• Fusion 360

Learn to machine slopes and curves

Outline

Learn to machine slopes and curves

Module overview
Create a CAM setup
Create a 3-axis roughing toolpath
Create a 3-axis finishing toolpath based on slope angle
Create a 3-axis finishing toolpath based on a boundary
Create a 3-axis parallel finishing strategy
Create a 3-axis flat toolpath
Practice exercise
Challenge exercise
Module quiz
  • Return to module overview

Module quiz

5 questions

1. Which of the following changes would drastically reduce the machining time for a 3D Adaptive toolpath?

Error: Select 2 answers

2. In a 3D contour toolpath, which other value changes when adjusting the Cusp Height?

Error: Select 2 answers

3. Once an associated named view is created, where can it be found in Fusion 360?

Error: Select 2 answers

4. When using a containment boundary selection for a 3D Contour toolpath, which option below will ensure the center of the tool never exits the selection, but will machine inside of the boundary?

Error: Select 2 answers

5. When using a Parallel 3D strategy, without a selected reference or specified angle, which reference are toolpath passes aligned with?

Error: Select 2 answers

Error: 5/5 questions unanswered
5/5 questions unanswered
  • Return to module overview

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

No, thanks, I don't want support from ${RESELLERNAME}
${RESELLERNAME}