Pre-test

Before you begin this course, test your skills by taking the following assessment to see where you stand. 

Keep track of your incorrect answers to know which skills you should study. You'll have a chance to take this same practice test again at the end of the course to see how you've improved.

Test

45 questions

Where can the Content Center file location path be specified in the project file?

(Select one)
Select an answer

Which option allows entities of a sketch to be reused for additional features?

(Select one)
Select an answer

A mechanical designer needs to create a parameter named WIDTH with a value of 145 while placing a dimension.

What would this expression look like?

(Select one)
Select an answer

Refer to exhibit.



The parameter 'Height' is selected as a Key parameter.What does this mean?

(Select one)
Select an answer

Refer to exhibit.



A mechanical designer wants to have all of the text in their Parts List in uppercase but doesn't want to override the inputs.

Where can all the text in the Parts List be capitalized at once?

(Select one)
Select an answer

Refer to exhibits.





Which single tool allows a mechanical designer to change the model in exhibit 1 to the model in exhibit 2?

(Select one)
Select an answer

Which tool is used to manually move, scale, and rotate freeform edges, faces and vertices?

(Select one)
Select an answer

A non-native Inventor file is received and is required to be added to a design with the following criteria.
  • Simple modifications are required on the file after it is added to the Inventor design.
  • Updated files to the original source file will occur and will require the simple modifications to remain valid.
What is the correct workflow?

(Select one)
Select an answer

Which tool can combine two sketches or a sketch and a face to create a 3D curve?

(Select one)
Select an answer

A mechanical designer has been provided a large assembly consisting of 10,000 components.Which option would be used to open the assembly, but not load all the components?

(Select one)
Select an answer

Which weldment tool would be used to place a chamfer to assist in weld penetration?

(Select one)
Select an answer

Refer to exhibits.





A mechanical designer imported a CAD model containing a hole pattern shown in exhibit 1.

Which tool is needed to reposition the first hole as shown in exhibit 2?

(Select one)
Select an answer

Refer to exhibit.



Simplify (Shrinkwrap) has been used on this assembly.

Which style of output has been used?

(Select one)
Select an answer

Refer to the exhibits.





A frame member was added to an assembly using a rectangular sketch as shown in exhibit 1.

Which Frame Member tool was used to treat the corners as shown in exhibit 2?

(Select one)
Select an answer

Refer to the exhibits.



A mechanical designer has designed a part requiring gold plating. Which feature is added after the gold plating based on the Model State table?

(Select one)
Select an answer

Refer to exhibit.



Which Tolerance Method allows change to both the upper and lower limit independently shown in the exhibit?

(Select one)
Select an answer

A mechanical designer has an assembly that has a previously created pattern. 

How can this pattern be duplicated to match an existing pattern? What is required for feature pattern select to work?

(Select one)
Select an answer

Which can be found in Application Options? 

(Select one)
Select an answer

Refer to exhibits.




A mechanical designer needs to create the cut shown in exhibit 2.

What solid modeling feature should be used?

(Select one)
Select an answer

When a work feature such as an axis is created in-place during the creation of another work feature, how is it displayed in the Browser?

(Select one)
Select an answer

Refer to exhibit.



A mechanical designer is creating a detailed drawing for the inch part shown in the exhibit.

What does the feature control frame tell about the part?

(Select one)
Select an answer

What tool can be used to combine multiple surfaces into one surface body?

(Select one)
Select an answer

Refer to exhibit.



A mechanical designer would like to move the instance 1515-3953 Box:1 out of the sub assembly - Assembly1:1.

Which command will perform this action?

(Select one)
Select an answer

What allows an assembly constraint to change the size of features in components?

(Select one)
Select an answer

Refer to exhibit.



A mechanical designer has created a shape generator study to validate load paths in a linkage design.

What is the next step once the mechanical designer is ready to proceed with the shape generator results?

(Select one)
Select an answer

Refer to exhibit:

When inserting an iPart into an assembly, a mechanical designer wants the diameter to also be available for selection.How can this be set up?

(Select one)
Select an answer

Refer to exhibit.


A mechanical designer wants the holes to be spaced evenly with any change to the parameter WIDTH.What should the current selected parameter SPACE be set to?

(Select one)
Select an answer

What type of sketch geometry is ignored during 3D feature creation tools?

(Select one)
Select an answer

Refer to exhibit.



A mechanical designer has created a pump assembly with an internal gear pair.

The assembly was set up with joints and constraints to replicate the motion of all components.

Which option used in the exhibit allows the gear on Drive_Shaft:1 to cause the gear on Drive_Shaft to move as intended?

(Select one)
Select an answer

Refer to exhibit.



A mechanical designer has combined several components of a pump into a component called "Pump Assembly" as shown in the exhibit.

Which option was used?

(Select one)
Select an answer

A mechanical designer has inserted 4 bolts into an assembly using the Bolted Connection tool.

The mechanical designer needs to change the bolts from 3/8 to 1/2 for all instances after creation.

How can the bolts and associated holes be edited?

(Select one)
Select an answer

Which sheet metal tool removes material like Extrude but doesn’t need a distance defined?

(Select one)
Select an answer

Which feature allows mechanical designers to filter a Parts List in a drawing? 

(Select one)
Select an answer

A mechanical designer has been given scan data from ReCap to use while designing around existing equipment in a large mechanical room.

Which data type is most likely used to represent the object that was scanned?

(Select one)
Select an answer

Which of the following is excluded in a DWF design file?

(Select one)
Select an answer

The color of the sheet can be changed after creation using which option?

(Select one)
Select an answer

A mechanical designer has created a complex automatic transmission assembly using beveled and straight cut gears.

The mechanical designer wants to avoid computations associated with enabling contact sets for all the gears.

Which option can be used to define how all gears move in relation to each other?

(Select one)
Select an answer

Which weldment processing tool represents features performed after welding?

(Select one)
Select an answer

Which of the following is a BOM structure?

(Select one)
Select an answer

Refer to exhibit.



A mechanical designer wants to provide an Inventor drawing in DXF file format, which option must they select?

(Select one)
Select an answer

Refer to exhibit.



A mechanical designer wants to only share the space an assembly takes up and approximate shape, while hiding any round edges and center design.

What selection in the Simplify command should be used?

(Select one)
Select an answer

Refer to exhibit.



Which surface tool was used in the exhibit to convert multiple surface faces into a single solid body?

(Select one)
Select an answer

A mechanical designer has created several view representations of an assembly to be used for documentation.

Several view representations have invisible components that are to be omitted from a Bill of Materials in the detailed drawing.

Which step is required to ensure invisible components do not participate in the Bill of Materials?

(Select one)
Select an answer

Refer to exhibit.

Where can the Styles and Standard Library be changed from Read Only to Read-Write?

(Select one)
Select an answer

Refer to exhibit.



A mechanical designer wants to show their design on a drawing fully closed and fully extended without having to create multiple assemblies or a presentation.

How can the mechanical designer accomplish this from within their assembly?

(Select one)
Select an answer

45/45 questions left unanswered