{"id":27887,"date":"2022-02-21T06:00:00","date_gmt":"2022-02-21T14:00:00","guid":{"rendered":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/?p=27887"},"modified":"2023-04-28T21:01:47","modified_gmt":"2023-04-29T04:01:47","slug":"how-to-use-haas-tooling-with-fusion-360","status":"publish","type":"post","link":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/how-to-use-haas-tooling-with-fusion-360\/","title":{"rendered":"How to Use Haas Tooling with Fusion 360"},"content":{"rendered":"\n

Haas Automation has a line of cutting tools, tool holders, workholding and much more that are available as digital assets in Fusion 360<\/em>. Focus on the work to be done and not the data creation yourself.<\/em><\/p>\n\n\n\n

In this article, we\u2019re going to cover how to set up a one-piece flow using Haas CNC workholding tools<\/a> and tool holders by creating a digital twin in Fusion 360<\/a>.<\/p>\n\n\n\n

One-piece flow means that for every cycle, a complete part will come out. For a part that requires two operations, you\u2019ll need to use two Haas vices side by side for Op 1 and 2. These are located in the Fusion 360 workholding library<\/a>.<\/p>\n\n\n\n

\"haas-automation-digital-twin-one-piece-flow-fusion-360\"<\/figure>\n\n\n

The Process – Haas Tooling & Fusion 360<\/h2>\n\n\n

Let’s walk through an example. To start, let’s cut Op 1 from raw bar stock. In order to keep the stock in place, in this example, we’ll use straight hard jaws and parallels. For Op 2, let\u2019s use a pair of soft jaws and cut the part profile into the jaws. This allows you to easily locate the part accurately and hold on to it securely. <\/p>\n\n\n\n

There’s a wide range of cutting tools and tool holders available from the Haas tooling website<\/a>. These tools are also available in the Fusion 360 tool library. <\/p>\n\n\n\n

To locate, all you need to do is search for the geometry you need or the product IDs you have. When you select the tool, it\u2019ll bring up the Haas suggested feeds and speeds for different cut types and materials. <\/p>\n\n\n\n

Once the vices and tools are loaded, let the machine do the work to set the offsets for you. At this point, it\u2019s also a good idea to double-check your program using machine simulation<\/a> for any collisions. <\/p>\n\n\n\n

Once Op 1 is complete, take the part out. Place it into the Op 2 vise and load a fresh piece of stock. Here’s where the one-piece flow begins. After Op 2, the part is complete. <\/p>\n\n\n\n

Now, combine setup one and two together. With an NC program, you can add all of the operations for the first and second into one NC program. You can also reorder to minimize the number of tool changes that\u2019ll occur. <\/p>\n\n\n\n

Take a look at the following video, where we\u2019ll show you how Fusion 360 makes this process easy and how Haas Automation<\/a> makes it possible.<\/p>\n\n\n

\n