• Factory Design Utilities
  • AutoCAD
  • Inventor

Create and simulate factory layouts using Factory Design Utilities and ProModel


Course overview

This learning series will demonstrate the development of 2D and 3D factory layouts using Autodesk Factory Design Utilities and how the performance of proposed facilities can be evaluated using ProModel. Beginning in AutoCAD, you will utilize the 2D representation and/or PointCloud of the existing facility and begin to develop the machinery layout using the Factory Asset Library previously developed in Inventor. Iterations of the proposed operations layouts can be synced to ProModel to evaluate the performance of production cycles.

Upon completion, you will be able to:

  • Use factory assets to create a factory layout in AutoCAD and Inventor.
  • Create a ProModel simulation for an existing factory layout in AutoCAD or Inventor.
  • Evaluate and take action on ProModel simulation results.

  Before you start 

  • Please make sure you have the AutoCAD, Inventor, Factory Design Utilities, and ProModel software loaded.
  • If you have technical difficulties, please reach out to product support.

Course downloads

These downloadable resources will be used to complete modules in this course:

Related learning

Course1 hr. 30 min.
Factory Design Utilities, Inventor, Vault Professional...

Course2 hr.
Factory Design Utilities, Vault Professional, AutoCAD...
Course30 min.
Factory Design Utilities, Inventor, AutoCAD
Course36 min.
Factory Design Utilities, AutoCAD, Inventor
Module30 min.
Inventor
Course1 hr.
Factory Design Utilities
Module30 min.
Factory Design Utilities, Inventor, AutoCAD
Module30 min.
Revit, Inventor
Course2 hr.
Factory Design Utilities, Vault Professional, AutoCAD...
Module30 min.
AutoCAD