Back to Profile

Contact partner

Success Story

설비 워크프로세스 영상 제작

설비 워크프로세스 영상 제작

Customer challenge

저스템에서는 설계데이터를 이용하여 고객과 협의 시, 워크플로우 및 단위 설비의 작동방식에 대하여 업무 소통이 원활하지 않아 커뮤니케이션이 어려운 점이 있었습니다. 함께 작업자들의 잦은 이직으로 인하여 신규 배치되는 인원의 설비 제작을 위한 교육에 많은 시간이 소요되고 있었습니다. 

Project goals

설비 라인의 워크플로우와 설비의 작동 방식에 대하여 설명하는 영상 컨텐츠를 제작하여 커뮤니케이션 능력을 향상시키고 단위 설비의 조립 영상을 제작하여 작업자에게 배포함으로써 인력 교체 시 발생되는 교육에 소요되는 인력과 시간을 절감하는 것을 목표로 설정 하였습니다. 

Solution

저스템에서는 3D 모델링 데이터를 보유하고 있기 때문에 이를 이용하여 Autodesk VRED를 통하여 설비 라인의 워크플로우와 3가지의 핵심 설비의 구동 애니메이션을 만들어 영업으로 활용될 영상을 제작 하였습니다. 그리고 별도로 영업 영상에 포함된 3가지 핵심 설비에 대한 조립 영상을 제작하여 생산 파트에서 학습 컨텐츠로 활용될 수 있도록 하였습니다. 

Business outcome

워크플로우 영상을 활용함으로써 기존에 보유한 설계 데이터만을 이용하여 설명 했었던 것보다 고객사와의 커뮤니케이션이 원활히 진행할 수 있었고 추가적인 부연 설명을 위해 소요됐던 시간을 훨씬 감소시킬 수 있었습니다. 그리고 조립 영상을 이용하여 신규 작업자를 교육하였을 때 교육에 투입되는 인력을 약 50%가량 감소하였고 학습에 소요되는 시간도  20% 감소되는 가시적인 효과를 얻었습니다. 

Conclusion

영상 컨텐츠를 활용하여 고객과의 커뮤니케이션이 원활하게 이루어질 수 있었고 교육에 대한 학습 방식이 기존 방식과 비교하여 효율적임을 인지하여 해당 분야의 프로젝트 확대, 더 나아가 고객사 내재화까지 제안 할 수 있는 발판을 마련할 수 있게 되었습니다.

Project summary

    Duration & delivery

  • 62
  • 2021-08-23

    Autodesk solutions

  • VRED

    Services provided

  • Animation
More success stories

3D설계로 전환 및 데이터 활용

현대제철에서는 설비 유지보수를 하기 위한 설계 도면을 대략 12만장 정도 보유하고 있습니다. 그러나 대부분의 도면의 상태는 2D 도면, 특히 이미지화 된 도면으로 보유하고 있으며 3D 도면화된 상태는 대략 15% 정도에 그친 상태입니다. 그래서 도면의 수정이나 물량 산출, 설비 유지보수, 작업자간 의사소통에 불편함이 발생 되었으며 또한 반복적으로 발생되는 설비 트러블에 대한 원인 분석 시스템의 부재로 명확한 3D 설계 데이터에 근거한 제품 및 설비 보강사항이 절실한 상황이었습니다.


View

3D설계 프로그램 통합 및 협업 프로세스 구축

㈜수앤수메드는 의약품주입기 같은 전문의료기기를 자체 개발, 생산, 수출하는 회사입니다. 많은 협력 업체들간에 사용하는 3D CAD 설계 툴이 서로 달라 데이터 확인 및 수정 요청하는 등의 협업에 많은 시간 소비와 불편함을 느끼고 있었습니다. 사내에서도 기준이 되는 3D CAD 설계 툴의 부재로 인하여 의사소통에 많은 문제가 발생했습니다.


By accessing and using Partner Finder, you acknowledge and agree to the following Additional Terms as referenced in the Website Terms of Use: (i) Partner Finder may be modified, updated, interrupted, limited, suspended, or discontinued at any time without notice or liability; (ii) any query or request for information regarding a specific provider or provider services may be forwarded to that provider, however Autodesk in its discretion may retain a record to conduct business analytics to improve Partner Finder and other Autodesk products and services; (iii) Autodesk has no obligation to enforce any terms on your behalf against another user; and (iv) any feedback you provide in connection with a provider, including ratings or reviews, is a non-confidential “Submission” as defined in the Website Terms of Use. You are advised to conduct your own independent analysis and assessment of any information provided by or though Partner Finder, including whether a selected provider is appropriate for your particular circumstances. Without limiting the Website Terms of Use, Autodesk does not warrant, endorse, guarantee, or assume responsibility for any service advertised or offered by a provider through Partner Finder or any hyperlinked website or service. Autodesk is not liable for the content of this site, or for the consequences of any actions you may take based on information provided by, or through, this site. You release Autodesk and its affiliates and subsidiaries from all liability arising from your use of Partner Finder, including any hyperlinked website, service, or content.

This page has been translated for your convenience using a machine translation service. Reasonable efforts have been made to provide an accurate translation; however, no automated translation is perfect nor is it intended to replace human translators. As a result, this translation may contain errors and inaccuracies. Autodesk provides no warranties, either express or implied, about the accuracy, reliability, or completeness of the machine translation and disclaims all liability for any losses or damages caused by, or resulting from your reliance on, this translation. The English version of this website is the official version.