{"id":8968,"date":"2018-01-17T05:56:13","date_gmt":"2018-01-17T13:56:13","guid":{"rendered":"http:\/\/www.autodesk.com\/products\/fusion-360\/blog\/?p=8968"},"modified":"2018-01-17T05:56:13","modified_gmt":"2018-01-17T13:56:13","slug":"quick-tip-transparency-rendering","status":"publish","type":"post","link":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/quick-tip-transparency-rendering\/","title":{"rendered":"QUICK TIP: Transparency in Rendering"},"content":{"rendered":"

You might recognize the speaker below if you had the chance to attend AU 2017…<\/p>\n

 <\/p>\n

\"\"<\/p>\n

 <\/p>\n

It was first designed in Fusion 360 and EAGLE<\/a>, before being manufactured in situ using a 2,000 square foot, fully functioning factory on the convention floor (where Fusion Production<\/a> was also put to use).<\/p>\n

 <\/p>\n

Anyway, to really appreciate the design, I wanted to make a rendering that would show off the internals, as that is where a good chunk of the design work went in. To do that, I wanted to make the enclosure transparent, which took a little finagling…such that a QUICK TIP was in order. So without further adieu, see blow:<\/p>\n

 <\/p>\n