To build an N-sided surface

To create a surface with up to 8 sides

1. Double click the N-sided icon, or choose Boundary surfaces > N-sided r from the Surfaces palette menu.

   The N-sided Control window appears.

   

2. Click the first boundary curve.
   • You can use free curves, isoparametric curves, curves on surface and/or trim edges.
   • To maintain continuity with another surface, you must pick an isoparametric curve or trim edge on that surface, not a construction curve used to create that surface.

     

3. Click each remaining curve (up to a total of 8) in clockwise or counter-clockwise order.
   • If two adjacent boundary curves do not intersect, the N-sided tool averages their endpoints.
   • If a curve intersects the first curve, N-sided creates the surface. Otherwise it displays the Go button and allows you to continue selecting curves.
   • If you have selected all the boundary curves, click Go.
4. Use the options in the N-sided Control window to set the continuity you want at each edge (see below).

To edit the construction history of an N-sided surface

1. Pick the surface you want to edit.
2. Click the N-sided icon, or choose Boundary surfaces > N‑sided from the Surfaces palette menu.

   The N-sided Control window appears.

3. Use the curve modification tools (in the Transform, Curve Edit, and Object Edit palettes) to reshape the curves used to create the surface, and use the N-sided Control window to change the surface creation options.

Tips and notes

• For best results, use the snapping tools to make sure the curves intersect at their endpoints. This is not required, but it makes the resulting surface more predictable.
• If you want to see only the effects of the Center Adjust options, set all the edges to Free continuity, since free edges have the fastest interaction.
• The N-sided tool does not use labels to show whether the desired continuity was achieved. Instead you must look in the Surface Continuity Feedback section of the N-sided Control window.

  Click an edge named in the N-sided Control window to view the continuity feedback for that edge.

  Lines of text indicate whether continuity was achieved. If it was not achieved, text boxes show how far out of tolerance the current edge is for each type of continuity.

Options

Surface Name

Enter a name for the new surface. The default name is “nsided” followed by a number.

Continuity table

The Continuity Table displays one row for each boundary curve involved in the N-sided operation.

• Use the pop-up menu next to each curve to set the level of continuity across that boundary.
• Use the Continuity pop-up menu above the table to set the level of continuity across all curves at once.

If the number of sides is not four, all boundary curves are automatically rebuilt to create N-sided trimmed surfaces. In this case, the Rebuild checkboxes are disabled.

The Rebuild controls can only be used on four-sided (i.e. non-trimmed) surfaces:

• Click the checkboxes at the end of each row to rebuild the curves to reduce data and improve parameterization.
• Use the Rebuild pop-up menu to set rebuild on or off for all the curves at once.

Free

This edge is free to move if required by another edge’s continuity.

Position

Only keep positional continuity. This is the default.

Tangent

Try to keep tangency with a surface that shares this edge.

Curvature

Try to keep curvature continuity with a surface that shares this edge.

Curve on Surf. Type

This option controls the degree of the curve on surface used to trim the new surface. Note that Linear is much faster than Cubic.

Linear

The trim edges will be linear curves (degree 1).

Cubic

The trim edges will be cubic curves (degree 3).

Surface Degree

This slider controls the degree of the new surface (from 1 to 7). The default is 3.

Center Adjust Options

These options let you push or pull the surface toward or away from a center point. Center Height and Center Weight only appear when Center Adjust is on.

Center Adjust

Display the center adjustment sliders and a distance locator on the model.

Center Height

Increase or decrease the distance of the locator along the surface normal. This has the effect of pulling on or pushing in the center of the surface.

Center Weight

Increase or decrease the influence of the locator on the surface. Decreasing this value increases the distance between the center point you specify and the actual center point on the surface. The locator displays this distance.

Continuity Options/Feedback

Max. New Spans

Maximum number of spans the N-sided tool can insert in both U and V (on the initial untrimmed surface), as it tries to achieve continuity.

If the N-sided tool cannot achieve tangency without inserting more than the allowed number of spans, it displays an error in the prompt line.

Smoothing Weight

Use this slider to adjust the amount of smoothing to correct bumps and bulges. A higher weight smooths more.

Continuity Feedback Text

Click an edge name in the N-sided Control window to view the continuity feedback for that edge.

Lines of text indicate whether continuity was achieved. If continuity was not achieved, text boxes show how far out of tolerance the current edge is for each type of continuity.

For example, if an edge is 1 degree from tangency, and the tangency tolerance is 0.1 degrees, the tangent continuity feedback line shows 0.9 degrees.

Control Options

Create History

Save the history of the new surface for later editing. If you turn Create History on, you can modify the curves that were used to create the surface, and the surface will update.

Auto Recalc

Update the new surface automatically as you change the values in the N-sided Control window.

Surface Evaluation

These options are not available in SurfaceStudio.

Off

Do not perform any surface evaluation on the surface.

Curvature Highlight Quick Render

Display a curvature render, highlight render, or Quick Render of the new surface.

Cross Section

Calculate and display cross-section lines on the new surface. Choosing this option displays the Show Previous Xsect option.

NoteThis option appears when the Surface Evaluation type is Cross Section.

Show Previous Xsect

Display the previous cross-section lines along with the current cross-section lines.

This lets you make changes to the surface creation options and observe the effect on the cross-sections.

Buttons

Recalc

Recalculate the surface with the current values in the N-sided Control window.

Next

Finish the current surface and prompt for new curves.