• Up next:Create a CAM setup
Professional | ~1 hr. 55 min.
Learn to machine slopes and curves
Module | Skill builder

In this module, you create a CAM setup for a 3-axis vertical milling center and begin to rough and finish operation 1 of the course part.  The first 3-axis geometry to tackle will be slopes and curves.  Isolate toolpaths to areas and faces to make the most efficient cuts possible.

After completing this module, you’ll be able to:

  • Create a CAM setup.
  • Rough a 3-axis part.
  • Create a 3-axis finishing toolpath on a specific face.
  • Create a 3-axis finishing toolpath in a specific boundary.
  • Identify critical toolpath settings for finishing.
Download resources
  • Up next:Create a CAM setup

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.