What if we—Autodesk, Inc.—would use our own technologies for our own needs? In this class we will show you how we applied interesting workflows involving the following software: ReCap software, Revit software, BIM 360 Glue software, BIM 360 Layout software, and Point Layout to retrofit the Autodesk Paris office. After having generated a 3D model in Revit software based on point clouds reflecting existing conditions that we got from 3D scans, we made a retrofit proposal and used BIM 360 Layout software to stake out data into the field with a robotic total station. Finally, we used BIM 360 Layout capabilities to verify the as-built construction and update the model. This session features BIM 360 Layout, ReCap, and Revit. AIA Approved
- Understand workflow from 3D scan to the field
- Learn how to take BIM to the field with BIM 360 Glue and BIM 360 Layout
- Learn how to value BIM 360 solutions to meet the construction needs
- Learn how to use reality-capture equipments
Olivier Bayle has over 19 years of experience in structural design in a variety of fields ranging from simple construction schemes to highly technical engineering projects. Prior to coming to Autodesk, Inc., through the Robobat company acquisition, Bayle worked as civil engineer in steel, concrete, and timber design. At Autodesk, Bayle has further engaged clients with Building Information Modeling (BIM) and reality capture solutions; workflow integration; and the development of best practices in 3D visualizations, clash/collision detection, and 5D construction simulations. Bayle holds a Graduate Civil Engineer degree from Clermont-Ferrand, France.
Based in Autodesk, Inc.’s, Paris office in France, Julien Drouet is senior technical specialist in the EMEA (Europe, the Middle East, and Africa) Architecture, Engineering, and Construction (AEC) Team, focused on the construction and MEP (mechanical, electrical, and plumbing) portfolio. Julien is an electrical engineer with 20 years’ experience in the building, engineering, and construction industry. He has been involved in Autodesk’s MEP product adoption for 10 years, and he’s been in charge of the MEP Fabrication Solutions since Autodesk’s first MEP fabrication product release.