20 min.

Set up cloud collaboration with Fusion Team

Module overview

The focus of this module is on setting up the Fustion Team collaboration space, installing the components, and connecting it to your CAD.

In the next 20 or so minutes, you will learn the following skills:

  • Create your cloud collaboration space in Fusion Team
  • Create a cloud collaboration project
  • Install Desktop Connector and link it with Inventor project file

Module pre-requisites

This module requires user-level knowledge of a CAD tool such as Autodesk Inventor and is focused on the cloud collaboration best practices. If you don't have experiences with this product, we recommend you to take foundational training using one of the resources below:

About the author

This module was created by Brian Schanen. Brian Schanen works for Autodesk, Inc., as a Partner Enablement and Strategy Manager for Autodesk Data Management & Collaboration software in the Business Strategy & Marketing division. He is responsible for evangelizing Autodesk PLM and Data Management software both internally and externally, ensuring customer success with the software. This includes building and delivering materials for nurturing prospects, customers, and the partner channel on Autodesk PLM and product data management (PDM) solutions. With 18 years of PDM and PLM experience, he is an Autodesk University veteran speaker. On any given day, you can find him coaching prospects, mentoring new customers, and even assisting in deployments of Autodesk software.

Before you start

  • If you have technical difficulties, please reach out to product support
  • To collaborate with other industry professionals using Fusion Teams, or if you have questions or feedback, please visit Autodesk Forums.

Module outline

  • Introduction Set up Cloud Collaboration with Fusion Team