Outline
  • Up next:Design modeling for Revit

Pre-test

Before you begin this course, test your skills by taking the following assessment to see where you stand. 

Keep track of your incorrect answers to know which skills you should study. You'll have a chance to take this same practice test again at the end of the course to see how you've improved.

Pre-test

55 questions

1. What can be accomplished in the Visibility/Graphic Overrides dialog?

Error: Select an answer

2. How are selection filters created?

Error: Select an answer

3.
Refer to the exhibit. A designer wants to control several view settings with a view template. After assigning a view template to a view, the View Scale can still be adjusted in the View Control Bar. Why is this happening?

Error: Select an answer

4. A designer wants to use a wood material, but it is not available in the Material Browser. How can the designer add a wood material to the project?

Error: Select an answer

5.
Refer to the exhibit. What happens when you change the sequence of revisions in the Sheet Issues/Revisions dialog?

Error: Select an answer

6. Which of the following two methods can be used to cut a horizontal or vertical projection from a wall? (Select 2)

Select 2 answers below.
Error: Select 2 answers

7. A designer wants to have a parameter that creates a number of elements “x” over the Length. Which of the following is the best example of what that formula should be?

Error: Select 2 answers

8. When creating a new family, how do you control that it is a face-based family?

Error: Select 2 answers

9.
Refer to the exhibit. A designer is adding windows to exterior walls. The full-height windows are visible, but the smaller windows are not showing in the view. What should the designer check to fix this issue?

Error: Select 2 answers

10. A designer is working with a Civil Engineer that is using CAD. The designer receives as DWG file and wants to use it in Revit. How should the designer handle the CAD file so that any future updates to the DWG file will be visible in Revit?

Error: Select 2 answers

11. What is a detail view represented by?

Error: Select 2 answers

12.
Refer to the exhibit. A designer is exporting a model to DWG. The designer needs to export the model based on the internal origin. Where should the designer click to adjust this setting?

Error: Select 2 answers

13. A designer wants to place the sun location in Revit. What should the designer do before this?

Error: Select 2 answers

14.
Refer to the exhibit. What does the 3D next to the level mean?

Error: Select 2 answers

15. How is the layout of a curtain wall type created?

Error: Select 2 answers

16. Which of the following methods can be used to organize a color fill legend?

Error: Select 2 answers

17. A designer is modeling doors and windows, but the families are not available in the project. What should the designer do to get additional door and window families in the project?

Error: Select 2 answers

18.
Refer to the exhibit. A designer is creating an office chair family. The designer wants to have a parameter to control the visibility of the chair arms in a project. What type of parameter should this parameter be?

Error: Select 2 answers

19. A designer wants to add a parameter to system family categories and loadable family categories. What type of parameter should the designer create?

Error: Select 2 answers

20. What controls how a brick material will appear in the Shaded visual style?

Error: Select 2 answers

21. Which of the following component types can be hosted by ceiling elements? (Select 2)

Select 2 answers below.
Error: Select 2 answers

22.
Refer to the exhibit. A designer creates a ceiling in the Level 1 floor plan view and receives the following Warning. The Ceilings category is visible in the view. How can the designer view the ceiling?

Error: Select 2 answers

23. Which of the following best describes the hierarchy of elements in a Revit project?

Error: Select 2 answers

24. Which of the following elements can be opened and modified in the Family Editor?

Error: Select 2 answers

25. A designer creates a sheet using a custom title block. The designer wants to include a parameter to indicate the building area. How can this be accomplished?

Error: Select 2 answers

26. What does it mean to compact a central model?

Error: Select 2 answers

27. Which branches in the Project Browser can be organized with a browser organization scheme?

Error: Select 2 answers

28.
Refer to the exhibit. When should Duplicate with Detailing be used?

Error: Select 2 answers

29. The Computation Height parameter controls the height at which the perimeter and volume for rooms is calculated. Where can this parameter be adjusted?

Error: Select 2 answers

30. A designer is working with components in the ceiling. The components are not showing in the appropriate rooms in schedules. What should be adjusted to fix this issue?

Error: Select 2 answers

31.
Refer to the exhibit. The Phase of a view is set to New Construction and the Phase Filter is set to Show Previous + New. What will control the graphic display of Existing elements?

Error: Select 2 answers

32. What do design options help accomplish?

Error: Select 2 answers

33. What is worksharing?

Error: Select 2 answers

34. Which of the following is an example of subtractive modeling using the massing tools?

Error: Select 2 answers

35. A designer is working with a room schedule. The designer only wants to see rooms that are offices in the schedule, and not restrooms, break rooms, etc. How should this be accomplished?

Error: Select 2 answers

36. What is the phase filter setting for a typical demolition plan?

Error: Select 2 answers

37.
Refer to the exhibit. A designer is creating a wall and wants to specify the Unconnected Height parameter but it is unavailable in the Properties palette. What should be done to make the Unconnected Height parameter available?

Error: Select 2 answers

38. A designer is creating a door family. The designer creates and extrusion and wants the length and width to adjust for various family types. How can this be accomplished?

Error: Select 2 answers

39.
Refer to the exhibit. A designer is creating a repeating detail family. The designer wants the spacing between each CMU block to be the same in the repeating detail. Which Layout method should be selected?

Error: Select 2 answers

40.
Refer to the exhibit. What can be added to the model prevent the toposurface from passing through the building?

Error: Select 2 answers

41. A designer has a linked CAD file from a Civil Engineer. The designer wants to use the coordinate system setup in the CAD file. Which tool can be used to update the Revit project with the coordinates from the CAD file?

Error: Select 2 answers

42. Which of the following Opening commands cuts an opening thru multiple floors at the same time?

Error: Select 2 answers

43.
Refer to the exhibit. A designer wants to adjust the horizontal rail indicated in the image. Where should the designer click in the Type Properties dialog?

Error: Select 2 answers

44. How are text styles created in Revit?

Error: Select 2 answers

45. For which of the following scenarios would a stacked wall be useful?

Error: Select 2 answers

46. A designer needs to adjust the line weight for all walls in one floor plan view. Which dialog should the designer use?

Error: Select 2 answers

47.
Refer to the exhibit. What happens when you click the icon below a temporary dimension?

Error: Select 2 answers

48. A designer has two active projects. In one project, several wall types have been created. The same wall types are needed in the other project. What should the designer do to get the wall types in the other project?

Error: Select 2 answers

49. Which of the following options is available when placing architectural columns?

Error: Select 2 answers

50. A designer needs to create a new sheet. How does the designer specify the size of the sheet?

Error: Select 2 answers

51. An interior designer and architect are working on the same project. The interior designer wants to link the architectural model and use the levels that were already created. Which tool should the interior designer use to be able to duplicate the levels and be notified when a move occurs?

Error: Select 2 answers

52. A designer wants to check for clashes in a project. Which tool should be used?

Error: Select 2 answers

53. Which of the following methods is used to join a wall to a roof and have the wall shape conform to the underside of a roof.

Error: Select 2 answers

54. A designer is creating a door family. The designer wants to show the door swing in plan views but not 3D views. What should the designer use to create the door swing?

Error: Select 2 answers

55. What is a detail component?

Error: Select 2 answers

Error: 55/55 questions unanswered
55/55 questions unanswered
  • Up next:Design modeling for Revit

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

${RESELLERNAME}