{"id":8039,"date":"2017-06-27T09:42:56","date_gmt":"2017-06-27T16:42:56","guid":{"rendered":"http:\/\/www.autodesk.com\/products\/fusion-360\/blog\/?p=8039"},"modified":"2017-06-27T09:42:56","modified_gmt":"2017-06-27T16:42:56","slug":"quick-tip-discover-the-undiscovered","status":"publish","type":"post","link":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/quick-tip-discover-the-undiscovered\/","title":{"rendered":"QUICK TIP: Discover the Undiscovered"},"content":{"rendered":"

If you\u2019re like me, you have 3+ documents open at any given time in Fusion 360. And, up until last week, to change the active document I relied upon finding and selecting the tab from above the toolbar. This isn’t a problem when you have 2 or 3 documents open, but as that goes to 10 or 20, the [x] to close the document gets more and more likely to get accidentally selected…<\/p>\n

 <\/p>\n

\"\"<\/p>\n

 <\/p>\n

What I learned last week that will help in these cases, was that you can switch active documents with a keyboard shortcut. It you hit Ctrl (or Command) and the tilde key (~), you\u2019ll switch between those documents. This can be done with single hand, and can help you stay focused on what you’re designing, or switching to.<\/p>\n

 <\/p>\n

But wait, there’s more! When I shared this with Michael Sagan, he came back with yet another\u00a0<\/strong>amazing –but hard to discover– shortcut. No teaser on that one; to see what that is, you’re just gonna have to watch the QUICK TIP:<\/p>\n

 <\/p>\n

\n