Module quiz

Several new components equivalent to the number of sub-components in the initially selected component are added under the top-level of the entire assembly.

A new component containing a single primitive body is added as a sub-component to the top-level of the initially selected component, while all other sub-components are hidden.

The original component’s sub-components and bodies are all hidden, and a single primitive body is added under the initially selected component.

The original component, along with its sub-components, is removed and replaced with a single component containing a single primitive body.

Capture the position of the components in the Design workspace.

The locations must be defined using the Press Pull tool in the Design workspace.

The locations must be defined using the Edit Form tool in the Form toolset.

Capture the position of the components in the Edit Model toolset.

Modifications to the Generative Model are only carried to the original assembly if a Connector Obstacle was created.

Modifications to the Generative Model are carried to the original assembly in the Design Workspace.

Modifications cannot be made in a Generative Design study, they must be made in the Design workspace prior to study setup.

Modifications are only local to the Generative Model in which they are made and are not seen in the original assembly.

Edit Model enables users to create freeform Starting Shapes that will be the basis for the Generative Design solver to create its geometry.

Edit Model is only available for studies created in the Simulation workspace, not in Generative Design.

Edit Model enables users to modify a design for a Generative Design study without making changes to the original design.

Edit Model allows a user to post-process Generative Design outcomes if they need further refinement after exporting.

Connector Obstacle bodies have different material properties.

The workflows are identical.

Connector Obstacle bodies are pre-selected as obstacle geometry.

Connector Obstacle bodies are pre-selected as a Starting Shape.