• Revit

Systems Analysis for Mechanical Design Using Revit

Outline
1

Getting started

Module overview
Course overview
Get the software
Course resources
2

Project goals and modeling analysis strategy

Module overview
The mechanical analysis workflow
HVAC system selection and sizing
Energy settings overview
3

Create Revit spaces

Module overview
Create and define a Revit space
Work with Revit space properties
Challenge exercise
4

Create analytical systems

Module overview
Introduction to analytical systems
Create analytical systems and zone equipment
Challenge exercise
5

Create system zones

Module overview
Create a system zone and assign equipment
6

Create energy models

Module overview
Create and review analytical spaces
Create an energy model using the system browser
Reassign analytical spaces
Practice exercise
Practice exercise
7

Review material thermal properties

Module overview
Work with material thermal properties for analysis
Practice exercise
8

Perform a systems analysis

Module overview
Run a systems analysis
Review a systems analysis
Conduct a comparative systems analysis
Practice exercise
9

Course challenge exercise

Module overview
Course challenge
10

Final test

Module overview
Start your final test
  • Up next:The mechanical analysis workflow
Professional | ~20 min.
Project goals and modeling analysis strategy
Module | Skill builder

The systems analysis workflow is a larger framework that begins with concept stage energy analysis and leads to HVAC systems sizing and selection. This end-to-end workflow is the wider context for the sections in this course. Create an energy model and analytical systems to understand mechanical system requirements at the early stages of a project.

After completing this lesson, you'll be able to:

  • Describe the mechanical analysis workflow.
  • Work with energy settings used for analysis. 
  • Recognize how different energy settings impact analysis.
Download resources
  • Up next:The mechanical analysis workflow

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

No, thanks, I don't want support from ${RESELLERNAME}
${RESELLERNAME}