{"id":27152,"date":"2021-06-30T07:37:00","date_gmt":"2021-06-30T14:37:00","guid":{"rendered":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/?p=27152"},"modified":"2024-03-25T01:46:11","modified_gmt":"2024-03-25T08:46:11","slug":"post-processor-and-machine-simulation-whats-new-june-2021-edition","status":"publish","type":"post","link":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/","title":{"rendered":"Post Processor and Machine Simulation                          What&#8217;s New &#8211; June 2021 edition"},"content":{"rendered":"\n<ol class=\"wp-block-list\"><li><strong>New Post Processors<\/strong>              <strong>       [icon name=&#8221;star&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;]<\/strong><\/li><li><strong>Improved Post Processors<\/strong>             <strong>[icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;]<\/strong><\/li><li><strong>New Machines<\/strong>                        <strong>       [icon name=&#8221;star&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;]<\/strong><\/li><li><strong>In Development     <\/strong>                        <strong>[icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;]<\/strong><\/li><li><strong>Tip &amp; Tricks<\/strong>                                    <strong>[icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;]<\/strong><\/li><\/ol>\n\n\n\n<figure class=\"wp-block-image size-large is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Autodesk-Fusion-360-1.jpg\" alt=\"\" class=\"wp-image-21725\" width=\"286\" height=\"85\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Autodesk-Fusion-360-1.jpg 304w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Autodesk-Fusion-360-1-300x90.jpg 300w\" sizes=\"auto, (max-width: 286px) 100vw, 286px\" \/><\/figure>\n\n\n<h2 class=\"wp-block-heading\" id=\"1-new-post-processors\">1. New Post Processors<\/h2>\n\n<h3 class=\"has-text-align-center wp-block-heading\" id=\"milling-post-processors\"><strong>Milling Post Processors<\/strong><\/h3>\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"160\" height=\"140\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/milling.png\" alt=\"\" class=\"wp-image-22251\"\/><\/figure>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=rs274_multi-axis\">RS-274D Sample Multi-axis<\/a><\/p>\n\n\n\n<p>Generic Multi-axis post for the RS-274D format. Most CNCs will use a format very similar to RS-274D. When making a post for a new CNC control this post will often serve as the basis.<\/p>\n\n\n<h3 class=\"has-text-align-center wp-block-heading\" id=\"additive-post-processors\"><strong>Additive Post Processors<\/strong><\/h3>\n\n\n<figure class=\"wp-block-image size-large is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/alfawise-2.jpg\" alt=\"\" class=\"wp-image-22247\" width=\"273\" height=\"87\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/alfawise-2.jpg 320w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/alfawise-2-300x96.jpg 300w\" sizes=\"auto, (max-width: 273px) 100vw, 273px\" \/><\/figure>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=alfawise\">Alfawise<\/a><\/p>\n\n\n\n<p>Post for exporting toolpath to the Alfawise range of printers in gcode format (U20, U20 One, U20 Plus, U30, U50). Code is output in millimeter only.<\/p>\n\n\n<h3 class=\"has-text-align-center wp-block-heading\" id=\"new-beta-post-processors\">New Beta post processors<\/h3>\n\n\n<p>The following are the new post processors under development, which means they are currently in the testing phase:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=kolb_studioline\">Kolb Studioline<\/a><\/li><li><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=syntec\">Syntec<\/a><\/li><\/ul>\n\n\n\n<p>If you choose to use one of these post processors, you assume all inherent risk in using it, and we ask that you proceed with caution. That being said, if you feel safe doing so and are willing to test any of them and provide feedback, let us know at cam.posts@autodesk.com.<\/p>\n\n\n<h2 class=\"wp-block-heading\" id=\"2-improved-post-processors\">2. Improved Post processors<\/h2>\n\n\n<p>We are always working to keep post processors up to date with new technologies. This is a summary of the main implementations made to post processors already in the library.<\/p>\n\n\n<h3 class=\"has-text-align-center wp-block-heading\" id=\"documentation\">Documentation<\/h3>\n\n\n<p>Updated the <a href=\"https:\/\/cam.autodesk.com\/posts\/posts\/guides\/Post%20Processor%20Training%20Guide.pdf\">Post Processor Training Guide<\/a> to reflect the new method for defining multi-axis configurations in a post processor.<\/p>\n\n\n\n<p>Added a <a href=\"https:\/\/cam.autodesk.com\/posts\/posts\/guides\/Hurco_autodesk.pdf\">User Guide<\/a> to the property settings in the Hurco milling post processor:<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"562\" height=\"148\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Hurco-Guide.jpg\" alt=\"\" class=\"wp-image-22259\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Hurco-Guide.jpg 562w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Hurco-Guide-300x79.jpg 300w\" sizes=\"auto, (max-width: 562px) 100vw, 562px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"649\" height=\"694\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Hurco-Guide-Cover.jpg\" alt=\"\" class=\"wp-image-22263\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Hurco-Guide-Cover.jpg 649w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Hurco-Guide-Cover-281x300.jpg 281w\" sizes=\"auto, (max-width: 649px) 100vw, 649px\" \/><\/figure>\n\n\n<h3 class=\"has-text-align-center wp-block-heading\" id=\"milling-post-processors-2\"><strong>Milling Post Processors<\/strong><\/h3>\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"628\" height=\"156\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/milling-1.jpg\" alt=\"\" class=\"wp-image-22267\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/milling-1.jpg 628w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/milling-1-300x75.jpg 300w\" sizes=\"auto, (max-width: 628px) 100vw, 628px\" \/><\/figure>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas\">Haas<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_ec\">Haas ec<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_with_a-axis\">Haas with a-axis<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_inspect_surface\">Haas inspect surface<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_trunnion\">Haas trunnion<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_umc-750\">Haas umc-750<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_next_generation\">Haas next generation<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_next_generation_inspect_surface\">Haas next generation inspect surface<\/a><\/p>\n\n\n\n<p>Modified highFeedrate handling to use the previous behavior in all these Haas post processors.<\/p>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_trunnion\">Haas trunnion<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_umc-750\">Haas umc-750<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_next_generation\">Haas next generation<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=haas_next_generation_inspect_surface\">Haas next generation inspect surface<\/a><\/p>\n\n\n\n<p>Fixed an issue where the Haas control would error when trying to activate TCPC (G234).<\/p>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=heidenhain\">Heidenhain<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=heidenhain_inspection\">Heidenhain inspection<\/a><\/p>\n\n\n\n<p>Added machine simulation and machine configuration support to the Heidenhain post processor.<\/p>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=makino_d200z\">Makino d200z<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=makino_d300\">Makino d300<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=makino_d500\">Makino d500<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=makino_slim3n\">Makino slim3n<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=mazak\">Mazak<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=okuma\">Okuma<\/a><\/p>\n\n\n\n<p>Fixed smoothing logic to use correct parameter definition in several generic post processors.<\/p>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=mazak\">Mazak<\/a><\/p>\n\n\n\n<p>Added machine simulation and machine configuration support to Mazak post processor.<\/p>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=okuma\">Okuma<\/a><\/p>\n\n\n\n<p>Add safe tool change and correct the smoothing tolerance output in G131 function.<\/p>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=tormach\">Tormach<\/a><\/p>\n\n\n\n<p>Added machine simulation and machine configuration support to Tormach post processor.<\/p>\n\n\n<h3 class=\"has-text-align-center wp-block-heading\" id=\"millturn-post-processors\"><strong>Mill-Turn Post Processors<\/strong><\/h3>\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"283\" height=\"69\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/takisawa-1.jpg\" alt=\"\" class=\"wp-image-22283\"\/><\/figure>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=takisawa_mill-turn_fanuc\">Takisawa mill-turn fanuc<\/a><\/p>\n\n\n\n<p>Synced secondary spindle to main spindle during milling processes in Takisawa mill-turn fanuc post processor.<\/p>\n\n\n<h3 class=\"has-text-align-center wp-block-heading\" id=\"additive-post-processors-2\"><strong>Additive Post Processors<\/strong><\/h3>\n\n\n<figure class=\"wp-block-image size-large is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/ultimaker-3_thumbnail.jpg\" alt=\"\" class=\"wp-image-22287\" width=\"263\" height=\"65\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/ultimaker-3_thumbnail.jpg 320w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/ultimaker-3_thumbnail-300x74.jpg 300w\" sizes=\"auto, (max-width: 263px) 100vw, 263px\" \/><\/figure>\n\n\n\n<p><a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=ultimaker_3\">Ultimaker3<\/a>, <a href=\"https:\/\/cam.autodesk.com\/hsmposts?p=ultimaker_s5\">Ultimaker S5<\/a><\/p>\n\n\n\n<p>Adding a property for selecting the nozzle name in these Ultimaker post processors.<\/p>\n\n\n<h2 class=\"wp-block-heading\" id=\"3-new-machines\">3. New Machines<\/h2>\n\n<h3 class=\"has-text-align-center wp-block-heading\" id=\"machine-library\"><strong>Machine Library<\/strong><\/h3>\n\n\n<p>The Machine Library lets you manage your machine tools by using Machine Configurations to define your available machines and resources. These configurations can automate the settings in your Job Setup.<br>There are many Machine Configurations available in the <a href=\"https:\/\/cam.autodesk.com\/machineslist\">standard library<\/a>.<\/p>\n\n\n\n<p>In the library you will find the following new Autodesk generic simulation files for nutating milling machines kinematics:<\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Autodesk-Machines-1.png\" alt=\"\" class=\"wp-image-22303\" width=\"273\" height=\"129\"\/><\/figure>\n\n\n\n<p>In addition, you will have available configuration file for these Pinnacle machines:<\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/pinnacle-1.jpg\" alt=\"\" class=\"wp-image-22307\" width=\"130\" height=\"49\"\/><\/figure>\n\n\n\n<p>The easiest way to get started, is to copy an existing configuration that matches some of the characteristics of your machine.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/machine-sim.jpg\" alt=\"\" class=\"wp-image-22291\" width=\"786\" height=\"590\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/machine-sim.jpg 998w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/machine-sim-300x225.jpg 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/machine-sim-768x576.jpg 768w\" sizes=\"auto, (max-width: 786px) 100vw, 786px\" \/><\/figure>\n\n\n<h2 class=\"wp-block-heading\" id=\"4-in-development\">4. In Development<\/h2>\n\n\n<p class=\"has-text-align-left\">You may have noticed that we already added support for machine configuration and machine simulation support to a few post processors.<br>We have now started work to update the entire library (consisting of around 220 milling post processors) which allows you to use all our post processors for machine simulation without the need for any adjustments to make use of this new feature.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"802\" height=\"582\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/machine-conf.jpg\" alt=\"\" class=\"wp-image-22295\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/machine-conf.jpg 802w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/machine-conf-300x218.jpg 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/machine-conf-768x557.jpg 768w\" sizes=\"auto, (max-width: 802px) 100vw, 802px\" \/><\/figure>\n\n\n\n<p class=\"has-text-align-left\">If you would like to add this functionality into your existing post processor, please refer to this <a href=\"http:\/\/knowledge.autodesk.com\/community\/article\/355631\">AKN article<\/a>.<\/p>\n\n\n<h2 class=\"wp-block-heading\" id=\"5-tip-amp-tricks\">5. Tip &amp; Tricks<\/h2>\n\n\n<p class=\"has-text-align-left\">If you are interested to know which post engine version you are using, you must process any of your toolpaths using the Autodesk Dumper postprocessor:<\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Dumper.jpg\" alt=\"\" class=\"wp-image-22299\" width=\"769\" height=\"433\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Dumper.jpg 1013w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Dumper-300x169.jpg 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Dumper-768x433.jpg 768w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Dumper-284x160.jpg 284w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Dumper-382x216.jpg 382w\" sizes=\"auto, (max-width: 769px) 100vw, 769px\" \/><\/figure>\n\n\n\n<p class=\"has-text-align-left\">This post processor is designed to output the primary information, as the Post Engine Version:<\/p>\n\n\n\n<figure class=\"wp-block-image size-large is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Post-Engine-Version.jpg\" alt=\"\" class=\"wp-image-22311\" width=\"457\" height=\"134\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Post-Engine-Version.jpg 446w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/06\/Post-Engine-Version-300x89.jpg 300w\" sizes=\"auto, (max-width: 457px) 100vw, 457px\" \/><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>New Post Processors [icon name=&#8221;star&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] Improved Post Processors [icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] New Machines [icon name=&#8221;star&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] In Development [icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] Tip &amp; Tricks [icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] 1. New Post Processors Milling Post Processors RS-274D Sample Multi-axis Generic Multi-axis post for the RS-274D format. Most CNCs will use a [&hellip;]<\/p>\n","protected":false},"author":4663,"featured_media":0,"menu_order":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":""},"categories":[1,7],"tags":[],"coauthors":[],"class_list":["post-27152","post","type-post","status-publish","format-standard","hentry","category-fusion","category-whatsnew","dhig-theme--light"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.3 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Post Processor and Machine Simulation             What&#039;s New - June 2021 edition - Fusion Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Post Processor and Machine Simulation             What&#039;s New - June 2021 edition - Fusion Blog\" \/>\n<meta property=\"og:description\" content=\"New Post Processors [icon name=&#8221;star&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] Improved Post Processors [icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] New Machines [icon name=&#8221;star&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] In Development [icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] Tip &amp; Tricks [icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] 1. New Post Processors Milling Post Processors RS-274D Sample Multi-axis Generic Multi-axis post for the RS-274D format. Most CNCs will use a [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/\" \/>\n<meta property=\"og:site_name\" content=\"Fusion Blog\" \/>\n<meta property=\"article:published_time\" content=\"2021-06-30T14:37:00+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2024-03-25T08:46:11+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Autodesk-Fusion-360-1.jpg\" \/>\n<meta name=\"author\" content=\"Andrea Amilo\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Andrea Amilo\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"6 minutes\" \/>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Post Processor and Machine Simulation             What's New - June 2021 edition - Fusion Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/","og_locale":"en_US","og_type":"article","og_title":"Post Processor and Machine Simulation             What's New - June 2021 edition - Fusion Blog","og_description":"New Post Processors [icon name=&#8221;star&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] Improved Post Processors [icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] New Machines [icon name=&#8221;star&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] In Development [icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] Tip &amp; Tricks [icon name=&#8221;thumbs-up&#8221; class=&#8221;&#8221; unprefixed_class=&#8221;&#8221;] 1. New Post Processors Milling Post Processors RS-274D Sample Multi-axis Generic Multi-axis post for the RS-274D format. Most CNCs will use a [&hellip;]","og_url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/","og_site_name":"Fusion Blog","article_published_time":"2021-06-30T14:37:00+00:00","article_modified_time":"2024-03-25T08:46:11+00:00","og_image":[{"url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Autodesk-Fusion-360-1.jpg","type":"","width":"","height":""}],"author":"Andrea Amilo","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Andrea Amilo","Est. reading time":"6 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/#article","isPartOf":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/"},"author":{"name":"Andrea Amilo","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#\/schema\/person\/7e10e98d987337f88eb76583a6ee0ab4"},"headline":"Post Processor and Machine Simulation What&#8217;s New &#8211; June 2021 edition","datePublished":"2021-06-30T14:37:00+00:00","dateModified":"2024-03-25T08:46:11+00:00","mainEntityOfPage":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/"},"wordCount":680,"commentCount":0,"image":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/#primaryimage"},"thumbnailUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Autodesk-Fusion-360-1.jpg","articleSection":["Fusion","What's New"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/","name":"Post Processor and Machine Simulation What's New - June 2021 edition - Fusion Blog","isPartOf":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/#primaryimage"},"image":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/#primaryimage"},"thumbnailUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Autodesk-Fusion-360-1.jpg","datePublished":"2021-06-30T14:37:00+00:00","dateModified":"2024-03-25T08:46:11+00:00","author":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#\/schema\/person\/7e10e98d987337f88eb76583a6ee0ab4"},"breadcrumb":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/#primaryimage","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Autodesk-Fusion-360-1.jpg","contentUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Autodesk-Fusion-360-1.jpg","width":304,"height":90},{"@type":"BreadcrumbList","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/post-processor-and-machine-simulation-whats-new-june-2021-edition\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/"},{"@type":"ListItem","position":2,"name":"Post Processor and Machine Simulation What&#8217;s New &#8211; June 2021 edition"}]},{"@type":"WebSite","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#website","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/","name":"Fusion Blog","description":"Product updates, tips, tutorials and community news.","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#\/schema\/person\/7e10e98d987337f88eb76583a6ee0ab4","name":"Andrea Amilo","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Andrea-Amilo-150x150.jpg14a530a7dbdc4b039e8459b20301b4b1","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Andrea-Amilo-150x150.jpg","contentUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2021\/05\/Andrea-Amilo-150x150.jpg","caption":"Andrea Amilo"},"description":"Associate Manager, Technical Consultants, Fusion 360 Post Processor developer.","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/author\/andrea-amilo\/"}]}},"_links":{"self":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/posts\/27152","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/users\/4663"}],"replies":[{"embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/comments?post=27152"}],"version-history":[{"count":0,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/posts\/27152\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/media?parent=27152"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/categories?post=27152"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/tags?post=27152"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/coauthors?post=27152"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}