This lab will teach fabrication scripting for Fabrication CADmep software, Fabrication ESTmep software, and Fabrication CAMduct software, using *.COD scripts. It assumes no prior knowledge of COD scripting and will walk you though how to create and test scripts to bulk modify properties of Fabrication content.

Annotation of shop drawings in Fabrication CADmep software can be a time-consuming process, and if it is not done properly, it can have devastating results. This class will cover these struggles in detail, along with looking at solutions in the Fabrication CADmep 2016 software release. We will describe the best practices for getting shop drawings produced with the correct annotation sizes per viewport, as well as tips for moving text in a single viewport and NOT the others. We will also touch on best practices when using CTEXT—creating the block and report to go along with it—to ensure proper scaling within viewports. Fabrication CADmep 2016 software also has a new command for text placement location using LISP routines. We will show examples of each of these advanced tips and tricks, and we will have discussion time at the end.

Do you need an expanded database of fabrication parts? In this session, we'll show you how to build a custom part from scratch in Fabrication CADmep software, and how to add it to your database to be used in your configuration within Revit Fabrication. This technical instruction will also give you an idea of a new workflow for furthering the Revit design-intent model to detail for fabrication intent. This workflow has the potential to improve project quality as well as save time and money.

In this class, we will explore how to utilize Fabrication Parts in Revit software by taking a Revit project and going through the Design-to-Fabrication workflow. Once this has been reviewed and is complete, we will export a Fabrication file from Revit software into Fabrication ESTmep software. Once inside Fabrication ESTmep software, we will review the contents of the project and make any changes required. Then, utilizing the new Estimating Summary options, we will review pricing and labor and make any adjustments necessary. Once this is complete, we will review our options for sending the .MAJ to Fabrication CAMduct software and Fabrication CADmep software. This session features Revit MEP and Fabrication CADmep.

In 60 minutes, you'll learn 60 all-new tips and tricks for Fabrication CADmep software, Fabrication ESTmep software, and Fabrication CAMduct software. No frills or long lectures-just a few product veterans in a tag-team-style, rapid-fire demonstration. This session will be fast paced, so we'll have no time for questions, but we'll gladly follow up with all attendees after Autodesk University to address any questions.

Learn advanced skills that capitalize on the new Fabrication functionality in Revit 2018 software. Using Revit schedules, assemblies, tags, views, interference checking, and new features in Revit 2018, we can produce fabrication documentation inside the Revit software interface, which lets us fully coordinate with design consultants. We'll cover how to model using Fabrication Parts; how to convert a design model into Fabrication Parts; how to use assembly views to create spools sheets and details; how to annotate Fabrication Parts in plan view and 3D; how to coordinate with other consultants in Revit software; how new Revit 2018 features relate to Fabrication Parts; and how to import existing as-built conditions from Fabrication CADmep software into a new renovation project. This session will feature Revit and Fabrication CADmep.

This class will cover all aspects of the ductwork pressure-class specification setting used by Fabrication CAMduct software, Fabrication CADmep software, and Fabrication ESTmep software. We will cover all aspects of how to create and understand the components and related ancillaries linked to shop-fabrication standards as defined in the Fabrication software database setting. Because the database is integrated with estimating and detailing, we will also show which setting in Fabrication CAMduct software will affect the Fabrication ESTmep cost and the Fabrication CADmep graphics. We will also examine effective practices for setting up duct fittings and straight lengths for reinforcement through stiffiners (internal, external, or both) on order to comply with SMACNA (Sheet Metal and Air Conditioning Contractors National Association) and DW/144 specifications guidelines. Finally, we will cover the duct connector settings on the round, rectangular, and oval patterns, and we'll discuss the relationships between the duct patterns' dimensions and computer numerical control (CNC) notch profiles as defined in the Fabrication CAMduct software database.

No frills, no long lectures. Hang on to your hat and take quick notes. In 60 minutes we'll cover 60 tips for using Fabrication CADmep software. Ready. Set. Go.

In this class, we will explore how to utilize Fabrication Parts in Revit software by taking a Revit project and going through the Design-to-Fabrication workflow. Once this has been reviewed and is complete, we will export out a Fabrication software file from Revit software that we will open up in Fabrication ESTmep software. Once inside of Fabrication ESTmep software, we will review the contents of the project and make any changes required. Then we’ll utilize the new estimating summary options to review the pricing and labor, and we’ll make any adjustments necessary. Once this is complete, we will review our options for sending the .MAJ to Fabrication CAMduct software and Fabrication CADmep software. This session features Revit MEP and Fabrication CADmep.

Design Line is a powerful fabrication tool and this class focuses on getting the most out of it. We discuss valuable Design Line tools and ways of using them in your daily workflow. These tips apply to both Autodesk® Fabrication CADmep™ and Autodesk® Fabrication ESTmep™.

In 60 minutes, you'll learn 60 all-new tips and tricks for Fabrication CADmep software, Fabrication ESTmep software, and Fabrication CAMduct software. No frills or long lectures-just a few product veterans in a tag-team-style, rapid-fire demonstration. This session will be fast paced, so we'll have no time for questions, but we'll gladly follow up with all attendees after Autodesk University to address any questions.

Learn advanced skills capitalizing on the new Fabrication functionality in Revit 2017 software. Using Revit schedules, assemblies, tags, views, interference checking, and new features in Revit 2017 software, we can produce fabrication documentation inside of the Revit software interface, which enables us to be fully coordinated with design consultants. While Fabrication Parts was introduced in 2016, it was in Revit 2017 software that they became fully functional while remaining in a single interface. We’ll cover how to model using Fabrication Parts; how to convert the design model into Fabrication Parts; how to use assembly views to create spools sheets and details; how to annotate Fabrication Parts in plan view and 3D; how to coordinate with other consultants in Revit software; how new Revit 2017 software features relate to Fabrication Parts; and how to import existing as-built conditions from Fabrication CADmep software into a new renovation project. This session features Revit and Fabrication CADmep.

Fabrication Content if the single most important thing an MEP firm maintains to facilitate preconstruction. To help you manage that content, this session will teach you the basics of Fabrication (COD) scripting for Fabrication CADmep software, Fabrication CAMduct software, and Fabrication ESTmep software. You need no prior knowledge of scripting. We’ll show you how easy it is to create COD scripts, and how to use them to manage your own Fabrication ITM content.

Autodesk acquired the Autodesk Fabrication product line in October 2011. Since then, there have been two new releases of Fabrication CADmep, Fabrication ESTmep, and Fabrication CAMduct. In this class, you'll get a run down of the new features released in 2013 and 2014 and how to use them, taught by Autodesk Fabrication Software Development Manager, Andy Robins.

Join this ad-hoc, informal panel discussion with Autodesk® Fabrication CADmep™, Autodesk® Fabrication ESTmep™, and Autodesk® Fabrication CAMduct™ experts from some of the most successful and largest mechanical contractors in the United States. You get a chance to ask questions, see answers, listen to guidance and advice and learn tips and tricks from some of the industry's power users.

This session will propel users into Revit 2017 software, exemplifying the advantages of using a singular model throughout the preconstruction process. Learn how to go from design intent to fabrication spools using Fabrication Parts in Revit software. In this session you will convert a Revit design model to fabrication parts, make design and coordination changes, define and detail fabrication spools, and create all construction documentation without ever leaving Revit software. Attendees will gain first access to new Revit 2017 software add-ins that streamline this process with prepopulated templates and content libraries. This hands-on session will reinforce best piping practices, and give users the tools they need to take their businesses to the next level. This session features Revit MEP and Fabrication CADmep.

This session will discuss how to propel your company into Revit 2017 software, exemplifying the advantages of using a singular model throughout the preconstruction process. Learn how Victaulic’s Building Information Modeling (BIM) group made the transition to Revit software to go from design intent to fabrication spools using the improved functionality of Fabrication Parts. In this session we will take a Revit design model and convert to fabrication parts, make design and coordination changes, define and detail fabrication spools, and create all construction documentation without ever leaving Revit software. Attendees will gain first access to new Revit 2017 software add-ins that streamline this process with prepopulated templates and content libraries. The session will reinforce best workflow practices, and give users the tools they need to take their businesses to the next level. This session features Revit MEP and Fabrication CADmep. AIA Approved

Design Line is the service-based detailing tool that is used in Fabrication CADmep and Fabrication ESTmep. Once set-up to your requirements, it can help streamline modeling time significantly. In this lab, representatives from Comfort Systems USA will look down deep into the nuts and bolts of Design Line. They will look at button mapping with loops, terminal styles, managing constraints, design entry carry over setup and setting up fitting extensions for optimization.

In today’s market knowing your bottom line is crucial to getting awarded the next project. Visualizing your takeoffs and understanding what is included in constructing systems can get you closer to an accurate estimate. Fabrication ESTmep is a vital tool for contractors in the mechanical, ventilation, plumbing, and electrical markets. Learn how to set up different areas of the estimating database, automatically take into account ancillaries and supports, as well as integrate back with the other Fabrication products including CADmep, CAMduct, and Tracker.

Effective prefabrication strategies can have a plethora of benefits for your company and the project you are working on, including just-in-time delivery, more efficient material handling, better jobsite installation practices, and increased safety in the shop and on site. In this class, RK Mechanical technical experts will step you through the best practices for preparing your model for prefabrication using the Fabrication CADmep spool sheet functionality, from how to get started to more advanced features such as multi-user spooling.