15 min.

Share Civil 3D Surfaces with Revit Using BIM 360

Module overview

Sharing design models between the architect and civil engineer helps reduce rework and improves collaboration. Use BIM 360 to share surface data after setting the geospacial coordinates for the project.

This module takes approximately 15 minutes to complete. By the end of the module, you should be able to:

  • Set the geospacial coordinates in both Civil 3D and Revit to ensure the models line up
  • Share the Civil 3D surface with Revit through the cloud using BIM 360

Module downloads

These downloadable resources will be used to complete units in this module:

Module outline

  • Introduction to Setting Up Project for Geospatial Coordinate Systems (0:47 min)