Connect with:

It’s as Easy as Running – Understanding Voltage, Current, Resistance, and Ohm’s Law

Sam Sattel


It’s as Easy as Running – Understanding Voltage, Current, Resistance, and Ohm’s Law

Welcome back, young electronics master. In our previous blog, we learned about the humble circuit, and it’s place in our world of electronics. But to grasp the true essence of electricity, one must understand how to manipulate and measure voltage, current, and resistance. That’s where this blog comes in. We’ve climbed the highest peaks to find the right analogy to explain the nature of how electricity works in a circuit. And rather than go with yet another water analogy, we thought we’d get a little more personal, with our bodies in motion.

Voltage – It’s All About Potential

Imagine waking up in the morning. You’re laying in bed, wanting just a few more hours of sleep, but knowing that it’s time for that dreaded morning run. You know it’s good for you, and you’ll feel great once you get moving, but every morning you have to make a choice. You can either stay in bed and sleep a little bit longer or get up and start moving your body.

This is the essence of voltage; it’s all about the difference of potential. We all have potential, and when it comes to running, the potential in question is making a choice of whether to run or sleep. If you don’t decide to run this morning, then your potential will sit dormant, but if you do, then that potential will explode outward, propelling you to run for miles and energizing the rest of your day.

Voltage in Electricity

Like having the potential to move or not, voltage is stored electrical energy with the potential for movement. It’s this voltage force that motivates electrons to flow in a circuit and keeps them running hour after hour.

Voltage is all around just waiting for us to tap into its potential. Look at every unused wall outlet in your house – There is voltage buzzing in those sockets ready to do work for you. But like making a choice to run, you have a choice of whether to tap into that source of voltage in your outlet. If left alone, then the voltage remains where it is, never realizing its full potential.

In an electrical circuit, voltage is measured by finding at what’s called the potential difference between two points with a multimeter. Take a 9-volt battery, for example, if you measure the positive and negative ends, you’ll get a potential difference of 9 volts (or close to it). The positive end measures at 9V, and the negative end measures at 0V. Minus the two numbers, and you get your potential difference.


You can use a multimeter to quickly measure the voltage or potential difference in a battery. (Image source)

Voltage comes in two different forms, being DC (Direct Current) voltage, which provides a steady stream of negative electricity, or AC (Alternating Current) voltage, which switches from negative to positive continuously. Here are the symbols that you’ll want to be on the lookout for on a schematic for DC voltage, AC voltage, and battery:


Here’s some of the voltage symbols to look out for in your next schematic – batteries, DC, and AC.

The Father of Voltage – Alessandro Volta


The man of the hour, credited with discovering voltage – Alessandro Volta (Image source)

The man to first discover voltage was Italian Physicist Alessandro Volta. He also uncovered a ton of other cool things, including:

  • Discovering that if you mix methane with air that you can create an electrical spark, which marked the beginning of the now-famous combustion engine.
  • Discovering that electrical potential stored in a capacitor is proportional to its electrical charge.
  • Volta was also credited with creating the first electric battery, called the Voltaic Pile, which allowed scientists of the time to create a steady flow of electrons.

An example of a Voltaic Pile first created by Volta, enabling scientists to create a steady flow of electrons. (Image source)

Volta wasn’t without his quirks, though. Until he was four years old, he didn’t speak a word, and his parents feared that he was either mentally challenged. Good thing they were wrong!

Current – Going with the Flow

Going back to our running analogy, imagine that you’ve made the choice to take that morning run. You have your shoes and running shorts on and walk out your door to hit the trail. At this point, you’ve got some movement going as you start your run, a flow.


Here’s current in motion in our bodies, who knew that electricity could be so personal?

Maybe an hour into your run and you start to hit your stride, ready to run for miles. As you run, your smartwatch measures exactly how far you went and how fast you traveled. This process of running and measuring the process is what Current is all about.

Current in Electricity

Like taking steps to complete your morning run, current is the constant movement, or flow, of electricity in a circuit. The electric current flowing through your circuit is always measured in Amperes or Amps. But what keeps this current moving?

It’s the voltage that we talked about earlier. Just like you need to tell yourself to keep running once you get tired, voltage is the motivating force behind current that keeps it moving. There are two schools of thought for how current flows in a circuit; Conventional Flow or Electron Flow, let’s look at both:

Conventional Flow – Conventional Flow was first, in a period of scientific discovery when people didn’t understand electrons and how they flowed in a circuit. Under this model, it was assumed that electricity flows from positive to negative.


Conventional Flow with electricity flowing from the positive to the negative side of a battery.

You’ll still see this mentality being used in schematics today, and though it isn’t entirely accurate, it is a bit easier to understand than Electron Flow. After all, if we go back to our running analogy, you start with a positive source of energy, and you run until you’re out of energy. It’s positive to negative relationship like many things in life.

Electron Flow – Electron Flow was the follow up to Conventional Flow. This model accurately portrays electrons as flowing in the opposite direction, from negative to positive. Because electrons are negative by their very nature, they will always flow out of the negative and endlessly try to find their way to the positive, low voltage side of a power source.


And the more current electron flow, with electrons flowing as they do in reality, from negative to positive.

Does it matter which way you display current flowing in a circuit? Not really. You’ll likely see it presented both ways when looking at a variety of schematics. Take a look at the diodes or transistors in the next schematic you examine; they’ll all be pointing in the direction of Conventional Flow.

The Man Behind Current – Andre-Marie Ampere


Andre-Marie Ampere, the self-educated man that accomplished far more than just discovering Amperes. (Image source)

Ampere was a French Physicist and Mathematician, and also one of the founders of the science of classical electromagnetism. You can thank Ampere for some pretty great stuff, including:

  • His major discovery of demonstrating that wire carrying an electric current can either attract or repel another wire that also has a current flowing through it, without the use of physical magnets.
  • He was also the first to bring out the idea of the existence of a particle that we all widely recognize as the electron.
  • He also organized chemical elements by their properties in a periodic table a half century before today’s modern periodic table came into existence.

An interesting bit about Ampere’s education – He didn’t have any formal studies! Instead, his father let him do as he pleased, learning anything. While this might bring out laziness and excessive video game playing in the rest of us, Ampere discovered a natural love for knowledge, devouring as many books as he could from the family library and even memorizing pages from the encyclopedia.

Resistance – It’s a Material World

Our final concept – Resistance. Imagine yourself back out on the running trail, on what kind of surface are you running? If you’re lucky, then you might be cruising on a soft grass or dirt path. Or maybe you prefer the firmness of the street or sidewalk. But what if it starts pouring outside? Then you might be stuck slogging through some thick mud

Regardless of what kind of path you’re running on, your feet are encountering some resistance as you continue to move forward. Naturally, not every path of resistance is created equal. Running through mud puts way more resistance on your ability to run when compared to running on a dirt path or street. This is what resistance is all about, the tug and pull of the material world.

Resistance in Electricity

Whatever kind of material that electricity moves through, it’s going to encounter some friction that resists its motion. To put it simply, resistance slows down a current. While there are specific components in an electric circuit like a resistor whose sole job is resisting electricity, any physical material will provide some resistance.

You’ll find resistance being measured in Ohms Ω, and it has a direct relationship to current and voltage. Here’s a simple example – The more resistance you have, the less current that can flow through a circuit. It’s just like running, the thicker the mud, the slower you’re going to run. The opposite works as well, if you crank up the voltage to get your current moving faster than your resistance will have less of an effect on your circuit.

The Master of Resistance – Georg Simon Ohm


Georg Ohm – The man who united voltage, current, and resistance into the now famous Ohm’s Law. (Image source)

Mr. Ohm was a German Physicist and Mathematician, and it was during his days as a school teacher when he began his research using the new electric battery invented by Volta. With his own equipment, Ohm was able to discover that there is a direct relationship between the voltage applied to a conductor (like a copper wire) and its resulting electric current. This came to be known as the now famous Ohm’s Law that we all rely on today.

It’s interesting to note that Ohm presented his findings in his first book – The Galvanic Circuit Investigated Mathematically, but the college that he worked for at the time didn’t care for it. So what did Ohm do? He resigned, and got a new job at the Polytechnic School of Nurnberg. It was here that his work thankfully got the attention it deserved.

Putting it All Together with Ohm’s Law

Alright, it’s now time to put all of our concepts together. Here’s what we have to work with:


  • Voltage (V) – Which is stored electricity that has the potential for movement. When this potential is activated, then voltage acts as a sort of pressure, pushing current along a circuit.
  • Current (I)Which is the flow of electricity in a circuit. This can be measured directly in Amperes, and there are two schools of thought for how current flows – Conventional Flow and Electron Flow.
  • Resistance (R)Which is the resistance that electricity encounters simply by flowing through some physical material. This is measured in Ohms.

By putting all of this together, we arrive at Ohm’s Law:


In this equation, V = Voltage, I = Current, and R = Resistance. The flexibility of Ohm’s Law is impressive and can be used to find any of these three values when only two of them are known. Let’s go through an example to see how it works.

Using Ohm’s Triangle

Check out Ohm’s Triangle below. It provides an easy, visual representation of how you can manipulate Ohm’s Law to get the answers you need. To use it, all you need to do is cover up the letter of the value that you need to figure out, and the remaining letters show you how to get there.


Ohm’s Triangle, your handy tool to find exactly what variation of Ohm’s Law needs to be used.

Take a look at the circuit below. We have a 9V battery connected to a LED and a resistor. The only problem is that we need to figure out what is the value of the resistor.


Our practice circuit to get a taste of Ohm’s Law. We can use the known Amps and Volts to get our Resistor value.

To do this, let’s look at our Ohm’s Triangle. By covering up the R, we can see that we have V over I, or V divided by I. So by dividing these two numbers, we’ll get the value of our resistor. Let’s plug these numbers into this equation: R = V/I.

  • Let’s start with the most obvious, our battery voltage is 9 volts.
  • Looking at the datasheet for our LED, we can see a suggested max current of 16mA (milliamps), which converts to 0.016 amps.
  • Plugging these two numbers into our equation gets us R = 9V/0.016A, which equals 473.68. This means we need a 473 Ohms resistor for our LED to turn on!

Resistance is Futile

Understanding how voltage, current and resistance all work together wasn’t all that hard, now was it? The next time you go for a morning run, we hope you’ll have a new perspective on electricity. Feel your feet flying across the pavement or dirt, and remember that’s resistance. And when you check to see how far you ran, then you’re observing current in motion! And that force that got you out of bed and kept you running? Voltage.

Ready to make your first circuit today? Try Autodesk EAGLE for free!

Subscribe for Updates

Stay up to date with the latest news, knowledge and tutorials for Autodesk EAGLE and electronics design.


The Nest

Stay connected with the latest news, knowledge and tutorials for Autodesk EAGLE and electronics design.