designer wants to inspect the roof elements without affecting the view properties. Which tool should be used?

(Select one)
Select an answer

An architectural designer is working on a project with a linked Revit model. The designer is unable to select the link. What is causing this condition?

(Select one)
Select an answer

Refer to exhibit. An architectural designer needs to create the sloped roof shown in the exhibit. Which tool should be used to slope the roof?

(Select one)
Select an answer

Refer to exhibit. An architectural designer needs to create the highlighted geometry. Which tool should be used to create the form?

(Select one)
Select an answer

Where is the leader arrowhead controlled for a text note?

(Select one)
Select an answer

Refer to exhibit. An architectural designer is configuring the stairs shown in the exhibit. What type of supports should be selected?

(Select one)
Select an answer

An architectural designer is creating a wall schedule. The designer only wants to show walls of the Brick on Metal Stud type. How should this be accomplished?

(Select one)
Select an answer

An architectural designer has a linked architectural model and wants to place rooms inside of the link. Revit does not recognize any of the elements as room bounding though. What should be done?

(Select one)
Select an answer

An architectural designer is working on a project for an existing building. A team member has used a laser scanner to scan the building. The scan file can be used in Revit. Which tool should be used to link the file?

(Select one)
Select an answer

An architectural designer needs to create a repeating detail type for a brick. What should be created first for the brick?

(Select one)
Select an answer

An architectural designer has an MEP model where air terminals are placed. The designer wants to use the air terminal locations to place generic air terminals in the architectural model. What should the designer do?

(Select one)
Select an answer

What must be added to a dimension type for the dimension to show both imperial and metric units?

(Select one)
Select an answer

An architectural designer needs to create a family that can be hosted to a wall or a ceiling. Which template should be used to create the family?

(Select one)
Select an answer

What must be turned on to perform a solar study?

(Select one)
Select an answer

In which dialog is the Layer naming convention for exported CAD files controlled?

(Select one)
Select an answer

An architectural designer has created a drafting view with a detail. The designer wants to use the detail in another project. Which tool should be used?

(Select one)
Select an answer

An architectural designer wants to create a new central model from an existing workshared project. When opening the project, which option should be selected?

(Select one)
Select an answer

An architectural designer needs to create a detail using detail components. The detail should be independent of the building model. What type of view should be used?

(Select one)
Select an answer

An architectural designer is working on a project with design options. The designer needs to edit multiple walls but is not sure which design option the walls belong to. Which tool can be used?

(Select one)
Select an answer

An architectural designer needs to create a new brick material based on an existing brick material. The same material assets need to be used. Which process should be used?

(Select one)
Select an answer

Which two items can a project parameter be applied to? (Select two.)

Select up to 2
Select an answer

The Phase of a view is set to New Construction. The Phase Created parameter for an element is set to Existing and the Phase Demolished parameter is set to New Construction. What is the phase status of the element in the view?

(Select one)
Select an answer

Which view property can be switched between True North and Project North?

(Select one)
Select an answer

Where is the save location of workshared local copies controlled?

(Select one)
Select an answer

What should be created when the same set of sheets needs to be printed and exported to PDF multiple times?

(Select one)
Select an answer

Refer to exhibit. The Phase of a view is set to New Construction and the Phase Filter is set to Show Previous + New. What will control the graphic display of Existing elements?

(Select one)
Select an answer

An architectural designer is creating a browser organization scheme. The available options to group by do not work for what the designer wants to do. What should be done to further customize the browser organization?

(Select one)
Select an answer

Refer to exhibit. An architectural designer encounters the situation shown in the exhibit. The designer wants to connect the wall to the roof. Which tool should be used to accomplish this?

(Select one)
Select an answer

Refer to exhibit. An architectural designer has created four revisions. The designer wants the revisions to be numbered 1A, 1B, 2A, 2B. How can this be accomplished?

(Select one)
Select an answer

An architectural designer is working on a door family. The material for each geometric form needs to be controlled in the project. How can this be accomplished?

(Select one)
Select an answer

Refer to exhibit. The Phase of a view is set to New Construction and the Phase Filter is set to Show Complete. What will control the graphic display of Demolished elements?

(Select one)
Select an answer

Refer to exhibit. An architectural designer is reviewing the instance properties of a room and notices that the Volume is set to Not Computed. How can this parameter be calculated?

(Select one)
Select an answer

Refer to exhibit. An architectural designer is working on a room schedule. The designer has grouped the schedule by Level and added a Footer with Title, count, and totals selected. However, the total Area is not showing. What needs to be done to show the total Area?

(Select one)
Select an answer

An architectural designer is creating a room tag family. The designer wants the tag to reference the room Name and Number parameters. How can this be accomplished?

(Select one)
Select an answer

Refer to exhibit. An architectural designer is working on a door schedule. The Width and Height parameters are both added in one schedule column. How is this accomplished?

(Select one)
Select an answer

Refer to exhibit. Based on the drawing area, what view state is currently active?

(Select one)
Select an answer

An architectural designer is working on a building model with multiple areas. The designer wants to create furniture plans and dimensioned floor plans with the exact same crop regions. Which feature should the designer use?

(Select one)
Select an answer

An architectural designer needs to create an opening in a sloped roof. The opening needs to be perpendicular to the outer surface of the roof. Which opening tool should be used?

(Select one)
Select an answer

An architectural designer is working on resolving warnings in a project. The designer has the element ID of an element associated with a warning. Which tool should be used to select the element?

(Select one)
Select an answer

Refer to exhibit. An architectural designer needs to create the condition shown in the exhibit. The bottom extension of the outer brick layer needs to be adjusted independently of the other layers in the wall. How can this be accomplished?

(Select one)
Select an answer

An architectural designer creates an area plan. Some of the automatically generated area boundary lines are incorrect. What should the designer do to get the correct area boundaries?

(Select one)
Select an answer

An architectural designer needs to remove several families from a project that are no longer needed to help reduce the file size. Which tool should be used?

(Select one)
Select an answer

49/49 questions left unanswered