20 min.

Reviewing, managing, and resolving clashes in BIM 360

Module overview

Welcome to Reviewing and Managing Clashes. Once the clashes are automatically detected in the BIM 360 Model Coordination module, you then use the tools in this module to review those clashes, create issues, or change a clash to a non-issue. You then manage the issue resolution process by downloading those issues inside Revit and actioning them. 

This module takes approximately 20 minutes to complete. By the end of the module, you should be able to: 

  • Manage clashes and create issues  
  • Resolve clashes and action issues in the Document Management module 
  • Review resolved clashes and update the issues

Module pre-requisites

This module requires user-level knowledge of BIM 360 and is focused on best practices and its industry applications. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:

About the author

This module was created by Deepak Maini.

Before you start

  • Please make sure you have the BIM 360 software loaded.
  • If you have technical difficulties, please reach out to product support

Module outline

  • Introduction