• Revit

Systems Analysis for Mechanical Design Using Revit

Outline
1

Getting started

Module overview
Course overview
Get the software
Course resources
2

Project goals and modeling analysis strategy

Module overview
The mechanical analysis workflow
Energy settings overview
3

Create Revit spaces

Module overview
Create and define a Revit space
Work with Revit space properties
Challenge exercise
4

Create analytical systems

Module overview
Introduction to analytical systems
Create analytical systems and zone equipment
Challenge exercise
5

Create system zones

Module overview
Create a system zone and assign equipment
6

Create energy models

Module overview
Create an energy model and analytical spaces
Practice exercise
Reassign analytical spaces
Practice exercise
7

Review material thermal properties

Module overview
Work with material thermal properties for analysis
Practice exercise
8

Perform a systems analysis

Module overview
Run a systems analysis
Review a systems analysis
Conduct a comparative systems analysis
Practice exercise
9

Course challenge exercise

Module overview
Course challenge
10

Final test

Module overview
Start your final test
  • Up next:Introduction to analytical systems
Professional | ~45 min.
Create analytical systems
Module | Skill builder

Systems analysis gives you a fast, simple, and flexible way to consider design options without having to create a physical model or system. Use these analytical systems at an early stage in your project to get the basis for load calculations, equipment selection, sizing, and system simulation.

After completing this lesson, you'll be able to:

  • Recognize key differences between physical systems and analytical systems in Revit.
  • Create an analytical system containing analytical water loops, air systems, and zone equipment.
Download resources
  • Up next:Introduction to analytical systems

Welcome ${RESELLERNAME} Customers

Please opt-in to receive reseller support

I agree that Autodesk may share my name and email address with ${RESELLERNAME} so that ${RESELLERNAME} may provide installation support and send me marketing communications.  I understand that the Reseller will be the party responsible for how this data will be used and managed.

Email is required Entered email is invalid.

No, thanks, I don't want support from ${RESELLERNAME}
${RESELLERNAME}