Back to Profile

Contact partner

Success Story

AutoCAD 를 이용한 2D 도면화

AutoCAD 를 이용한 2D 도면화

Customer challenge

대한송유관공사는 오래된 도면 즉 종이 도면, 필름 도면, 스캔 도면, 등 실물 도면을 전산 데이터 화 목적으로 CAD 도면 화 필요성이 제기되어 CAD 프로그램 AutoCAD Mechanical 도입하고자 하였습니다. 하지만 오래된 도면 종이 도면으로 훼손, 분실에 대한 위험성이 발생이 되었고, 실물 도면을 가지고 있는 관계로 도면을 눈으로 확인하고 찾아야하는 많은 불편함이 있었습니다. 마지막으로 CAD 데이터화가 되어있지 않은 관계로 위험한 보안사고가 발생할 수 있었습니다.

Project goals

1. 업체에서 다년간 축적된 방대한 실물 도면을 도면화 작업을 할 수 없으므로, IMU와 도면 화 프로젝트를 기획하고 협력하게 되었음 2. 2D 도면 자료 확보 – 종이 도면 등 실물 도면을 없애고, 도면 화를 추진하여 데이터화 함 3. 업체의 옛 실물 도면을 확인하여 분류한 후 스캔 작업을 하여 스캔 파일을 이용한 CAD 도면화 작업 진행하는 방식임

Solution

AutoCAD Mechanical 2D 도면을 도면화 및 수정 사용 – 실물 도면을 2D 도면 전산화가 최종 목적임.

Business outcome

1. CAD 기초 교육 - 원활한 도면 수정 및 기타 작업을 하기 위한 목적 2. 수정 사항에 대한 피드백 발생 시 – 계약기간 동안에 도면 수정을 진행함. 3. 도면 화된 도면은 데이터 관리가 쉬우며, 보안 유지 및 훼손될 위험이 많이 줄어듬.

Conclusion

설비 위주로 관리하는 업체이며, 특히 오래된 도면 및 실물 도면 위주로 도면을 확인하는 업무 방식이 많았음, 세월이 지나고 보안사고 및 설비 사고가 자주 발생하여, 도면을 바로바로 확인해야되는 상황이 많아져 도면 전산화 해야 된다는 방침이 나오기 시작하여, 다년간 도면 전산화 프로젝트가 시작이 됨. 프로젝트를 시작할 때 실물 도면을 스캔 작업하여 스캔 파일을 AutoCAD+Rester Design을 이용하여 보다 더 정확하고 빠르게 도면화 작업을 진행 하였음. 이로 인해 보다 더 빠르게 도면을 확인 할 수 있으며, 보안 유지는 물론 도면 훼손될 위험이 현저히 줄어 듬. 업체에서 CAD만 사용하고 있지만, 추 후에 One CAD 도입을 검토 하고 있음.

Project summary

    Duration & delivery

  • 210
  • 2021-10-14

    Autodesk solutions

  • AutoCAD
  • Product Design & Manufacturing Collection

    Services provided

  • Business Transformation Consulting

    Customer industry

  • Oil & Gas
More success stories

PDMC를 이용한 Digital Prototyping 구현

기존 2D 캐드 위주의 설계 방식으로 잦은 설계 변경 및 상세 설계 시 간섭 체크의 어려움이 있음을 알고 3D를 도입하여 보다 더 효율적으로 설계를 할 수 있도록 하여 PDMC를 도입 하였습니다. 잦은 설계 변경으로 인한 설계 오류 발생 하였고, 설계 – 제작 간의 악순환으로 제작비용, 시간, Job Load 증가 하였습니다.


View

By accessing and using Partner Finder, you acknowledge and agree to the following Additional Terms as referenced in the Website Terms of Use: (i) Partner Finder may be modified, updated, interrupted, limited, suspended, or discontinued at any time without notice or liability; (ii) any query or request for information regarding a specific provider or provider services may be forwarded to that provider, however Autodesk in its discretion may retain a record to conduct business analytics to improve Partner Finder and other Autodesk products and services; (iii) Autodesk has no obligation to enforce any terms on your behalf against another user; and (iv) any feedback you provide in connection with a provider, including ratings or reviews, is a non-confidential “Submission” as defined in the Website Terms of Use. You are advised to conduct your own independent analysis and assessment of any information provided by or though Partner Finder, including whether a selected provider is appropriate for your particular circumstances. Without limiting the Website Terms of Use, Autodesk does not warrant, endorse, guarantee, or assume responsibility for any service advertised or offered by a provider through Partner Finder or any hyperlinked website or service. Autodesk is not liable for the content of this site, or for the consequences of any actions you may take based on information provided by, or through, this site. You release Autodesk and its affiliates and subsidiaries from all liability arising from your use of Partner Finder, including any hyperlinked website, service, or content.

This page has been translated for your convenience using a machine translation service. Reasonable efforts have been made to provide an accurate translation; however, no automated translation is perfect nor is it intended to replace human translators. As a result, this translation may contain errors and inaccuracies. Autodesk provides no warranties, either express or implied, about the accuracy, reliability, or completeness of the machine translation and disclaims all liability for any losses or damages caused by, or resulting from your reliance on, this translation. The English version of this website is the official version.