{"id":15796,"date":"2020-10-19T12:00:00","date_gmt":"2020-10-19T19:00:00","guid":{"rendered":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/?p=15796"},"modified":"2021-06-18T10:44:59","modified_gmt":"2021-06-18T17:44:59","slug":"october-2020-product-update-whats-new-2","status":"publish","type":"post","link":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/","title":{"rendered":"October 2020 Product Update \u2013 What\u2019s New"},"content":{"rendered":"\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1280\" height=\"400\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner.png\" alt=\"fusion-360-whats-new\" class=\"wp-image-12960\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner.png 1280w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner-300x94.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner-1024x320.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner-768x240.png 768w\" sizes=\"auto, (max-width: 1280px) 100vw, 1280px\" \/><\/figure>\n\n\n\n<p>V.2.0.9305<\/p>\n\n\n\n<p><strong>Modeling&nbsp;<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Some of you reported that the Measure tool did not show distance&nbsp;when you tried to measure a face to an origin plane. Sorry about this glitch; this has been fixed.&nbsp;&nbsp;<\/li><\/ul>\n\n\n\n<p><strong>Electronics&nbsp;<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"https:\/\/forums.autodesk.com\/t5\/user\/viewprofilepage\/user-id\/4719036\">carl.j.barker<\/a>&nbsp;was working on his P3D&nbsp;CB when he encountered an issue where Fusion 360&nbsp;<a href=\"https:\/\/forums.autodesk.com\/t5\/fusion-360-electronics\/failed-to-get-3d-model-from-library\/td-p\/9805843\">failed to get the 3D package<\/a>&nbsp;for&nbsp;IC_Logic&nbsp;&gt; 74*32 &gt; 74LS32N.&nbsp;Now the packages are retrieved without a hitch.&nbsp;&nbsp;<\/li><\/ul>\n\n\n\n<p><strong>Manufacture&nbsp;<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"https:\/\/forums.autodesk.com\/t5\/user\/viewprofilepage\/user-id\/8699817\">eburke197<\/a>&nbsp;reported to us that after having imported the Harvey tool catalog to his tool library&nbsp;and copied\/pasted the tool he&nbsp;need&nbsp;into his milling library, he ran into a&nbsp;<a href=\"https:\/\/forums.autodesk.com\/t5\/fusion-360-manufacture\/quot-failed-to-select-tool-for-operation-quot-error-help\/m-p\/9769467\/highlight\/false\">\u201cfailed to select tool operation\u201d<\/a>&nbsp;error when he wanted to use the tool in&nbsp;a&nbsp;operation.&nbsp;We found some wonkiness under the hood and sorted it out. Now it should work flawlessly.&nbsp;&nbsp;<\/li><li>We fixed a selection issue where Sketch entities, among other things, became selectable when defining a WCS Orientation in a Setup, even though&nbsp;the Sketch parent folder and child entities have been explicitly turned off.&nbsp;&nbsp;<\/li><\/ul>\n\n\n\n<p><strong>Additive&nbsp;<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Rapid moves are now available again for&nbsp;<a href=\"https:\/\/forums.autodesk.com\/t5\/fusion-360-manufacture\/additive-removing-rapids-significantly-affects-print-quality-for\/m-p\/9809654\/highlight\/true#M89982\">additive strategies<\/a>&nbsp;and 3D prints to ensure that the print quality is optimized.&nbsp;&nbsp;<\/li><\/ul>\n\n\n\n<p><strong>API&nbsp;<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"https:\/\/forums.autodesk.com\/t5\/user\/viewprofilepage\/user-id\/3042732\">pludikar<\/a>&nbsp;told us about an issue with our API and where if the&nbsp;<a href=\"https:\/\/forums.autodesk.com\/t5\/fusion-360-api-and-scripts\/event-handlers-not-being-released\/td-p\/9796828\">event handler<\/a>&nbsp;references get leaked, they can adversely still have \u201cold code\u201d handlers registered and handling events. This required them to restart Fusion 360 to clear them, which can be annoying and cumbersome. Now, all old event handlers owned by a script will be removed automatically when that script is stopped.&nbsp;<\/li><\/ul>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n\n<p>V2.0.9144<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>We fixed a bug that was&nbsp;preventing the&nbsp;post security prompt dialog&nbsp;from&nbsp;being shown at the right time. We crushed this bug and now it\u2019s back in business.&nbsp;&nbsp;<\/li><li>There was a weird issue that was causing Fusion 360 to become unstable when you tried to Save As. We looked under the hood and tightened a few bolts; now it should run smoother.&nbsp;&nbsp;<\/li><li>Some of you were also experience instability when you tried to open some of your designs. We found that refreshing the data panel sometimes triggered a&nbsp;weird&nbsp;occurrence&nbsp;in the code, so we cleaned that up as well.&nbsp;&nbsp;<\/li><\/ul>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n\n<p>V.2.0.9142<\/p>\n\n\n\n<p>This product update brings you the following feature highlights:<\/p>\n\n\n\n<p><strong>&nbsp;<\/strong>Revamped Sketch &gt; Text with Text on Path in Sketching<\/p>\n\n\n\n<p><strong>&nbsp;<\/strong>Custom Footprint Pads in Electronics<\/p>\n\n\n\n<p><strong>&nbsp;<\/strong>Recommended and Favorite outcome iterations in Generative Design<\/p>\n\n\n\n<p><strong>&nbsp;<\/strong>Remote Constraints and Moment in Simulation<\/p>\n\n\n\n<p><strong>&nbsp;<\/strong>All-level Parts Lists, Hole &amp; Thread Notes in Drawings<\/p>\n\n\n\n<p><strong>&nbsp;<\/strong>Manufacturing Model, Grooving Tools in Profile Finishing in Manufacture<\/p>\n\n\n\n<p>Table of Contents&nbsp;[<a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new\/#\">hide<\/a>]<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new\/#Usability\">Usability<\/a><\/li><li><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new\/#Sketching_Modeling\">Sketching &amp; Modeling&nbsp;<\/a><\/li><li><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new\/#Electronics\">Electronics<\/a><\/li><li><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new\/#Generative_Design\">Generative Design&nbsp;<\/a><\/li><li><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new\/#Simulation\">Simulation&nbsp;<\/a><\/li><li><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new\/#Drawing\">Drawing&nbsp;&nbsp;<\/a><\/li><li><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new\/#Manufacture\">Manufacture&nbsp;<\/a><\/li><li><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new\/#Additive\">Additive&nbsp;<\/a><\/li><\/ul>\n\n\n<h1 class=\"wp-block-heading\" id=\"usability\"><strong>Usability<\/strong><\/h1>\n\n\n<p><strong>&nbsp;New!&nbsp;Access to design version history from the browser&nbsp;<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1274\" height=\"718\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/image001-1-1.png\" alt=\"\" class=\"wp-image-14741\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/image001-1-1.png 1274w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/image001-1-1-300x169.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/image001-1-1-1024x577.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/image001-1-1-768x433.png 768w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/image001-1-1-284x160.png 284w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/image001-1-1-382x216.png 382w\" sizes=\"auto, (max-width: 1274px) 100vw, 1274px\" \/><\/figure>\n\n\n\n<p>You now have the ability to access your design version history right from the component in the browser. It currently supports both the root component and inserted components. This is the first of many changes you will see coming to Fusion 360 that bridge the gap between desktop software and this&nbsp;<a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/cloud-collaboration-tips-for-remote-machinists-and-engineers\/\">cloud-based<\/a>&nbsp;data environment.<\/p>\n\n\n\n<p><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/new-history-experience-available-fusion-360\/\" target=\"_blank\" rel=\"noreferrer noopener\">Learn more about the new version history experience<\/a><\/p>\n\n\n\n<p><strong>Improved!&nbsp;<\/strong><strong>Saving changes and Milestones<\/strong><strong>&nbsp;at the part level<\/strong><\/p>\n\n\n\n<p>Previously in Edit-in-Place&nbsp;workflows, if you tried to save the changes you made to an assembly with externally referenced parts&nbsp;and marked the changes as a milestone, the milestone was only captured on the assembly design, and not the referenced part.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1128\" height=\"586\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.43.11-AM.png\" alt=\"\" class=\"wp-image-14607\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.43.11-AM.png 1128w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.43.11-AM-300x156.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.43.11-AM-1024x532.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.43.11-AM-768x399.png 768w\" sizes=\"auto, (max-width: 1128px) 100vw, 1128px\" \/><\/figure>\n\n\n\n<p>We\u2019ve expanded the Save capability to now include more granular options for you to capture milestones, on the assembly as well as the part level.&nbsp;&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1386\" height=\"644\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.45.08-AM.png\" alt=\"\" class=\"wp-image-14608\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.45.08-AM.png 1386w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.45.08-AM-300x139.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.45.08-AM-1024x476.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.45.08-AM-768x357.png 768w\" sizes=\"auto, (max-width: 1386px) 100vw, 1386px\" \/><\/figure>\n\n\n\n<p><strong>Improved!<\/strong>&nbsp;<strong>Undo now undoes document state&nbsp;&nbsp;<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"764\" height=\"252\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.48.03-AM.png\" alt=\"\" class=\"wp-image-14609\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.48.03-AM.png 764w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-11.48.03-AM-300x99.png 300w\" sizes=\"auto, (max-width: 764px) 100vw, 764px\" \/><\/figure>\n\n\n\n<p>When you make changes to a saved document, you\u2019ll notice that an asterisk (*) will appear next to the document name in the document tab. This is to show that there are unsaved changes in the document. Apparently if you clicked on the&nbsp;Undo button, it undid the action but didn\u2019t undo the \u201cdirtied\u201d document state. We fixed this behavior so that when you undo, it undoes the action as well as the document state, back to how it was before you made the change, reflecting this by removing the * from the document name in the document tab.&nbsp;<\/p>\n\n\n\n<p><strong>Improved!<\/strong>&nbsp;<strong>Changing workspaces and going into Edit-in-Place no longer dirties document<\/strong>&nbsp;<\/p>\n\n\n\n<p>Speaking of dirtying documents, apparently going in and out of Edit-in-Place without&nbsp;actually doing&nbsp;anything added an asterisk to your document, effectively dirtying the design. Switching workspaces from Design to something else also dirtied&nbsp;the design. We\u2019ve tweaked the behavior so that now when you go in and out of Edit-in-Place without any actual modeling or switch to another workspace, the design remains un-dirtied.&nbsp;&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=ASM-EDIT-IN-PLACE\">See help documentation for Edit In Place<\/a><\/p>\n\n\n\n<p><strong>Improved!<\/strong>&nbsp;<strong>Zebra, Curvature Map, &amp; Curvature Comb&nbsp;<\/strong><strong>Analysis usabilit<\/strong><strong>y&nbsp;<\/strong>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1444\" height=\"478\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-2.47.26-PM.png\" alt=\"\" class=\"wp-image-14613\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-2.47.26-PM.png 1444w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-2.47.26-PM-300x99.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-2.47.26-PM-1024x339.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-2.47.26-PM-768x254.png 768w\" sizes=\"auto, (max-width: 1444px) 100vw, 1444px\" \/><\/figure>\n\n\n\n<p>Previously when you used the Zebra, Curvature Map or&nbsp;Curvature Comp Analysis on your designs, discoverability of various options&nbsp;was not obvious. Placement of the sliders was also sub-optimal, so we decided to improve it. Now the options in these analysis types appear as buttons, no longer hidden under drop-down menus.&nbsp;Clumsy incremental step arrows are gone, and placement of the sliders are also in-line with their respective options, making the overall usability of the dialogs much more intuitive.<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=SLD-INSPECT-TOOLS\" target=\"_blank\" rel=\"noreferrer noopener\">See help documentation for design analysis tools<\/a>Notable Fixes<\/p>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n<h1 class=\"wp-block-heading\" id=\"sketching-amp-modelingnbsp\"><strong>Sketching &amp; Modeling <\/strong><\/h1>\n\n\n<p><strong>&nbsp;New!&nbsp;Sketch Text along path&nbsp;<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Design Workspace &gt; Create Sketch &gt; Text &gt; Text on Path Type<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"987\" height=\"450\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/TextOnAPath.png\" alt=\"\" class=\"wp-image-14614\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/TextOnAPath.png 987w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/TextOnAPath-300x137.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/TextOnAPath-768x350.png 768w\" sizes=\"auto, (max-width: 987px) 100vw, 987px\" \/><\/figure>\n\n\n\n<p>We are excited to announce improvements to Fusion 360 sketch text. The team has been under the hood working hard on improving general text capabilities with the aim to provide a more modern text experience and lay the foundation for improvements as we move forward.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1462\" height=\"794\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.18.52-PM.png\" alt=\"\" class=\"wp-image-14615\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.18.52-PM.png 1462w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.18.52-PM-300x163.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.18.52-PM-1024x556.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.18.52-PM-768x417.png 768w\" sizes=\"auto, (max-width: 1462px) 100vw, 1462px\" \/><\/figure>\n\n\n\n<p>As you can see from the screenshot, the options in the command are all self-explanatory.&nbsp;Check out Kevin Kennedy\u2019s fresh new tutorial and see the command in action. Give it a try, show off what you\u2019ve done with it, and let us know what you think!<\/p>\n\n\n\n<figure class=\"wp-block-embed-youtube wp-block-embed is-type-rich is-provider-embed-handler\"><div class=\"wp-block-embed__wrapper\">\nhttps:\/\/youtube.com\/watch?v=P5R88LG_6x8%3Ffeature%3Doembed%26enablejsapi%3D1%26origin%3Dhttps%3A\n<\/div><\/figure>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=SKT-SKETCH-CREATE-TEXT\" target=\"_blank\" rel=\"noreferrer noopener\">See help documentation for Sketch &gt; Text<\/a><\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;<\/strong><strong>Arrange* and&nbsp;<\/strong><strong>Simplify<\/strong><strong>&nbsp;tools<\/strong><strong>&nbsp;<\/strong><strong>can be accessed from the<\/strong><strong>&nbsp;Design workspace&nbsp;<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Preferences &gt; General &gt; Design &gt; Enable Arrange and Simplify tools<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1446\" height=\"568\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.25.53-PM.png\" alt=\"\" class=\"wp-image-14617\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.25.53-PM.png 1446w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.25.53-PM-300x118.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.25.53-PM-1024x402.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.25.53-PM-768x302.png 768w\" sizes=\"auto, (max-width: 1446px) 100vw, 1446px\" \/><\/figure>\n\n\n\n<p>You now have the option to turn&nbsp;on&nbsp;Arrange and Simplify tools in the Design workspace by going to the General &gt; Design section of your preferences and checking the \u201cEnable Arrange and Simplify tools\u201d box. Once applied, you\u2019ll&nbsp;see the Arrange and Simplify tools under the Solid Tab &gt; Modify panel drop-down menu.&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"784\" height=\"408\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.27.34-PM.png\" alt=\"\" class=\"wp-image-14618\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.27.34-PM.png 784w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.27.34-PM-300x156.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-16-at-3.27.34-PM-768x400.png 768w\" sizes=\"auto, (max-width: 784px) 100vw, 784px\" \/><\/figure>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=SIM-MODIFY-COMMANDS\" target=\"_blank\" rel=\"noreferrer noopener\">See help documentation for Simplify<\/a><\/p>\n\n\n\n<p>*&nbsp;Not seeing the Arrange tool?&nbsp;Here&#8217;s why.<\/p>\n\n\n\n<p><strong>Improved!<\/strong>&nbsp;<strong>Tangency Weight for Fillet Command&nbsp;<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Design Workspace &gt; Solid Tab &gt; Modify Panel &gt; Fillet&nbsp;<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1085\" height=\"586\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/fillet-weight.gif\" alt=\"\" class=\"wp-image-14620\"\/><\/figure>\n\n\n\n<p>We\u2019ve added a new option in the Fillet command called Tangency Weight. Changing the value of the Tangency Weight will&nbsp;alter the tangency curvature of your fillet, allowing you&nbsp;to fine-tune the geometry of your fillet.&nbsp;&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=SLD-FILLET-SOLID\">See help documentation for Fillet<\/a><\/p>\n\n\n\n<p><strong>Improved!&nbsp;Create Ruled Surfaces from sketches<\/strong><\/p>\n\n\n\n<p><em>Design Workspace &gt; Surface Tab &gt; Create &gt; Ruled<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1096\" height=\"600\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/ruled-surface-from-sketch.gif\" alt=\"\" class=\"wp-image-14655\"\/><\/figure>\n\n\n\n<p>Over this past summer, we introduced&nbsp;the Ruled Surface tool in the Surface tab.&nbsp;Since then,&nbsp;we\u2019ve&nbsp;tweaked our dedicated algorithms to be more robust, which improved the performance of creating ruled surfaces from a sketch.&nbsp;&nbsp;<\/p>\n\n\n\n<p>Notable Fixes<\/p>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n<h1 class=\"wp-block-heading\" id=\"electronics\"><strong>Electronics<\/strong><\/h1>\n\n\n<p><strong>&nbsp;New!&nbsp;Additional control of hole placement with reference<\/strong><strong>&nbsp;<\/strong><br><em>File &gt;New Electronic Design &gt;&nbsp;PCB Editor&nbsp;&gt;&nbsp;3DPCB&nbsp;<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"996\" height=\"1194\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-10.56.56-AM.png\" alt=\"\" class=\"wp-image-14656\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-10.56.56-AM.png 996w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-10.56.56-AM-250x300.png 250w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-10.56.56-AM-854x1024.png 854w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-10.56.56-AM-768x921.png 768w\" sizes=\"auto, (max-width: 996px) 100vw, 996px\" \/><\/figure>\n\n\n\n<p>Now you\u2019ll&nbsp;be able to place holes directly on the 3DPCB editor using references. Holes placed directly on the PCB will also appear on the 3DPCB timeline, allowing you to fine tune their location by parametrically referencing&nbsp;other asset edges.&nbsp;<\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;Customizing&nbsp;Footprint&nbsp;Pads<br><\/strong><em>File &gt; New&nbsp;Electronics&nbsp;Library&nbsp;&gt;&nbsp;Create&nbsp;New&nbsp;Package&nbsp;<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1444\" height=\"950\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.28.57-AM.png\" alt=\"\" class=\"wp-image-14657\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.28.57-AM.png 1444w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.28.57-AM-300x197.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.28.57-AM-1024x674.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.28.57-AM-768x505.png 768w\" sizes=\"auto, (max-width: 1444px) 100vw, 1444px\" \/><\/figure>\n\n\n\n<p>Fusion 360 library editor includes a comprehensive package calculator which will build a 3D model and component footprint in&nbsp;a single&nbsp;step.&nbsp;In the Package Generator UI dialogue, you now have the&nbsp;option to choose&nbsp;to use the IPC compliance or customize footprint parameter without compromising the 3D model details.&nbsp;There are some benefits to changing pad size such as making the&nbsp;pad&nbsp;larger for hand soldering or smaller&nbsp;due to space constraints.&nbsp;This feature is currently being supported in the&nbsp;SOIC, Chip, SOD&nbsp;and&nbsp;Molded&nbsp;Body&nbsp;templates, more will be added in future updates.&nbsp;&nbsp;<\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;Support for True Type Fonts<\/strong><strong>&nbsp;<\/strong><br><em>File &gt;&nbsp;Electronic Editor&nbsp;&gt;&nbsp;PCB Editor<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1442\" height=\"1186\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.36.57-AM.png\" alt=\"\" class=\"wp-image-14658\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.36.57-AM.png 1442w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.36.57-AM-300x247.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.36.57-AM-1024x842.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.36.57-AM-768x632.png 768w\" sizes=\"auto, (max-width: 1442px) 100vw, 1442px\" \/><\/figure>\n\n\n\n<p>In our last update, we added manufacturing export support for the native fonts available in Fusion 360 electronics editors.&nbsp;Many of you have asked for&nbsp;font support, which was only accessible by importing a Bitmap file.&nbsp;We now support all installed True Type fonts; you\u2019ll&nbsp;able to document your schematic and circuit board with different fonts that will genuinely enhance your electronic designs\u2019 aesthetics, and all true type fonts are fully supported in CAM Gerber Output.&nbsp;<\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;Create&nbsp;design copy<\/strong><strong>&nbsp;<\/strong><br><em>File &gt; New&nbsp;Electronic Editor &gt; Schematic Editor&nbsp;<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1386\" height=\"1078\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.40.13-AM.png\" alt=\"\" class=\"wp-image-14659\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.40.13-AM.png 1386w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.40.13-AM-300x233.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.40.13-AM-1024x796.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.40.13-AM-768x597.png 768w\" sizes=\"auto, (max-width: 1386px) 100vw, 1386px\" \/><\/figure>\n\n\n\n<p>After creating an electronic document, you have the option to either create a new schematic or board or reference existing ones. It\u2019s common to re-purpose existing designs and adapt them to a product&nbsp;update. Referencing existing designs to a new design may cause consistency issues to the original design if new components or connections are added. The option to&nbsp;\u201cCreate a Copy:&nbsp;has been added to the \u2018Reference to\u2019 dialog box which will protect the integrity of the original design.<\/p>\n\n\n\n<p><strong>Improved!&nbsp;Spice Model Assignment<\/strong><strong>&nbsp;<\/strong><br><em>File &gt; New&nbsp;Library Editor &gt;&nbsp;Device Editor<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1448\" height=\"940\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.46.07-AM.png\" alt=\"\" class=\"wp-image-14660\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.46.07-AM.png 1448w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.46.07-AM-300x195.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.46.07-AM-1024x665.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.46.07-AM-768x499.png 768w\" sizes=\"auto, (max-width: 1448px) 100vw, 1448px\" \/><\/figure>\n\n\n\n<p>Fusion 360 schematic editor does include a NGSPICE engine which allows you to run&nbsp;Analog, Digital and Mix Mode simulation on&nbsp;your schematic.&nbsp;You\u2019ll need to&nbsp;add a SPICE model to your component&nbsp;for this to work.&nbsp;We\u2019ve&nbsp;updated the interface to easily find the tools to add and remove SPICE models to your schematic symbols.&nbsp;Mapping of SPICE models can be performed in the library editor or directly in the schematic.<\/p>\n\n\n\n<p><strong>Improved!&nbsp;Validation input notice<\/strong><strong>&nbsp;<\/strong><br><em>File &gt;&nbsp;New&nbsp;Electronics Library&nbsp;&gt; Package&nbsp;<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1316\" height=\"776\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.47.15-AM.png\" alt=\"\" class=\"wp-image-14661\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.47.15-AM.png 1316w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.47.15-AM-300x177.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.47.15-AM-1024x604.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.47.15-AM-768x453.png 768w\" sizes=\"auto, (max-width: 1316px) 100vw, 1316px\" \/><\/figure>\n\n\n\n<p>We&nbsp;added a&nbsp;validation error message to package generator templates&nbsp;so that it shows&nbsp;detailed messaging regarding the offending parameter.<\/p>\n\n\n\n<p><strong>Improved!&nbsp;Device&nbsp;UI<\/strong><strong>&nbsp;<\/strong><br><em>File &gt; New&nbsp;Electronics&nbsp;Library &gt; Device Editor&nbsp;<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1452\" height=\"510\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.48.18-AM.png\" alt=\"\" class=\"wp-image-14662\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.48.18-AM.png 1452w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.48.18-AM-300x105.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.48.18-AM-1024x360.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.48.18-AM-768x270.png 768w\" sizes=\"auto, (max-width: 1452px) 100vw, 1452px\" \/><\/figure>\n\n\n\n<p>The new device interface provides you more details regarding the device footprint, package name, variant name and if a 3D model has been&nbsp;successfully&nbsp;assigned.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1328\" height=\"768\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.48.57-AM.png\" alt=\"\" class=\"wp-image-14663\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.48.57-AM.png 1328w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.48.57-AM-300x173.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.48.57-AM-1024x592.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-11.48.57-AM-768x444.png 768w\" sizes=\"auto, (max-width: 1328px) 100vw, 1328px\" \/><\/figure>\n\n\n\n<p>The device UI has been updated to provide more detail of which footprints can be&nbsp;used.&nbsp;<\/p>\n\n\n\n<p>Notable Fixes<\/p>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n<h1 class=\"wp-block-heading\" id=\"generative-designnbsp\"><strong>Generative Design <\/strong><\/h1>\n\n\n<p><strong>&nbsp;New!&nbsp;<\/strong><strong>Favorite outcome iterations<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Generative Design Workspace &gt; Explore<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1376\" height=\"754\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-12.06.58-PM.png\" alt=\"\" class=\"wp-image-14666\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-12.06.58-PM.png 1376w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-12.06.58-PM-300x164.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-12.06.58-PM-1024x561.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-12.06.58-PM-768x421.png 768w\" sizes=\"auto, (max-width: 1376px) 100vw, 1376px\" \/><\/figure>\n\n\n\n<p>You can now add&nbsp;Intermediate outcome iterations to Favorites and treat&nbsp;them as&nbsp;regular outcomes. Once added, favorite outcome iterations are displayed in the Explore views and can be filtered by dedicated filter. Favorites option enables&nbsp;you to&nbsp;compare&nbsp;the intermediate iteration with other outcomes. In addition, it gives you&nbsp;the possibility to analyze different iterations from the same outcome.&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=GD-FAVORITES\">See help documentation for&nbsp;Favorites<\/a>&nbsp;<\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;Iteration trend&nbsp;<\/strong><\/p>\n\n\n\n<p><em>Generative Design Workspace &gt; Explore&nbsp;<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1384\" height=\"794\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.39.25-PM.png\" alt=\"\" class=\"wp-image-14671\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.39.25-PM.png 1384w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.39.25-PM-300x172.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.39.25-PM-1024x587.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.39.25-PM-768x441.png 768w\" sizes=\"auto, (max-width: 1384px) 100vw, 1384px\" \/><\/figure>\n\n\n\n<p>We\u2019ve also expanded on the Scatter Plot View functionality to show&nbsp;Iteration trend&nbsp;of the&nbsp;optimization process of an outcome.&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=GD-ITERATION-TREND\">See help documentation for Iteration trend<\/a>&nbsp;<\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;Recommended outcomes<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Generative Design Workspace &gt; Explore<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1364\" height=\"788\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.40.25-PM.png\" alt=\"\" class=\"wp-image-14672\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.40.25-PM.png 1364w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.40.25-PM-300x173.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.40.25-PM-1024x592.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.40.25-PM-768x444.png 768w\" sizes=\"auto, (max-width: 1364px) 100vw, 1364px\" \/><\/figure>\n\n\n\n<p>The recommendation engine suggests recommended outcomes based on the specified criteria and displays the top&nbsp;4&nbsp;&nbsp;outcomes&nbsp;in Recommended outcomes pane to&nbsp;help you&nbsp;quickly find the outcomes that most satisfy requirements among all generated results. Recommendation settings pane&nbsp;also allows you&nbsp;to customize the criteria and determine how important they are.&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=GD-RECOMMENDED-OUTCOMES\">See help documentation for Recommended outcomes<\/a>&nbsp;<\/p>\n\n\n\n<p><strong>Improved<\/strong><strong>!<\/strong><strong>&nbsp;<\/strong><strong>I<\/strong><strong>teration bar<\/strong><strong>&nbsp;usability&nbsp;<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Generative Design Workspace &gt; Explore<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"558\" height=\"248\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.43.07-PM.png\" alt=\"\" class=\"wp-image-14673\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.43.07-PM.png 558w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.43.07-PM-300x133.png 300w\" sizes=\"auto, (max-width: 558px) 100vw, 558px\" \/><\/figure>\n\n\n\n<p>From now on all main characteristics of an outcome iteration such as: created design, labels, favorite and recommendation will be presented as a separate badge on the iteration bar in the Outcome View.<\/p>\n\n\n\n<p><strong>Improved!&nbsp;Additional outcome for&nbsp;2&nbsp;axis&nbsp;cutting, 3 axis milling, and 5 axis milling&nbsp;manufacturing methods&nbsp;<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1444\" height=\"670\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.45.07-PM.png\" alt=\"\" class=\"wp-image-14674\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.45.07-PM.png 1444w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.45.07-PM-300x139.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.45.07-PM-1024x475.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.45.07-PM-768x356.png 768w\" sizes=\"auto, (max-width: 1444px) 100vw, 1444px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1446\" height=\"924\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.45.33-PM.png\" alt=\"\" class=\"wp-image-14675\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.45.33-PM.png 1446w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.45.33-PM-300x192.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.45.33-PM-1024x654.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.45.33-PM-768x491.png 768w\" sizes=\"auto, (max-width: 1446px) 100vw, 1446px\" \/><\/figure>\n\n\n\n<p>Experimental Generative Solvers and Features Tech Preview provide&nbsp;two&nbsp;additional outcomes&nbsp;for 2 axis cutting manufacturing setups, as well as&nbsp;for&nbsp;each&nbsp;3 and 5 axis milling manufacturing setup.&nbsp;Symmetry&nbsp;constraint&nbsp;is supported for 3 and 5 axis milling manufacturing.&nbsp;<\/p>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n<h1 class=\"wp-block-heading\" id=\"simulationnbsp\"><strong>Simulation <\/strong><\/h1>\n\n\n<p><strong>&nbsp;New!<\/strong>&nbsp;<strong>Remote Constraints&nbsp;<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Simulation Study &gt;&nbsp;<\/em><em>Structural&nbsp;<\/em><em>Constraints &gt; Remote&nbsp;<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1920\" height=\"984\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Remote-Constraints.gif\" alt=\"\" class=\"wp-image-14678\"\/><\/figure>\n\n\n\n<p>You can now add a Remote Constraint as part of your setup definition&nbsp;for&nbsp;your Simulation Study. Pick&nbsp;the model face and then define the node location using x, y, z co-ordinates&nbsp;and fix the translational and rotational directions. The Remote Constraint boundary condition is transmitted through the line elements to the model.<\/p>\n\n\n\n<p><strong>&nbsp;New!<\/strong>&nbsp;<strong>Remote Moment<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Simulation Study &gt; Structural Loads &gt; Remote Moment<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1920\" height=\"984\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Remote-Moment.gif\" alt=\"\" class=\"wp-image-14679\"\/><\/figure>\n\n\n\n<p>In addition, you can also add Remote Moment. Pick the model face and then define the node location using x, y, z co-ordinates&nbsp;and then provide the moment value either normal direction or angle direction with reference or x, y, z vectors. The Remote&nbsp;Moment&nbsp;boundary condition is transmitted through the line elements to the model.&nbsp;<\/p>\n\n\n\n<p><strong>Improved<\/strong><strong>!<\/strong>&nbsp;<strong>Velocity Field shown in fan core region<\/strong>&nbsp;<\/p>\n\n\n\n<p>Previously&nbsp;(as shown below), the&nbsp;cooling&nbsp;fan blade&nbsp;or core&nbsp;region showed zero velocity&nbsp;when looking at results.&nbsp; This could lead to confusion on how the air was being moved by the fan.&nbsp;&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1368\" height=\"760\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.52.42-PM.png\" alt=\"\" class=\"wp-image-14676\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.52.42-PM.png 1368w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.52.42-PM-300x167.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.52.42-PM-1024x569.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.52.42-PM-768x427.png 768w\" sizes=\"auto, (max-width: 1368px) 100vw, 1368px\" \/><\/figure>\n\n\n\n<p>Now the velocity is shown in the fan core region for all results viewing.&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1354\" height=\"1196\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.53.34-PM.png\" alt=\"\" class=\"wp-image-14677\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.53.34-PM.png 1354w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.53.34-PM-300x265.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.53.34-PM-1024x905.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-1.53.34-PM-768x678.png 768w\" sizes=\"auto, (max-width: 1354px) 100vw, 1354px\" \/><\/figure>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n<h1 class=\"wp-block-heading\" id=\"drawingnbspnbsp\"><strong>Drawing<\/strong>  <\/h1>\n\n\n<p><strong>&nbsp;New!&nbsp;Create a \u2018Hierarchical\u2019 or \u2018All-Level\u2019 Parts List&nbsp;&nbsp;<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1418\" height=\"610\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.09.02-PM.png\" alt=\"\" class=\"wp-image-14680\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.09.02-PM.png 1418w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.09.02-PM-300x129.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.09.02-PM-1024x441.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.09.02-PM-768x330.png 768w\" sizes=\"auto, (max-width: 1418px) 100vw, 1418px\" \/><\/figure>\n\n\n\n<p>Up until now&nbsp;in the&nbsp;Drawings environment,&nbsp;your&nbsp;parts lists&nbsp;were restricted to top level components only,&nbsp;preventing&nbsp;you from diving into your subassembly structures. With this update,&nbsp;the Parts List command&nbsp;lets you&nbsp;choose between&nbsp;a \u2018First\u2019 or \u2018All Level\u2019 structure, with All Level parts lists&nbsp;listing&nbsp;all&nbsp;sub-assemblies and sub-components, with support for auto-ballooning, renumbering at the first or last \u2018level\u2019, and templates.<\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;Hole and Thread Notes&nbsp;&nbsp;<\/strong><\/p>\n\n\n\n<p><em>Drawings &gt; Text &gt; Hole and Thread Note&nbsp;and&nbsp;Note&nbsp;&nbsp;<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"618\" height=\"312\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.11.47-PM.png\" alt=\"\" class=\"wp-image-14682\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.11.47-PM.png 618w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.11.47-PM-300x151.png 300w\" sizes=\"auto, (max-width: 618px) 100vw, 618px\" \/><\/figure>\n\n\n\n<p>One of the most widely requested features has landed with this release!&nbsp;We\u2019re&nbsp;happy to&nbsp;inform you&nbsp;that you now have the option to create Hole&nbsp;callouts&nbsp;with the new Hole and Thread Note command.&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1406\" height=\"694\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.13.13-PM.png\" alt=\"\" class=\"wp-image-14685\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.13.13-PM.png 1406w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.13.13-PM-300x148.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.13.13-PM-1024x505.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.13.13-PM-768x379.png 768w\" sizes=\"auto, (max-width: 1406px) 100vw, 1406px\" \/><\/figure>\n\n\n\n<p>You can now&nbsp;automatically place hole notes&nbsp;for hole features belonging to a selected edge&nbsp;in accordance&nbsp;with&nbsp;ISO and ASME standards (depending on&nbsp;your drawing).&nbsp;While we don\u2019t support Thread features quite yet, we plan to get there soon&nbsp;(thus the name&nbsp;\ud83d\ude09).&nbsp;There\u2019s more to this feature than meets the&nbsp;eye&nbsp;\u2013&nbsp;<a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-drawings-roadmap-update\/\" target=\"_blank\" rel=\"noreferrer noopener\">read more about the smart Note command<\/a>&nbsp;here&nbsp;to fast\u2013track your annotation placements, hole notes included.<\/p>\n\n\n\n<p><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-drawings-roadmap-update\/\" target=\"_blank\" rel=\"noreferrer noopener\">See the drawings roadmap update<\/a><\/p>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n<h1 class=\"wp-block-heading\" id=\"manufacturenbsp\"><strong>Manufacture<\/strong> <\/h1>\n\n\n<p><strong>&nbsp;New!&nbsp;Manufacturing Models&nbsp;<\/strong><\/p>\n\n\n\n<p><em>Manufacture workspace &gt; Setup tab &gt; Create Manufacturing Model<\/em>&nbsp;<\/p>\n\n\n\n<p>Ever wanted to make manufacturing-specific model edits, without altering your original design? Manufacturing Models can help you do that.&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1394\" height=\"934\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.17.50-PM.png\" alt=\"\" class=\"wp-image-14689\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.17.50-PM.png 1394w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.17.50-PM-300x201.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.17.50-PM-1024x686.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.17.50-PM-768x515.png 768w\" sizes=\"auto, (max-width: 1394px) 100vw, 1394px\" \/><\/figure>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1390\" height=\"930\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.18.11-PM.png\" alt=\"\" class=\"wp-image-14690\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.18.11-PM.png 1390w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.18.11-PM-300x201.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.18.11-PM-1024x685.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.18.11-PM-768x514.png 768w\" sizes=\"auto, (max-width: 1390px) 100vw, 1390px\" \/><\/figure>\n\n\n\n<p>You can now create multiple Manufacturing Models in the Manufacture workspace that reference models from current document or even from external documents. You can also edit these Manufacturing Models to simplify your manufacturing operations and doing so won\u2019t affect the original Model. However, if at any point you go back to the Design workspace and make changes to the original Model, then those changes transfer across to all existing and future&nbsp;Manufacturing&nbsp;Models.&nbsp;<\/p>\n\n\n\n<p>One common example (shown above) could be creating&nbsp;near&nbsp;net&nbsp;shapes&nbsp;(NNS)&nbsp;for Additive and Subtractive workflows without altering the original Model.&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=MFG-MANUFACTURING-MODEL-EDIT\">See help documentation for Manufacturing Models \u2013 How-to?<\/a>&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=MFG-MM-MODEL-EX1\">Example 1: How to add a fixture and patch surface<\/a>&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=MFG-MM-MODEL-EX2\">Example 2: How to model stock and use de-featuring tools<\/a><\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;<\/strong><strong>Grooving Tools in Profiling<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Manufacture &gt; Turning &gt; Profile Finishing<\/em>&nbsp;<\/p>\n\n\n\n<p>One of the big advantages of&nbsp;concentrating&nbsp;our&nbsp;efforts on the&nbsp;turning algorithm was that it set us up for a more flexible environment.&nbsp;Part of&nbsp;the&nbsp;long-term&nbsp;plan&nbsp;is&nbsp;to&nbsp;allow users the ability to use any tool type in&nbsp;any type of strategy.&nbsp;&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1426\" height=\"874\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.20.50-PM.png\" alt=\"\" class=\"wp-image-14691\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.20.50-PM.png 1426w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.20.50-PM-300x184.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.20.50-PM-1024x628.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.20.50-PM-768x471.png 768w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.20.50-PM-244x151.png 244w\" sizes=\"auto, (max-width: 1426px) 100vw, 1426px\" \/><\/figure>\n\n\n\n<p>Allowing Grooving tools in Profiling strategies is the first step in that&nbsp;direction, starting with&nbsp;Profile&nbsp;Finishing and soon after we hope to roll&nbsp;out the same ability into&nbsp;Profile&nbsp;Roughing.&nbsp;This&nbsp;puts the more control into you, the users, to use these strategies without limitations.&nbsp;&nbsp;<\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;Template Library&nbsp;<\/strong><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1448\" height=\"1040\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.26.01-PM.png\" alt=\"\" class=\"wp-image-14695\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.26.01-PM.png 1448w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.26.01-PM-300x215.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.26.01-PM-1024x735.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.26.01-PM-768x552.png 768w\" sizes=\"auto, (max-width: 1448px) 100vw, 1448px\" \/><\/figure>\n\n\n\n<p>The new template library is a powerful way to store, manage, and re-use toolpath templates in Manufacturing. They are the best way for you to automate your programming. We have a fresh more blog post diving deeper into how this all works in Fusion 360, so check it out to learn more.&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/new-manufacturing-template-library\/\" target=\"_blank\" rel=\"noreferrer noopener\">Learn more about the Manufacturing Templates and the New Template Library<\/a><\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;Part Alignment&nbsp;<em>(Extension Feature)<\/em><\/strong><\/p>\n\n\n\n<p><em>Inspection &gt;&nbsp;<\/em><em>Probing<\/em><em>&nbsp;&gt;&nbsp;<\/em><em>Part Alignment<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1390\" height=\"792\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.30.29-PM.png\" alt=\"\" class=\"wp-image-14696\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.30.29-PM.png 1390w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.30.29-PM-300x171.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.30.29-PM-1024x583.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.30.29-PM-768x438.png 768w\" sizes=\"auto, (max-width: 1390px) 100vw, 1390px\" \/><\/figure>\n\n\n\n<p>Part setting probing&nbsp;for&nbsp;complex&nbsp;workpieces&nbsp;on a milling machine.&nbsp;&nbsp;Measures&nbsp;the&nbsp;stock condition of&nbsp;free-form geometry&nbsp;using&nbsp;\u2018Inspect Surface\u2019 probing and&nbsp;adjusts the position&nbsp;of&nbsp;the&nbsp;milling&nbsp;toolpaths&nbsp;to optimize&nbsp;the distribution&nbsp;of available&nbsp;stock. Typical applications are machining setups for complex shaped workpieces created by near net processes such as casting or forging. Part Alignment allows optimization for a 3, 4 or 5 axis&nbsp;setup&nbsp;depending on the capabilities of the machine.&nbsp;&nbsp;We have made&nbsp;several&nbsp;enhancements and usability improvements\u2013&nbsp;including&nbsp;the \u201cImport Inspection Results\u201d listed below- since the&nbsp;preview earlier this year.&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=MFG-PART-ALIGNMENT\" target=\"_blank\" rel=\"noreferrer noopener\">See help documentation for Part Alignment<\/a><\/p>\n\n\n\n<p><strong>Improved!&nbsp;<\/strong><strong>Angled Entry<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Manufacture&nbsp;<\/em><em>&gt;&nbsp;<\/em><em>Turning &gt; Profile Roughing &gt; Linking &gt; Angled Entry<\/em>&nbsp;<\/p>\n\n\n\n<p>It\u2019s back, we implemented Angled Entry into the New Profiling strategies! This was one of the top requested features from the old Profile strategy.&nbsp;&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1442\" height=\"1032\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.21.55-PM.png\" alt=\"\" class=\"wp-image-14693\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.21.55-PM.png 1442w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.21.55-PM-300x215.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.21.55-PM-1024x733.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.21.55-PM-768x550.png 768w\" sizes=\"auto, (max-width: 1442px) 100vw, 1442px\" \/><\/figure>\n\n\n\n<p>With the changes made for a more robust roughing algorithm&nbsp;that supports&nbsp;cornerstone functionality such as canned cycles in roughing strategies.&nbsp;learn more<\/p>\n\n\n\n<p><strong>Improved!&nbsp;Import Inspection Results&nbsp;<\/strong><\/p>\n\n\n\n<p><em>Manufacture Workspace &gt; Inspection tab &gt; Action Panel &gt; Import Inspection Results<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1454\" height=\"806\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.34.46-PM.png\" alt=\"\" class=\"wp-image-14697\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.34.46-PM.png 1454w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.34.46-PM-300x166.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.34.46-PM-1024x568.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.34.46-PM-768x426.png 768w\" sizes=\"auto, (max-width: 1454px) 100vw, 1454px\" \/><\/figure>\n\n\n\n<p>\u2018Import Inspection Results\u2019&nbsp;now&nbsp;shows&nbsp;a preview of the&nbsp;inspection&nbsp;results&nbsp;when you select the&nbsp;file containing the probed points or features. This&nbsp;helps you to&nbsp;visualize the&nbsp;results&nbsp;while defining the&nbsp;import, and&nbsp;allows you to set the \u2018Bodies for Projection\u2019&nbsp;if necessary.&nbsp; Also used in the Part Alignment process, this&nbsp;can be&nbsp;very&nbsp;useful if you&nbsp;are&nbsp;using different bodies to model&nbsp;stock and fixtures.&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=MFG-PROBE-IMPORT-RESULTS\">See help documentation for importing inspection results<\/a><\/p>\n\n\n\n<p><strong>Improved!&nbsp;Inspect Surface<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Inspection &gt; Probing &gt; Inspect Surface (Extension Feature)<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"972\" height=\"364\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.40.07-PM.png\" alt=\"\" class=\"wp-image-14698\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.40.07-PM.png 972w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.40.07-PM-300x112.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.40.07-PM-768x288.png 768w\" sizes=\"auto, (max-width: 972px) 100vw, 972px\" \/><\/figure>\n\n\n\n<p>Inspect Surface has been enhanced to&nbsp;support&nbsp;real&nbsp;time&nbsp;calculation of&nbsp;the&nbsp;Inspection Results&nbsp;on the NC controller&nbsp;as the probing commands are&nbsp;executed.&nbsp;&nbsp;Making the&nbsp;Inspect Surface&nbsp;behavior&nbsp;more&nbsp;consistent&nbsp;with \u2018Probe Geometry\u2019, we have&nbsp;also&nbsp;added an \u2018Action\u2019 tab which allows you to stop the probing sequence with a message if the Inspection Results are out of tolerance.<\/p>\n\n\n\n<p><strong>&nbsp;New&nbsp;in Preview!&nbsp;Import Macro Print Results&nbsp;<\/strong><\/p>\n\n\n\n<p><em>Inspection &gt; Action Panel &gt; Import Inspection Results&nbsp;<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1088\" height=\"550\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.42.43-PM.png\" alt=\"\" class=\"wp-image-14699\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.42.43-PM.png 1088w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.42.43-PM-300x152.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.42.43-PM-1024x518.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.42.43-PM-768x388.png 768w\" sizes=\"auto, (max-width: 1088px) 100vw, 1088px\" \/><\/figure>\n\n\n\n<p>Extending the scope of the inspection reporting, this new&nbsp;capability&nbsp;allows you to include&nbsp;circular&nbsp;\u2018Probe Geometry\u2019 features in your Fusion 360 inspection report.&nbsp;&nbsp;Now available in preview, this functionality allows you to measure&nbsp;critical&nbsp;holes&nbsp;and bosses and&nbsp;record&nbsp;the results in Fusion&nbsp;360.&nbsp;&nbsp;This capability imports&nbsp;print results&nbsp;produced&nbsp;by probing macros (such as Renishaw),&nbsp;creates a graphical&nbsp;visualization of&nbsp;the results, and allows you to&nbsp;include&nbsp;these&nbsp;features in&nbsp;an inspection report.<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?contextId=MFG-IMPORT-MACRO-RESULTS\" target=\"_blank\" rel=\"noreferrer noopener\">See help documentation for inspection results<\/a><\/p>\n\n\n\n<p><strong>&nbsp;New&nbsp;in Preview!&nbsp;Turn&nbsp;and Tilt&nbsp;Tool Orientation Controls&nbsp;<em>(Extension Feature)<\/em>&nbsp;<\/strong><\/p>\n\n\n\n<p><em>Milling<\/em><em>&nbsp;&gt;&nbsp;<\/em><em>Toolpath Strategy Form<\/em><em>&nbsp;&gt;&nbsp;<\/em><em>Geometry Tab &gt;&nbsp;<\/em><em>Tool Orientation<\/em><em>&nbsp;<\/em><em>&gt; Turn and Tilt&nbsp;<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"986\" height=\"640\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/ToolOrientation.gif\" alt=\"\" class=\"wp-image-14700\"\/><\/figure>\n\n\n\n<p>New&nbsp;Tool Orientation&nbsp;graphical&nbsp;controls,&nbsp;<strong>Turn&nbsp;<\/strong>and&nbsp;<strong>Tilt<\/strong>, have been added into the Tool Orientation section&nbsp;of the toolpath strategy form.&nbsp;These new&nbsp;controls&nbsp;enable you to&nbsp;adjust&nbsp;the Tool Orientation&nbsp;to&nbsp;the desired&nbsp;direction.&nbsp;The&nbsp;Turn and Tilt&nbsp;controls&nbsp;are very&nbsp;useful when the Tool Orientation you want cannot be defined&nbsp;by selecting&nbsp;an existing piece of geometry.&nbsp;learn more<br><br><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?guid=Fusion_CAM_how_to_set_tool_orientation_html\" target=\"_blank\" rel=\"noreferrer noopener\">See help documentation for Turn and Tilt and Align to View<\/a><\/p>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n<h1 class=\"wp-block-heading\" id=\"additivenbsp\"><strong>Additive <\/strong><\/h1>\n\n\n<p><strong>&nbsp;New!&nbsp;Technology\u2013agnostic<\/strong>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1090\" height=\"1110\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.53.25-PM.png\" alt=\"\" class=\"wp-image-14702\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.53.25-PM.png 1090w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.53.25-PM-295x300.png 295w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.53.25-PM-1006x1024.png 1006w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.53.25-PM-768x782.png 768w\" sizes=\"auto, (max-width: 1090px) 100vw, 1090px\" \/><\/figure>\n\n\n\n<p>Customized Automatic orientation&nbsp;settings&nbsp;(available&nbsp;for FFF and SLM) and Support&nbsp;Structures&nbsp;settings&nbsp;(SLM only) can be stored in&nbsp;a template library to be&nbsp;reused in&nbsp;other&nbsp;Additive Manufacturing Setups which will make&nbsp;3D&nbsp;print&nbsp;preparation&nbsp;a breeze.&nbsp;&nbsp;<\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;<\/strong><strong>Support for&nbsp;<\/strong><strong>A<\/strong><strong>nycubic<\/strong><strong>&nbsp;FFF printers<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Manufacture &gt; Additive tab &gt; Machine Library<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1452\" height=\"868\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.54.22-PM.png\" alt=\"\" class=\"wp-image-14703\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.54.22-PM.png 1452w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.54.22-PM-300x179.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.54.22-PM-1024x612.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.54.22-PM-768x459.png 768w\" sizes=\"auto, (max-width: 1452px) 100vw, 1452px\" \/><\/figure>\n\n\n\n<p>Fusion Machine library now includes&nbsp;six&nbsp;Anycubic&nbsp;3Dprinters. The post library also has a post&nbsp;associated with these printers,&nbsp;so users can setup the prints and generate g-code for their&nbsp;Anycubic&nbsp;machines.&nbsp;<\/p>\n\n\n\n<p><strong>&nbsp;New!&nbsp;Additive Build Extension<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Accessible from the Extensions icon in the top right corner<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1444\" height=\"904\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM-1.png\" alt=\"\" class=\"wp-image-14705\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM-1.png 1444w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM-1-300x188.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM-1-1024x641.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM-1-768x481.png 768w\" sizes=\"auto, (max-width: 1444px) 100vw, 1444px\" \/><\/figure>\n\n\n\n<p>We are bringing more advanced additive manufacturing technologies into Fusion 360 by&nbsp;introducing Powder Bed Metal manufacturing workflows&nbsp;into the software, now available in the Extensions&nbsp;dialog&nbsp;under&nbsp;brand-new Additive Build section.&nbsp;This manufacturing workflow will enable you to arrange\/orient parts on the platform, create fully associative support structures, slice models, and output&nbsp;native build files including laser parameters or a 3MF file.&nbsp;&nbsp;<\/p>\n\n\n\n<p><a href=\"https:\/\/help.autodesk.com\/view\/fusion360\/ENU\/?guid=GUID-B7A1FB40-2CCF-4817-9690-7AC72F1A5362\" target=\"_blank\" rel=\"noreferrer noopener\">Learn more about Additive Manufacturing<\/a>&nbsp;<\/p>\n\n\n\n<p><strong>Improved!<\/strong><strong>&nbsp;<\/strong><strong>Multi-extruder selector<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Manufacture &gt; Additive tab &gt; Print Setting Editor &gt; Extruder<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1446\" height=\"902\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM.png\" alt=\"\" class=\"wp-image-14704\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM.png 1446w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM-300x187.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM-1024x639.png 1024w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM-768x479.png 768w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.55.05-PM-244x151.png 244w\" sizes=\"auto, (max-width: 1446px) 100vw, 1446px\" \/><\/figure>\n\n\n\n<p>You can now choose which extruder to be used as your primary extruder for multi extruder FFF printers within the Basic tab of the Print Settings Editor dialog.&nbsp;<\/p>\n\n\n\n<p><strong>Improved!&nbsp;<\/strong><strong>Supports panel drop-down<\/strong><strong>&nbsp;<\/strong>&nbsp;<\/p>\n\n\n\n<p><em>Manufacture &gt; Additive tab &gt; Supports&nbsp;<\/em>&nbsp;<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"1004\" height=\"596\" src=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.58.29-PM.png\" alt=\"\" class=\"wp-image-14706\" srcset=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.58.29-PM.png 1004w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.58.29-PM-300x178.png 300w, https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/10\/Screen-Shot-2020-10-19-at-2.58.29-PM-768x456.png 768w\" sizes=\"auto, (max-width: 1004px) 100vw, 1004px\" \/><\/figure>\n\n\n\n<p>Previously, the Supports panel drop-down&nbsp;was a&nbsp;flat list of tools&nbsp;with no apparent order. We\u2019ve&nbsp;added a few dividers and&nbsp;reorganized them to better suit&nbsp;additive manufacturing&nbsp;setups with metal powder bed fusion printers.&nbsp;<\/p>\n\n\n\n<hr class=\"wp-block-separator\"\/>\n\n\n\n<p>V.2.0.9011 (previous update)<\/p>\n\n\n\n<p><strong>Usability<\/strong><\/p>\n\n\n\n<p><strong>&nbsp;Fixed:<\/strong>&nbsp;Term has Expired issue<\/p>\n\n\n\n<p>We got reports that some of you have been getting an unexpected \u201cTerm has Expired\u201d&nbsp;tag&nbsp;next to the Fusion 360 app name in the window frame.&nbsp;Apparently,&nbsp;some wires got crossed and triggered this incorrect tag. Sorry about that \u2013 this is now fixed.&nbsp;<\/p>\n\n\n\n<p><strong>Manufacture&nbsp;<\/strong><\/p>\n\n\n\n<p><strong>&nbsp;Fixed:<\/strong>&nbsp;Toolpath trimming crash and selecting Hole Faces issue<\/p>\n\n\n\n<p>We fixed an instability issue that was causing Fusion 360 to crash when you tried to edit a trimmed toolpath.&nbsp;This should also&nbsp;fix the issue around selecting Hole Faces in the Drill Operation.&nbsp;<\/p>\n\n\n\n<p><strong>&nbsp;Fixed:<\/strong>&nbsp;Long comment in GCode issue<\/p>\n\n\n\n<p><a href=\"https:\/\/forums.autodesk.com\/t5\/user\/viewprofilepage\/user-id\/6747737\" target=\"_blank\" rel=\"noreferrer noopener\">xbeerd<\/a>&nbsp;found a&nbsp;<a href=\"https:\/\/forums.autodesk.com\/t5\/fusion-360-support\/postprocessing-following-10-1-2020-update\/m-p\/9781722#M101613\" target=\"_blank\" rel=\"noreferrer noopener\">long string of comments<\/a>&nbsp;in the&nbsp;GCode&nbsp;he exported from the Manufacture workspace and consequently,&nbsp;it was not compatible with his CNC router. We found this string and&nbsp;split it into 2 sections. It should work fine now.&nbsp;<\/p>\n\n\n\n<p><strong>&nbsp;Fixed:<\/strong>&nbsp;G1 F0 drilling issue<\/p>\n\n\n\n<p><a href=\"https:\/\/forums.autodesk.com\/t5\/user\/viewprofilepage\/user-id\/8019094\" target=\"_blank\" rel=\"noreferrer noopener\">michalzywczak<\/a>&nbsp;reported that he was incorrectly getting a&nbsp;<a href=\"https:\/\/forums.autodesk.com\/t5\/fusion-360-manufacture\/bug-drill-operation\/td-p\/9779575\/highlight\/false\/page\/2\" target=\"_blank\" rel=\"noreferrer noopener\">G1 F0 (feed rate of zero)<\/a>&nbsp;at the beginning of drilling cycles. This&nbsp;would cause some machines to alarm out, or just sit there endlessly, which is not good. We got this sorted and now it shouldn\u2019t give you a G1 F0 anymore.&nbsp;&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>V.2.0.9305 Modeling&nbsp; Some of you reported that the Measure tool did not show distance&nbsp;when you tried to measure a face to an origin plane. Sorry about this glitch; this has been fixed.&nbsp;&nbsp; Electronics&nbsp; carl.j.barker&nbsp;was working on his P3D&nbsp;CB when he encountered an issue where Fusion 360&nbsp;failed to get the 3D package&nbsp;for&nbsp;IC_Logic&nbsp;&gt; 74*32 &gt; 74LS32N.&nbsp;Now the [&hellip;]<\/p>\n","protected":false},"author":208,"featured_media":12960,"menu_order":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":""},"categories":[12],"tags":[196],"coauthors":[],"class_list":["post-15796","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-whats-new","dhig-theme--light"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.4 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>October 2020 Product Update \u2013 What\u2019s New - Fusion Blog<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"October 2020 Product Update \u2013 What\u2019s New - Fusion Blog\" \/>\n<meta property=\"og:description\" content=\"V.2.0.9305 Modeling&nbsp; Some of you reported that the Measure tool did not show distance&nbsp;when you tried to measure a face to an origin plane. Sorry about this glitch; this has been fixed.&nbsp;&nbsp; Electronics&nbsp; carl.j.barker&nbsp;was working on his P3D&nbsp;CB when he encountered an issue where Fusion 360&nbsp;failed to get the 3D package&nbsp;for&nbsp;IC_Logic&nbsp;&gt; 74*32 &gt; 74LS32N.&nbsp;Now the [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/\" \/>\n<meta property=\"og:site_name\" content=\"Fusion Blog\" \/>\n<meta property=\"article:published_time\" content=\"2020-10-19T19:00:00+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-06-18T17:44:59+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/i0.wp.com\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner.png?fit=1280%2C400&ssl=1\" \/>\n\t<meta property=\"og:image:width\" content=\"1280\" \/>\n\t<meta property=\"og:image:height\" content=\"400\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Keqing Song\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@keqingsong\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Keqing Song\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"22 minutes\" \/>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"October 2020 Product Update \u2013 What\u2019s New - Fusion Blog","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/","og_locale":"en_US","og_type":"article","og_title":"October 2020 Product Update \u2013 What\u2019s New - Fusion Blog","og_description":"V.2.0.9305 Modeling&nbsp; Some of you reported that the Measure tool did not show distance&nbsp;when you tried to measure a face to an origin plane. Sorry about this glitch; this has been fixed.&nbsp;&nbsp; Electronics&nbsp; carl.j.barker&nbsp;was working on his P3D&nbsp;CB when he encountered an issue where Fusion 360&nbsp;failed to get the 3D package&nbsp;for&nbsp;IC_Logic&nbsp;&gt; 74*32 &gt; 74LS32N.&nbsp;Now the [&hellip;]","og_url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/","og_site_name":"Fusion Blog","article_published_time":"2020-10-19T19:00:00+00:00","article_modified_time":"2021-06-18T17:44:59+00:00","og_image":[{"width":1280,"height":400,"url":"https:\/\/i0.wp.com\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner.png?fit=1280%2C400&ssl=1","type":"image\/png"}],"author":"Keqing Song","twitter_card":"summary_large_image","twitter_creator":"@keqingsong","twitter_misc":{"Written by":"Keqing Song","Est. reading time":"22 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/#article","isPartOf":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/"},"author":{"name":"Keqing Song","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#\/schema\/person\/baa383317461a2e5d3a08b80f6b27642"},"headline":"October 2020 Product Update \u2013 What\u2019s New","datePublished":"2020-10-19T19:00:00+00:00","dateModified":"2021-06-18T17:44:59+00:00","mainEntityOfPage":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/"},"wordCount":4347,"commentCount":0,"image":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/#primaryimage"},"thumbnailUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner.png","keywords":["What's New"],"articleSection":["News"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/","name":"October 2020 Product Update \u2013 What\u2019s New - Fusion Blog","isPartOf":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/#primaryimage"},"image":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/#primaryimage"},"thumbnailUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner.png","datePublished":"2020-10-19T19:00:00+00:00","dateModified":"2021-06-18T17:44:59+00:00","author":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#\/schema\/person\/baa383317461a2e5d3a08b80f6b27642"},"breadcrumb":{"@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/#primaryimage","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner.png","contentUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2020\/04\/whats-new-banner.png","width":1280,"height":400,"caption":"fusion-360-whats-new"},{"@type":"BreadcrumbList","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/october-2020-product-update-whats-new-2\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/"},{"@type":"ListItem","position":2,"name":"October 2020 Product Update \u2013 What\u2019s New"}]},{"@type":"WebSite","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#website","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/","name":"Fusion Blog","description":"Product updates, tips, tutorials and community news.","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/#\/schema\/person\/baa383317461a2e5d3a08b80f6b27642","name":"Keqing Song","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2016\/08\/keqing_avatar-150x150.jpgc11268d5dd32aaa4a2f17d03367d8016","url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2016\/08\/keqing_avatar-150x150.jpg","contentUrl":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-content\/uploads\/2016\/08\/keqing_avatar-150x150.jpg","caption":"Keqing Song"},"description":"Fusion 360 Community Manager, creative innovator, music maker, design geek, analog nerd.","sameAs":["https:\/\/x.com\/keqingsong"],"url":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/author\/keqingsong\/"}]}},"_links":{"self":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/posts\/15796","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/users\/208"}],"replies":[{"embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/comments?post=15796"}],"version-history":[{"count":0,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/posts\/15796\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/media\/12960"}],"wp:attachment":[{"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/media?parent=15796"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/categories?post=15796"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/tags?post=15796"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/www.autodesk.com\/products\/fusion-360\/blog\/wp-json\/wp\/v2\/coauthors?post=15796"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}