Before attending this class, we recommend visiting and participating in the Autodesk Factory Experience on the exhibition floor. Prototyping while developing a new product design is critical to ensure delivery of higher-quality parts to market. This step in the product design cycle is, however, typically time-consuming and costly through iterating and purchasing/making individual parts. This is why many product designers have already turned primarily to digital prototyping rather than physical prototyping, so they can ensure on-time product delivery that doesn’t break the bank. This class will focus on how you can utilize Fusion 360 and its extensions for digital prototyping, focusing on an Autodesk Factory assembly product. Consumer electronics is a fast-moving segment, where time and collaboration is critical to be ahead of the competition. We’ll demonstrate how to effectively experiment with product design alternatives, collaborate with key project stakeholders, test layouts for PCB, simulate structural and manufacturing aspects, and render final product previews, all within Fusion 360.

Looking for an easy way to add wireless communications to a project? Wi-Fi, Bluetooth, Zigbee? Wireless electronics is considered by many to be a dark art, even electrical engineers! However, today’s modular hardware and simplified software resources has made it possible for even nonelectrical engineers to successfully add wireless communications to their designs. This course is for mechanical engineers, industrial designers, architects, and software engineers looking to control objects wirelessly or gather data from devices or systems remotely. Spend time with us learning to add Wi-Fi to your next project! Using Eagle, we will build a small sensor-based system that posts data to the cloud and responds to commands from your browser. Some familiarity with embedded software platforms, including Arduino, Raspberry Pi, or similar will be helpful but is not required. Familiarity with breadboarding concepts will also be helpful.

Are you an Industrial Designer looking to add light or color or sound to an object?Are you a mechanical engineer looking to add sensors or motion control to a system?Are you an architect looking to transform spaces by controlling the room around you?If so, this course is for you!

This course is an intro to electronics design using Autodesk EAGLE and focuses on practical electronics for the non-EE.Spend 60 minutes learning about the design and fabrication of the most fundamental of elements in any electronic system, the Printed Circuit Board (PCB).In this course, we will learn what a PCB is and even design our own PCBs from scratch.We will learn the range of modular electronics options available which simplify electronics design and make design accessible for non-engineers.

Electronics can be difficult to design due to the reliance on various assembly components. Add to that the occasional need to swap between various software applications when designing specific components, such as the PCB, it can become difficult to get everything sync’d up and a more wholistic picture of the design. This class will showcase how a part designer can use Fusion 360 for everything from part design, PCB design, and even manufacturability.

Many of the products we design and finally use are developed in mechanical CAD software. However, in almost all products, you’ll also find an electronic part. Without them, most products would be pointless. With the two Autodesk programs Fusion 360 software and EAGLE software, these two worlds grow together. This class will provide insight into the world of electronics. We intend to explain very basic things: What is a printed circuit board (PCB) and how is it manufactured? Which electronic components are used? How is an electronic layout created in EAGLE and how can a mechanical engineer use, change, and create a layout in Fusion 360? These basic questions will be explained using some illustrative examples.

We invite customers who have a need to simulate thermal management of electronics to attend this roundtable. We plan on discussing and discovering common electrical computer-aided design (ECAD) and mechanical computer-aided design (MCAD) workflows, going from ideation, conceptual layout, and final design. Thermal management fits in this design process throughout and we will present some mockups on how we see the next generation of simulation fitting into the design process. We hope to gain insight from the roundtable regarding how participants currently manage the ECAD data and use it along with MCAD data to perform thermal simulation, where their struggles are, and what could be done to make everything easier. This session features CFD, Forge, and Fusion 360.

In this class, we'll use the case study of designing a lab power supply. This is a common tool in electronics and by working through its design, we'll highlight how the electronics workspace, e-cooling simulation, and mechanical modeling can all be capitalized on to simplify and expedite the production of this product. As we go through the case study, we'll clearly demonstrate the benefits of having all of these tools in one application—namely, faster product development with fewer rework cycles.

The challenge that all electronic designers encounter is acquiring or building components that will be used in their products. The added variant to this already elaborate process is building or generating 3D models that need to be associated for effective mechanical modeling. For this presentation, we will be showing techniques used to build electronic component footprints with associated 3D models. We will also teach you how to create 3D models of electronic components using Fusion 360 software.

Inventor software is Autodesk's top tool for mechanical design. Fusion 360 software provides the electronics designer with a great tool for printed circuit board (PCB) design. In agile product development, it is important that these two very different engineering disciplines work closely together, especially because more and more products are made up of PCBs in addition to mechanical components. In this session, you will learn how to set up an effective workflow for mechanical and electrical design.

In this instructional demo, we’ll show how Fusion 360 Electronics software can be maximized with Fusion 360 strong modeling tools to produce a distortion-effect pedal end to end. We'll discuss the design of the effect in detail, as well as how having an integrated workflow between electronics and mechanical tooling simplifies and expedites the design process. Throughout the demo, we will be highlighting the specific features in Fusion 360 that enabled us to go from idea to completed prototype.

This class demonstrates the use of Fusion 360 software as a service throughout various stages of product design, while taking advantage of the software's intuitive approach and versatile modeling modes. The class combines quick demos and project examples in areas such as consumer products, sports equipment, and packaging. Attendees discover how Fusion 360 makes it easy to turn early concepts into final designs as part of the Autodesk® Product Design Suite. The class also highlights the exciting opportunities that Fusion 360 provides for cloud-based collaboration, thanks to the Autodesk® 360 cloud services hub.

Modern consumer products and industrial machines are made up of hundreds or thousands of components to form large assemblies. These components could be machined, 3D printed, moulded, electrical, electronic, or off the shelf items using various manufacturing and design processes. Effectively managing these assemblies can be a real challenge for companies with multi-disciplinary teams who simultaneously contribute to the project from all Fusion 360 workspaces. This technical instruction will provide attendees with techniques and methods to improve their development process when creating large assemblies. Such methods will include: Simplifying into sub-assemblies, using top-down or bottom-up modelling where appropriate, using the manage extension for data traceability and simplifying geometry with configurations to reduce the load on the PC. Attendees will learn new and improved ways to optimize their product development and collaborative processes.

Solar energy is clean and limitless, and the operational costs are close to nothing once you’ve installed a solar panel as no fuel is needed to create a considerable amount of energy. And a single kerosene wick burns an estimated 80 liters of fuel, producing more than 250 kilograms of carbon dioxide per year. To help people living in remote places with limited access to electricity, we made a low-cost solar light bulb as a replacement to a harmful kerosene lamp. We will share the technical workflow while creating the solar lamp inside the Fusion 360 Electronics and Modeling workspace, demonstrating an effective ECAD—MCAD collaboration.

Educators! Have you been tasked with teaching digital modeling and/or 3D printing? In this session, learn step-by-step, tutorial projects for simple consumer items. You can take these fun, actionable projects back to your classes to help get students started. Projects will include: Finding sketches on the internet, turning them into SVG files with an online converter, and using Fusion 360 to turn them into a cookie cutter and business card; Using Recap Photo to turn smartphone snaps of a statue into a reality capture model, importing the model into TinkerCAD, and editing it into a candy jug.

We are entering an era in which the consumer is both the designer and the manufacturer: DIY creations on Kickstarter; 3D printers in your home; increasingly affordable computing and components; membership-based workshops filled with digital fabrication tools; and open-source electronics, combined with design techniques that create new, unique—and often highly creative—inventions and applications. The democratization of technology and the rise of the maker subculture are changing who does the work of design, and how they conceive, explore, and fabricate things. Are we all designers now? Or is this more hype, similar to the promise of the Jetsons™ and the paperless office? Join us to hear more from speakers—from an array of disciplines—who will share their stories, talk about how the “make-it-yourself” mindset is driving innovation, and discuss where this DIY movement is really heading. This session features Eric Wilhelm, founder of Instructables; David Lang, co-founder, OpenROV; Schuyler St. Leger, enthusiastic amateur maker; Jason Chua and team, SparkTruck, Stanford d.School; Ben Kaufmann, CEO, Quirky.com; and Anne Filson and Gary Rorhbacher, partners at Filson and Rohrbacher and co-founders of AtFAB.

This class will demonstrate how Forge consumers can incorporate Google voice commands into their Enterprise Forge software. We’ll walk through a groundbreaking application where a field tech equipped with nothing but a cell phone can send voice commands to dynamically create a storage facility next to an existing BIM 360 commercial building. A design reviewer will be able to see and review the new storage facility in BIM 360 within minutes, providing real-time feedback. The field tech can use Google Voice Actions to provide size, material, and other preferences to make the model truly dynamic. You will discover how creating a model in the field can be done hands free without clicks or taps. We’ll also walk through the relevant technologies that made it happen, including Google Voice, Forge Design Automation for Revit, BIM 360 Docs software, and BIM 360 Viewer.