Chapter 6 -- ENTITIES Section
SOLID |
The following group codes apply to solid entities. In addition to the group codes described here, see "Common Group Codes for Entities." For information about abbreviations and formatting used in this table, see "Formatting Conventions in This Reference."
Solid group codesGroup codes | Description |
100 |
Subclass marker (AcDbTrace) |
10 |
First corner |
20, 30 |
DXF: Y and Z values of first corner |
11 |
Second corner |
21, 31 |
DXF: Y and Z values of second corner |
12 |
Third corner |
22, 32 |
DXF: Y and Z values of third corner |
13 |
Fourth corner. If only three corners are entered to define the SOLID, then the fourth corner coordinate is the same as the third. |
23, 33 |
DXF: Y and Z values of fourth corner |
39 |
Thickness (optional; default = 0) |
210 |
Extrusion direction (optional; default = 0, 0, 1) |
220, 230 |
DXF: Y and Z values of extrusion direction (optional) |