Professional | ~1 hr. 55 min.

Learn to machine slopes and curves

Module

In this module, you create a CAM setup for a 3-axis vertical milling center and begin to rough and finish operation 1 of the course part.  The first 3-axis geometry to tackle will be slopes and curves.  Isolate toolpaths to areas and faces to make the most efficient cuts possible.

Overview

In this module, you create a CAM setup for a 3-axis vertical milling center and begin to rough and finish operation 1 of the course part.  The first 3-axis geometry to tackle will be slopes and curves.  Isolate toolpaths to areas and faces to make the most efficient cuts possible.

After completing this module, you’ll be able to:

  • Create a CAM setup.
  • Rough a 3-axis part.
  • Create a 3-axis finishing toolpath on a specific face.
  • Create a 3-axis finishing toolpath in a specific boundary.
  • Identify critical toolpath settings for finishing.
Download resources

Related learning

  • Fusion 360
Professional | ~1 hr. 30 min.
Plan to machine a part
Module
View overview
  • Fusion 360
Professional | ~1 hr. 30 min.
Learn to machine complex 3D shapes
Module
View overview
  • Fusion 360
Professional | ~1 hr.
Learn toolpath simulation and documentation
Module
View overview

Learning pathways:

CAM for Turning Learning PathwaySimulation for Static Stress AnalysisCAM for Multi-Axis MillingCAM for 3 Axis Milling

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

${RESELLERNAME}