Outline
  • Up next:Adaptive clearing and roughing toolpaths

Challenge exercise

Create an inch CAM setup for the supplied file complex stepped pocket - wc.f3d. Create a new milling setup making sure to identify the part and fixture. Stock should be the exact size of the part and create all toolpaths to cut the part then post the NC code.

The following steps/items are required:
• Create a new milling setup.
• Create toolpaths to rough and finish the part.
• Use tools from the sample library that can cut all internal geometry.
• Simulate the toolpaths.
• Post NC code.

Challenge

It appears you don't have a PDF plugin for this browser.

  • Up next:Adaptive clearing and roughing toolpaths

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

${RESELLERNAME}