{"id":69558,"date":"2021-01-13T21:14:41","date_gmt":"2021-01-13T20:14:41","guid":{"rendered":"https:\/\/blogs.autodesk.com\/advanced-manufacturing\/?p=11142"},"modified":"2024-07-11T12:56:39","modified_gmt":"2024-07-11T19:56:39","slug":"benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations","status":"publish","type":"post","link":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/","title":{"rendered":"Benefits of Automatic Finite Element Mesh Adaptivity in AM Simulations"},"content":{"rendered":"
\"\"<\/figure>\n\n\n

In finite element (FE) analysis the detail in which a geometry is discretized into nodes and elements determines the system resources and computational time required to calculate the solution. A balance must always be struck between capturing all the complexity of a component and producing simulation results in a useful timeframe. The number of elements required for a static-uniform mesh, scale roughly cubically with the finest feature to be represented. An adaptive mesher, such as the one included in Netfabb Simulation, eliminates this scaling factor by using fine elements only where necessary and updating the mesh with each time step.  This allows simulations to be completed with significantly reduced node and element counts, minimizing the computational time.<\/p>\n\n\n

Static-uniform Finite Element Meshing<\/h2>\n\n\n

Standard voxel-based FE meshes specify a single uniform element size, which is used to represent the entirety of the geometry. Throughout the transient analysis the mesh remains static.  This type of static-uniform mesh is shown below:<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Figure 1. Static-uniform mesh with ~1.6 Million nodes & 1.5 Million elements. <\/strong><\/p>\n\n\n

Automatically Adaptive Finite Element Meshing<\/h2>\n\n\n

Adaptive meshes reduce the number of nodes in an FE mesh required to complete in simulation by combining sets of 8 small contacting elements into 1 larger element. The nodal reduction occurs over both space and time:<\/p>\n\n\n\n

    \n
  1. Adaptivity in space \u2013 the mesh density is reduced over a geometry, keeping fine elements at geometric regions which require smaller elements to represent them, and using larger elements to represent bulkier sections<\/li>\n\n\n\n
  2. Adaptivity in time \u2013 each time step the mesh is updated to combine elements where possible, so that at every simulated time step, the coarsest feasible FE mesh is used.<\/li>\n<\/ol>\n\n\n\n

    Below, is an image of a mesh for the same part, allowing for 1 level of adaptivity is shown:<\/p>\n\n\n\n

    \"\"<\/figure>\n\n\n\n

    Figure 2. Mesh using 1 level of adaptivity.<\/strong><\/p>\n\n\n\n

    This reduces the nodal count to 378 658 and the number of elements to 267 173.<\/p>\n\n\n\n

    Here is the mesh, allowing for 5 levels of adaptivity:<\/p>\n\n\n\n

    \"\"<\/figure>\n\n\n\n

    Figure 3. Mesh using 5 levels of adaptivity<\/strong><\/p>\n\n\n\n

    This further mesh density reduction has just 277 936 nodes and 150 451 elements.<\/p>\n\n\n

    Simulation Results<\/h2>\n\n\n

    Part-scale thermo-mechanical simulations are run for each of the 3 example mesh cases using the following settings:<\/p>\n\n\n\n

      \n
    • PRM File:\u00a0DMG Mori Lasertec30 Ti-6Al-4V 50 Micron<\/li>\n\n\n\n
    • Build Plate Material:\u00a0Ti-6Al-4V<\/li>\n\n\n\n
    • Build Plate Thickness: 15 mm<\/li>\n\n\n\n
    • Operating Conditions:\u00a0\u00a0Estimated heat loss<\/li>\n\n\n\n
    • Layers Per Element: 5<\/li>\n\n\n\n
    • Adaptivity Levels:\n
        \n
      • 0 (Static-Uniform Mesh)<\/li>\n\n\n\n
      • 1 (Some adaptivity)<\/li>\n\n\n\n
      • 5 (Large adaptivity)<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n\n\n\n

        Contour plots of the X-Displacement at the end of each simulation for each Mesh Adaptivity option are displayed below:<\/p>\n\n\n\n

        \"\"<\/figure>\n\n\n\n

        Figure 4. X-Displacement using a Static-uniform mesh<\/strong><\/p>\n\n\n\n

        \"\"<\/figure>\n\n\n\n

        Figure 5. X-Displacement using 1 level of Adaptivity<\/strong><\/p>\n\n\n\n

        \"\"<\/figure>\n\n\n\n

        Figure 6. X-Displacement using 5 levels of Adaptivity<\/strong><\/p>\n\n\n\n

        The results for these three cases are practically identical when compared. This shows that Mesh Adaptivity can be utilized and still maintain simulation accuracy.<\/p>\n\n\n

        Run Time Comparison<\/h2>\n\n\n

        The run times for all the meshes above, Static-Uniform, 1 level of Adaptivity, and 5 levels of Adaptivity, are shown in the following table<\/p>\n\n\n

        Mesh Method<\/td>Run time (min)<\/td>% Run time reduction over static-uniform<\/td><\/tr>
        Static-uniform<\/td>6368<\/td>Baseline<\/td><\/tr>
        1 Adaptivity Level<\/td>115<\/td>98.2%<\/td><\/tr>
        5 Adaptivity Levels<\/td>23<\/td>99.6%<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

        This illustrates the usefulness of Mesh Adaptivity, where using just 1 level of Adaptivity yields simulation time that is just 1.8% of the time required to solved with the Static-uniform mesh. Using 5 levels of adaptivity achieves further time savings, simulating the model in 0.4% of the time required by the Static-Uniform mesh.<\/p>\n\n\n

        Conclusion<\/h2>\n\n\n

        It has been shown that Mesh Adaptivity can be used to significantly reduce simulation times while also preserving model accuracy.<\/p>\n","protected":false},"excerpt":{"rendered":"

        In finite element (FE) analysis the detail in which a geometry is discretized into nodes and elements determines the system resources and computational time required to calculate the solution. A balance must always be struck between capturing all the complexity of a component and producing simulation results in a useful timeframe. The number of elements […]<\/p>\n","protected":false},"author":5304,"featured_media":69730,"menu_order":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":""},"categories":[1,497],"tags":[534,535,254,525,536,537,538,144,539,540,541,531,543],"coauthors":[],"class_list":["post-69558","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-fusion","category-advanced-manufacturing","tag-adaptive-meshing","tag-additive-manufacture","tag-additive-manufacturing","tag-additive-simulation","tag-computational-efficiency","tag-computational-time","tag-finite-element-mesh","tag-mesh","tag-multi-scale-simulation","tag-netfabb-local-simulation","tag-part-scale-simulation","tag-process-simulation","tag-simulation-time","dhig-theme--light"],"acf":[],"yoast_head":"\nBenefits of Automatic Finite Element Mesh Adaptivity in AM Simulations - Fusion Blog<\/title>\n<meta name=\"description\" content=\"This article delves into the computational advantages allowed by using Finite Element Mesh Adaptivity in Additive Manufacturing Process Simulation.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Benefits of Automatic Finite Element Mesh Adaptivity in AM Simulations - Fusion Blog\" \/>\n<meta property=\"og:description\" content=\"This article delves into the computational advantages allowed by using Finite Element Mesh Adaptivity in Additive Manufacturing Process Simulation.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/\" \/>\n<meta property=\"og:site_name\" content=\"Fusion Blog\" \/>\n<meta property=\"article:published_time\" content=\"2021-01-13T20:14:41+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2024-07-11T19:56:39+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/01\/AdaptiveMeshingCanon.png\" \/>\n\t<meta property=\"og:image:width\" content=\"694\" \/>\n\t<meta property=\"og:image:height\" content=\"880\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Michael Gouge\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Michael Gouge\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minutes\" \/>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Benefits of Automatic Finite Element Mesh Adaptivity in AM Simulations - Fusion Blog","description":"This article delves into the computational advantages allowed by using Finite Element Mesh Adaptivity in Additive Manufacturing Process Simulation.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/","og_locale":"en_US","og_type":"article","og_title":"Benefits of Automatic Finite Element Mesh Adaptivity in AM Simulations - Fusion Blog","og_description":"This article delves into the computational advantages allowed by using Finite Element Mesh Adaptivity in Additive Manufacturing Process Simulation.","og_url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/","og_site_name":"Fusion Blog","article_published_time":"2021-01-13T20:14:41+00:00","article_modified_time":"2024-07-11T19:56:39+00:00","og_image":[{"width":694,"height":880,"url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/01\/AdaptiveMeshingCanon.png","type":"image\/png"}],"author":"Michael Gouge","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Michael Gouge","Est. reading time":"5 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/#article","isPartOf":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/"},"author":{"name":"Michael Gouge","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#\/schema\/person\/b0a71f0f4cd5fa3bbf27ebc9d7e8cb7f"},"headline":"Benefits of Automatic Finite Element Mesh Adaptivity in AM Simulations","datePublished":"2021-01-13T20:14:41+00:00","dateModified":"2024-07-11T19:56:39+00:00","mainEntityOfPage":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/"},"wordCount":566,"commentCount":0,"image":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/#primaryimage"},"thumbnailUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/01\/AdaptiveMeshingCanon.png","keywords":["Adaptive Meshing","Additive Manufacture","additive manufacturing","Additive Simulation","Computational Efficiency","Computational time","Finite Element Mesh","mesh","Multi Scale Simulation","netfabb local simulation","Part Scale Simulation","Process Simulation","Simulation Time"],"articleSection":["Fusion","Advanced Manufacturing"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/","name":"Benefits of Automatic Finite Element Mesh Adaptivity in AM Simulations - Fusion Blog","isPartOf":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/#primaryimage"},"image":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/#primaryimage"},"thumbnailUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/01\/AdaptiveMeshingCanon.png","datePublished":"2021-01-13T20:14:41+00:00","dateModified":"2024-07-11T19:56:39+00:00","author":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#\/schema\/person\/b0a71f0f4cd5fa3bbf27ebc9d7e8cb7f"},"description":"This article delves into the computational advantages allowed by using Finite Element Mesh Adaptivity in Additive Manufacturing Process Simulation.","breadcrumb":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/#primaryimage","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/01\/AdaptiveMeshingCanon.png","contentUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/01\/AdaptiveMeshingCanon.png","width":694,"height":880},{"@type":"BreadcrumbList","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/benefits-of-automatic-finite-element-mesh-adaptivity-in-am-simulations\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/"},{"@type":"ListItem","position":2,"name":"Benefits of Automatic Finite Element Mesh Adaptivity in AM Simulations"}]},{"@type":"WebSite","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#website","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/","name":"Fusion Blog","description":"Product updates, tips, tutorials and community news.","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#\/schema\/person\/b0a71f0f4cd5fa3bbf27ebc9d7e8cb7f","name":"Michael Gouge","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2025\/04\/ADSK-LOGO-150x150.pngcd7bc5eed7b842e50f5e494314f29c83","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2025\/04\/ADSK-LOGO-150x150.png","contentUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2025\/04\/ADSK-LOGO-150x150.png","caption":"Michael Gouge"},"description":"Michael Gouge, Ph.D.:Michael Gouge is a Senior Research Engineer for Autodesk where he focuses on validating and improving the thermo-mechanical modeling of additive manufacturing processes. He completed a Ph.D in mechanical engineering at the Pennsylvania State University under Dr. Pan Michaleris. He is co-editor of \"Thermo-Mechanical Modeling of Additive Manufacturing\" with Dr. Michaleris. He has also received a B.A. in philosophy from Austin Peay, a B.S. in mechanical engineering from the University of Texas San Antonio, and a M.S. in mechanical engineering from Penn State.","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/author\/michaelgouge\/"}]}},"_links":{"self":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/posts\/69558","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/users\/5304"}],"replies":[{"embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/comments?post=69558"}],"version-history":[{"count":0,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/posts\/69558\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/media\/69730"}],"wp:attachment":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/media?parent=69558"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/categories?post=69558"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/tags?post=69558"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/coauthors?post=69558"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}