Creating Toolpaths for a CNC Lathe - CNC lathe stock handling | Autodesk

Creating Toolpaths for a CNC Lathe

Outline

1

Getting started

Module overview

Course overview

Get the software

Course resources

2

Set up and cut a profile

Module overview

Create a CNC lathe setup

Create an external roughing toolpath

Create an external finishing toolpath

Machine internal geometry

Profile leads and transitions

Practice exercise

Challenge exercise

3

Internal and external grooving toolpaths

Module overview

Use the single groove toolpath in Fusion 360

Create a groove roughing toolpath

Create an internal groove roughing toolpath

Duplicate a toolpath

Practice exercise

Challenge exercise

4

Threading, chamfering, and C-axis operations for turning

Module overview

Cut chamfers with turning toolpaths

External threading

Drill and tap for turning

C-axis drilling

Practice exercise

Challenge exercise

5

CNC lathe stock handling

Module overview

Review a CNC lathe setup

Parting a CNC lathe part

Multiple lathe spindles

Finishing a stock transfer

Practice exercise

Challenge exercise

6

Course challenge

Module overview

Course challenge

7

Practice test

Module overview

Start your practice test

Associate | ~1 hr.

CNC lathe stock handling

Module | Skill builder

Learn how to finish a part with a manual part-off operation or while using multiple spindles to handle stock transfers.

After completing this module, you'll be able to:

Explain the need for stock transfer.
Create parting toolpaths.
Create stock transfer and sub-spindle operations.

Download resources