Free Online Classes and Tutorials

Mapping Fiber Orientation from Simulation Moldflow to Structural Finite Element Analysis

Lecture · Las Vegas · 2014

41 p 21 p 15 p

Mapping Fiber Orientation from Simulation Moldflow to Structural Finite Element Analysis

Lecture · Las Vegas · 2014

Doug Kenik

Bridging the Gap Between Autodesk® Simulation Moldflow® and Nonlinear Structural Finite Element Analysis of Molded Composites Parts

Lecture · Las Vegas · 2012

11 p 47 p 20 p

Bridging the Gap Between Autodesk® Simulation Moldflow® and Nonlinear Structural Finite Element Analysis of Molded Composites Parts

Lecture · Las Vegas · 2012

Roger Assaker

Better Model, Better Mesh, Better Results: CAD Modeling for Analysis

Industry Talk · Las Vegas · 2017

33 p

Better Model, Better Mesh, Better Results: CAD Modeling for Analysis

Industry Talk · Las Vegas · 2017

Superior simulation results can be obtained from establishing a systematic mesh.This is the result of specific CAD modeling techniques.

Mark Huntoon

BAM—Let’s Throw a Little In-CAD into Your Simulation Soup

Hands-on Lab · Las Vegas · 2015

52 p

BAM—Let’s Throw a Little In-CAD into Your Simulation Soup

Hands-on Lab · Las Vegas · 2015

Nastran In-CAD

Andrew Sears

Let’s Get It Started! An in-depth kick-off to the FEA with Nastran Power Track

Industry Talk · Las Vegas · 2015

47 p 47 p

Let’s Get It Started! An in-depth kick-off to the FEA with Nastran Power Track

Industry Talk · Las Vegas · 2015

Introduction to Finite Element Analysis (FEA)

Sualp Ozel, Dave May, Mitch Muncy

Prep School: Prepare Those Crazy Juvenile CAD Models for the Real-World of Simulation

Instructional Demo · Las Vegas · 2015

5 p 21 p

Prep School: Prepare Those Crazy Juvenile CAD Models for the Real-World of Simulation

Instructional Demo · Las Vegas · 2015

Learn how to repair, clean-up, and simplify CAD models in SimStudio to prepare them for FEA, Mechanical, and CFD Simulation.

Tyler Henderson

Automatic Rebar Detailing of Wall-Based Buildings Using Dynamo and ETABS

Industry Talk · Las Vegas · 2017

Automatic Rebar Detailing of Wall-Based Buildings Using Dynamo and ETABS

Industry Talk · Las Vegas · 2017

See the challenges faced, workflow and solutions used to develop a Dynamo Tool that communicates with ETABS 2016 for the automated detailing of RC Buildings.

Mario Lafontaine, Jorge Villarroel

Mapping Fiber Orientation from Simulation Moldflow to Structural Finite Element Analysis

Mapping Fiber Orientation from Simulation Moldflow to Structural Finite Element Analysis

Introduction to Finite Element Analysis with Simulation Mechanical

Introduction to Finite Element Analysis with Simulation Mechanical

Finite Element Analysis for the Casual User in Inventor

Finite Element Analysis for the Casual User in Inventor

Introduction to Finite Element Analysis with Nastran In-CAD

Introduction to Finite Element Analysis with Nastran In-CAD

Bridging the Gap Between Autodesk® Simulation Moldflow® and Nonlinear Structural Finite Element Analysis of Molded Composites Parts

Bridging the Gap Between Autodesk® Simulation Moldflow® and Nonlinear Structural Finite Element Analysis of Molded Composites Parts

Better Model, Better Mesh, Better Results: CAD Modeling for Analysis

Better Model, Better Mesh, Better Results: CAD Modeling for Analysis

BAM—Let’s Throw a Little In-CAD into Your Simulation Soup

BAM—Let’s Throw a Little In-CAD into Your Simulation Soup

Let’s Get It Started! An in-depth kick-off to the FEA with Nastran Power Track

Let’s Get It Started! An in-depth kick-off to the FEA with Nastran Power Track

Prep School: Prepare Those Crazy Juvenile CAD Models for the Real-World of Simulation

Prep School: Prepare Those Crazy Juvenile CAD Models for the Real-World of Simulation

Automatic Rebar Detailing of Wall-Based Buildings Using Dynamo and ETABS

Automatic Rebar Detailing of Wall-Based Buildings Using Dynamo and ETABS