Associate | ~1 hr. 30 min.
Course challenge
Module | Skill builder

This challenge is designed to help you to explore the tools you have learned. There's no single correct solution. Instead, use this as an opportunity to practice skills to creatively solve a design challenge. You can either use the output of the previous challenge or upload the provided dataset parting – lc.f3d to a location inside your project. Perform a stock transfer using a Turning toolpath sequence of Spindle Chuck, Part, and Spindle Return. For the Turning Part toolpath, use an OD Groove tool from the Fusion 360 Library, or create a custom tool.

The following steps/items are required:

  • Create a Turning Secondary Spindle Chuck operation.
  • Create a Turning Part operation with the specified tool.
  • Create a Turning Secondary Spindle Return operation.
  • Verify that the Turning operations are executed correctly by using the Simulate tool.

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

${RESELLERNAME}