20 min.

Marking Up Shared Views for Better Coordination in Autodesk Viewer (for non design software users)

Module overview

The focus of this content is adding comments, measurements, and markups in the Autodesk Viewer, which provides non-Revit users with an easy way to share critical information with the larger team.

This content takes approximately 20 minutes to complete. By the end, you should be able to:

  • Comment and review comments in shared views.
  • Measure distances in the Autodesk Viewer.
  • Mark up shared views with sketches, arrows, clouds, and text.


This content requires user-level knowledge of Revit and is focused on best practices and its industry applications. If you don't have experience with this product, we recommend you to take foundational training using one of the resources below:

Before you start

  • Please make sure you have the Revit software loaded.
  • If you have technical difficulties, please reach out to product support

Module downloads

These downloadable resources will be used to complete units in this module:

Module outline

  • Introduction - Marking Up Shared Views for Better Coordination