Connect with:

Tip Tuesday: Making real threads in Fusion 360

1. Go to the thread command under the Create option in the tool bar. 

Screen Shot 2014-03-24 at 1.26.27 PM.png

2. Select a body to put the thread on.

Screen Shot 2014-03-24 at 3.30.50 PM.png

3. Check the “Modeled” option to get physical threads instead of a visual representation. 

Screen Shot 2014-03-24 at 3.49.18 PM.png

And Voila! You can also apply fillets or chamfers to your part before you apply the thread depending on your design intent. 

Screen Shot 2014-03-24 at 3.34.08 PM.png

 

Screen Shot 2014-03-24 at 3.49.38 PM.png

 

Screen Shot 2014-03-24 at 3.35.56 PM.png

 

 

Comments

« Back to Blog

POST A COMMENT

Report Inappropriate Content