• InfraWorks

Use Model Builder to Display the Site and Add GIS Data (for LearnOne)

Selecting the right site for a building can make a big difference in the cost of the project. Selecting a site with transportation access to it, enough space for ample parking, and appropriate building codes and zoning can determine if the project gets approved or not. In this module, you learn how to use Model Builder to display the site. Then, you learn how to connect GIS data to the InfraWorks model and run a proper GIS analysis before selecting the project site.


Module overview

Selecting the right site for a building can make a big difference in the cost of the project. Selecting a site with transportation access to it, enough space for ample parking, and appropriate building codes and zoning can determine if the project gets approved or not. In this module, you learn how to use Model Builder to display the site. Then, you learn how to connect GIS data to the InfraWorks model and run a proper GIS analysis before selecting the project site.

This module takes approximately 20 minutes to complete. By the end of the module, you should be able to:

  • Create a model within minutes using the InfraWorks Model Builder
  • Add data from GIS sources to the InfraWorks model
  • Analyze the model using Themes and Styles

Before you start

  • Please make sure you have the InfraWorks software loaded.
  • If you have technical difficulties, please reach out to product support
  • To collaborate with other industry professionals taking the module, or if you have questions or feedback during the module, please visit the InfraWorks Forum.

Module downloads

These downloadable resources will be used to complete units in this module:

Module outline

  • Introduction to Use Model Builder to Display the Site and Add GIS Data

Related learning

Module30 min.
BIM Collaborate

View
Module20 min.
InfraWorks
Course40 min.
BIM 360, Build
Course3 hr. 15 min.
BIM 360, Build
Course9 hr. 50 min.
Revit, Civil 3D, BIM Collaborate
Course3 hr.
BIM 360
Course1 hr. 30 min.
BIM Collaborate
Course3 hr. 25 min.
InfraWorks, ReCap, Civil 3D
Course2 hr. 35 min.
Revit, Revit LT, BIM Collaborate
Course35 min.
InfraWorks