Autodesk Inventor Services & Support

Autodesk® Inventor™ 2008

• WAN Acceleration 2008 Hotfix
• Hotfix - Assemblies open and prompt to resolve files Copy Design and Excel
• Hotfix: Custom Properties do not get extracted for Inventor DWG files
• Hotfix - Drawings or sketches containing OLE objects may make Inventor unstable
• R2008 Support for ADR R2009
• R2008 Support for ADR R2009 in Side-By-Side Installation
• Hotfix - DWF generation causes Inventor crash in Productstream Pro
• Autodesk Inventor 2008 Service Pack 2
• Autodesk Data Management Server 2008 Service Pack 1
• Autodesk Inventor 2008 Service Pack 1
• Hotfix - End of Evaluation Period error during DWGIN
• Updating the Parker Content Center Library
• Hotfix - R6025 Errors from Inventor Integration with Productstream Professional 2008
• Hotfix - Inventor DWG Files Opened in AutoCAD 2008 may not Display Annotations

Back to top

Autodesk Inventor® 11

• HOTFIX: DWF publishing embeds incorrect font
• Hotfix - Incorrect structure synchronization from Inventor to Compass
• Autodesk Data Management Server 2008 Service Pack 1
• Hotfix - R6025 Errors from Inventor Integration with Productstream Professional 2008
• Hotfix - R6025 Errors from Inventor Integration with Compass 5

Back to top

Autodesk® Inventor® Professional for Simulation 2009

• Hotfix - Resolving GOST Issues (Russian only)
• Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Simplified Chinese only)
• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2009 - Japanese, Traditional Chinese, Simplified Chinese and Korean

Back to top

Autodesk® Inventor® Professional for Routed Systems 2009

• Hotfix - Resolving GOST Issues (Russian only)
• Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Simplified Chinese only)
• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2009 - Japanese, Traditional Chinese, Simplified Chinese and Korean

Back to top

Autodesk® Inventor™ Professional 2009

• Hotfix-content center files cannot be opened after copy design (PLK)
• Hotfix-content center files cannot be opened after copy design (RUS)
• Hotfix-content center files cannot be opened after copy design (CSY)
• Hotfix-content center files cannot be opened after copy design (DEU)
• Hotfix - Fixes the issue where Inventor occasionally fails to exit cleanly after having used Vault
• Hotfix - Redundant License Server
• Hotfix - Autodesk Network License Manager IPv6 Support
• Hotfix - Fixes an issue where Inventor prematurely exits on close (CER)
• Hotfix-content center files cannot be opened after copy design (ESP)
• Hotfix-content center files cannot be opened after copy design (FRA)
• Hotfix - Fixes the issue where iParts driven by parameters do not place correctly
• Certified Hardware XML Database Update
• Hotfix - Fixes the issue of the lowest pitch size selected by default for metric tapped holes
• AutoCAD Mechanical 2009 Service Pack 2
• Autodesk Mechanical Desktop 2009 Service Pack 2
• Hotfix - Unit translation issue in Autodesk Inventor 2009 for Korean
• Hotfix - Fixes the issue where hole edges turn to B-splines when migrating R11 drawings to R2009.
• Hotfix: "Inventor Not Responding in Design Accelerator" in Autodesk® Inventor™ 2009 German 64 bit
• Autodesk Inventor 2009 Service Pack 1
• WAN Acceleration 2009 Hotfix
• Hotfix - Resolving GOST Issues (Russian only)
• Open Close Save Hotfix
• Hotfix-content center files cannot be opened after copy design (ITA)
• AutoCAD Mechanical 2009 Service Pack 1
• Autodesk Mechanical Desktop 2009 Service Pack 1
• Hotfix - Harness Data importing issue in Autodesk Inventor 2009 (French)
• Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Polish only)
• Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Simplified Chinese only)
• Hotfix - Resolve missing up and down arrow buttons in Content Center Editor (Korean only)
• Hotfix - Check In progress bar does not get closed when checking in a drawing with DWF Publish
• Hotfix - Content Center configuration dialog may fail to invoke after R11 migration
• Hotfix - Difficulties migrating older Presentation (.ipn) files to Inventor R2009
• Hotfix - Inventor DWG files have problems after check-in using an Inventor shared project
• German Hotfix - Inventor 2009 Hotfix for Representation Views error
• Traditional Chinese Hotfix - Content Center Library update issue in Inventor 2009 for Inventor 11 Service Pack Client Upgrade for ADMS 2009
• Render Hotfix
• Hotfix - Sheet Metal Mirror/Pattern issues in Chinese version only of Inventor 2009
• Hotfix - Object Property Settings drawing proportion issue on ACM and MDT 2009 - Japenese
• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2009 - Japanese, Traditional Chinese, Simplified Chinese and Korean
• Hotfix - Localization update for Chinese GB Families in Content
• Hotfix - Fixes the API issue of OnNewView event not being raised sporadically
• Hotfix - Unable to locate model geometry (Face) curves in cut view
• Hotfix - Autodesk Activation Update

Back to top

Autodesk® Inventor™ Professional 2008

• Certified Hardware XML Database Update
• Open Failure from Windows Explorer Hotfix
• Hotfix - Drawing dimensions and title block text are lost when publishing to DWF
• Hotfix - Part with exported parameters is prompted to Save when inserted into assembly
• Hotfix - Cannot place instanced CC part for user "B" if part is checked out of the Vault by user "A"
• Hotfix – Resolving issues with export of part list to Excel in AutoCAD Mechanical 2008 SP2 and Mechanical Desktop 2008 SP2
• Hotfix - Thread class type is not shown correctly when the thread type is changed
• Hotfix - Corrupt DXFOUT translation of hole note text and leader created in Break view
• Hotfix - Angular dimensions w/tolerances created in a model are not promoted to the drawing correctly
• Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2009
• Autodesk Inventor 2008 Service Pack 3
• Inventor 2008 Service Pack 2 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
• Autodesk Mechanical Desktop 2008 Service Pack 2
• Hotfix - Addresses two issues for Russian-only versions of Inventor R2008
• Hotfix - Vista: Inventor unstable when EDM add-in is loaded
• Raster issues after installing Service Pack 1
• Hotfix - Unable to locate model geometry (Face) curves in cut view
• Hotfix - Copy Design an assy with an Excel spreadsheet does not update the link
• Hotfix - Drawings or sketches containing OLE objects may make Inventor unstable
• Hotfix for scale correction for opened *.sat files in Inventor
• ESKD Parts List does not get generated and Crashes after unloading 'ESKD Support' from Add-In Manager dialog
• HOTFIX:Crash when updating the extents of workfeatures in an assembly document
• Datum Target leaders move away from broken view when file is opened & Legacy drawings lose tables created in a previous version
• Hotfix: Derived parts not updating
• HOTFIX: After installing SP3 some mapped drives are not available in project
• HOTFIX: Inventor crash on edit sketch/part rotate & display glitches
• HOTFIX: Multiple Issues-String Resource Error, Drawing Prompts Save & Crash Open
• HOTFIX: Renaming an iFeature corrupts table and member scope editing
• HOTFIX: Editing iPart leads to inconsistent update in the iAssembly
• HOTFIX:Refresh checks out files which will not be modified
• Hotfix:Filename and path property prompting a save & Crash using Custom View to create drawing view
• Autodesk Inventor 2008 Service Pack 2
• Hotfix - Vault Browser shows "?" on when large assemblies are opened.
• Inventor Updated Templates -sheetmetal environments (French Only)
• HOTFIX: Network license launch of Inventor Professional does not load stress analysis add-in
• Hotfix - Custom library cannot be updated - Failure in update DIN EN 10278 family table
• Hotfix - Linetype display
• Hotfix - Redundant License Server
• Hotfix – Secondary User Windows Start menu launch error
• "Object not set to an instance of an Object" error using Plot Manager with IDWs.
• Autodesk Mechanical Desktop 2008 Service Pack 1
• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2008
• HOTFIX-Editing a Derived Assembly containing iParts will cause Inventor to crash
• Autodesk Inventor 2008 Service Pack 1
• Hotfix - End of Evaluation Period error during DWGIN
• Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (French only)
• Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (Spanish only)
• Hotfix - SheetMetal localized template problem (Japanese only)
• Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2008
• Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Professional 2008)
• Hotfix - Cannot Mirror Bend Capabilities from Sheet Metal Flange (German only)
• Hotfix - DWF Package Not Viewable in Autodesk Design Review 2008
• Task Scheduler DLL Registrations for Autodesk Vault and Productstream 5
• Updating the Parker Content Center Library
• Hotfix - Hungarian Layout Switching
• Hotfix - Vista Group Policy Objects
• Hotfix - Inventor DWG Files Opened in AutoCAD 2008 may not Display Annotations
• Hotfix - Live Update
• Unable to create DWF file when checking in AutoCAD Mechanical DWG file (Polish only)
• Hotfix - Drawing Templates (Polish only)
• Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Polish only)
• Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Korean only)
• Hotfix - Part and Sheetmetal Templates (German only)
• Hotfix - Unable to Use or ADD DWG Files to ADMS 2008
• Hotfix - Autodesk Activation Update

Back to top

Autodesk Inventor® Professional 11 DWF Extension

• Hotfix - Unable to check in R11_SP4 files to ADMS 2009 server when project file is on a mapped drive
• Hotfix - Editing R4 or R6 sheet metal parts in R11 occasionally fails
• Hotfix - Failure occurs after moving a Release 11 dimension without a valid reference
• Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2008
• Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2009
• Autodesk Inventor® 11 DWF Extension Service Pack 4
• Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
• Productstream Professional 2009 Support for Inventor 11
• Hotfix - Inventor Vault Browser Refresh & LOD
• Hotfix - Create or Edit Text in IDW Files After Applying Microsoft Hotfix KB918118.
• HOTFIX: After installing SP3 some mapped drives are not available in project
• Hotfix: Opening file generates a warning "String resource could not be loaded"
• HOTFIX: DWF publishing embeds incorrect font
• Hotfix: Drawing/Assembly Updates do not trigger a save request in drawing files & Screen diagonally divides in the drawing environment
• Inventor loses the connection to the lockfile.lck
• HOTFIX-Crash upon export to JT after installing SP3 for DWF Extension
• HOTFIX-Assembly features grow IAM file size dramatically
• HOTFIX: Copy Engineering Document references not replaced in IDW's containing iPart factories
• HOTFIX: Japanese version does not translate parts list properties to Part Reference attributes in DWG
• Autodesk Inventor® 11 DWF Extension Service Pack 3
• Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2008
• Hotfix - Layout Switching (Hungarian only)
• Hotfix - Drawing and/or Partslist Substitution Does Not Update
• Hotfix - A Shared Project Allows Checked Out Files to be Modified and Saved by Another User & Drawing Crashes Involving Sick Assemblies
• Hotfix - Assembly Revolve Creates Bad Cross Database References
• Hotfix - Unable to Use the Delete Face Command for Internal Empty Lumps
• Hotfix - Cannot Change the Size of Migrated Content Parts
• Hotfix - Can't Place a Customer Library Part from Content Center
• Hotfix - Save as JT Units are Always in Centimeter
• Hotfix - Print DWG Problem: No Option to Turn Off the Parts List and Table
• Hotfix - Open Base Component Command Dirties Derived Parts
• Hotfix - File Migration Results in Crash of Inventor
• Hotfix - Drawing Does Not Update when Changes are Made to the Referenced Files
• Hotfix - Performance and Stability Problems During DWF Publishing under DWF Extension
• Hotfix - Memory Consumed Rapidly when Exiting a Populated Pipe Run
• Hotfix - Instability When Exporting IDW's to DWF
• Hotfix - Design Assistant Doesn't Identify What Files Need to be Resolved and a Database ID Error Occurs During a Rename
• Autodesk Inventor 11 DWF Extension Service Pack 2

Back to top

Inventor Professional for Simulation 11

• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2007 - Japanese, Traditional Chinese, Simplified Chinese and Korean
• Productstream Professional 2009 Support for Inventor 11

Back to top

Inventor Professional for Routed Systems 11

• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2007 - Japanese, Traditional Chinese, Simplified Chinese and Korean
• Productstream Professional 2009 Support for Inventor 11

Back to top

Autodesk Inventor® Professional 11

• Certified Hardware XML Database Update
• WAN Acceleration 2007 Hotfix
• Hotfix - Unable to check in R11_SP4 files to ADMS 2009 server when project file is on a mapped drive
• Hotfix - Editing R4 or R6 sheet metal parts in R11 occasionally fails
• Hotfix - Inventor Release 11 mass property values do not get saved into iProperties
• Hotfix - Inventor Release 11 IPN file saved as DWF results in error during DWF creation
• Hotfix - Failure occurs after moving a Release 11 dimension without a valid reference
• Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2008
• Autodesk Inventor® 11 Service Pack 4
• Fatal Error Plotting to CAL Format Hotfix
• Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2009
• Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2007 - Japanese, Traditional Chinese, Simplified Chinese and Korean
• Productstream Professional 2009 Support for Inventor 11
• Hotfix - Inventor Vault Browser Refresh & LOD
• Hotfix - Create or Edit Text in IDW Files After Applying Microsoft Hotfix KB918118.
• HOTFIX: After installing SP3 some mapped drives are not available in project
• Hotfix: Opening file generates a warning "String resource could not be loaded"
• HOTFIX: DWF publishing embeds incorrect font
• Hotfix: Drawing/Assembly Updates do not trigger a save request in drawing files & Screen diagonally divides in the drawing environment
• Inventor loses the connection to the lockfile.lck
• HOTFIX-Assembly features grow IAM file size dramatically
• HOTFIX: Copy Engineering Document references not replaced in IDW's containing iPart factories
• HOTFIX: Japanese version does not translate parts list properties to Part Reference attributes in DWG
• Hotfix - Image Manipulations Improvement
• Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2007
• Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2008
• Autodesk Inventor® 11 Service Pack 3
• Task Scheduler DLL Registrations for Autodesk Vault and Productstream 5
• Hotfix - Improve performance for Content Center Libraries in Autodesk Data Management Server 5
• Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Professional for Simulation 11)
• Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Professional for Routed Systems 11)
• Autodesk Mechanical Desktop 2007 Service Pack 2 (Autodesk Inventor Professional 11)
• Hotfix - Drawing and/or Partslist Substitution Does Not Update
• Hotfix - Inventor 10 Presentation Files do not Migrate Correctly to Inventor 11
• Hotfix - Allowing Copy Design, Rename and Edit Properties Without File Migration
• Hotfix - A Shared Project Allows Checked Out Files to be Modified and Saved by Another User & Drawing Crashes Involving Sick Assemblies
• Hotfix - Assembly Revolve Creates Bad Cross Database References
• Hotfix 2 for AutoCAD Mechanical 2007 and Mechanical Desktop 2007
• Hotfix - Unable to Use the Delete Face Command for Internal Empty Lumps
• Hotfix - Cannot Change the Size of Migrated Content Parts
• Hotfix - Can't Place a Customer Library Part from Content Center
• Hotfix - Deployment Error with Internet Explorer
• Hotfix - Open Base Component Command Dirties Derived Parts
• Hotfix - File Migration Results in Crash of Inventor
• Hotfix - OLE Error
• Hotfix - Drawing Does Not Update when Changes are Made to the Referenced Files
• Hotfix - Memory Consumed Rapidly when Exiting a Populated Pipe Run
• Hotfix - Instability when dragging components
• Hotfix - Closing Drawings
• Hotfix - Updates to Online Help (Czech Only)
• Hotfix - Crash When Using Find and Replace (Polish Only)
• Hotfix - Plotting to Raster Files Performance Improvement
• Hotfix - Regenerating Drawings Containing Text
• Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Professional 11)
• Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Professional for Simulation 11)
• Autodesk Mechanical Desktop 2007 Service Pack 1 (Autodesk Inventor Professional for Routed Systems 11)
• Autodesk Inventor 11 Service Pack 2
• Hotfix - Design Assistant Doesn't Identify What Files Need to be Resolved and a Database ID Error Occurs During a Rename
• Hotfix - DesignData (Spanish only)
• Hotfix - DWF Publish Inconsistency with Inventor and EDIT Command
• Hotfix - Content Center Filter Performance Improvement
• Hotfix - Inventor Crashes When Placing Data from Content Center Via AutoDrop or on Copy Design View to Level of Detail
• Hotfix - Rotational Tweaks Disappear on Replay in DWF Viewer
• Hotfix - Read/Write Libraries Will Not Migrate When Upgrading to ADMS 5
• Hotfix - Cut and Paste
• Hotfix - Cannot Place Origin Indicator on Virtual Sharp on Hole Table (Selection Type)
• Hotfix - Balloons Attached to Migrated Assembly Views Lose Associativity When Detached and Reattached to Another Component
• Hotfix - Unable to Sort Parts List by Part Number Column
• Hotfix - Inventor Presentation Files (IPN) Fail to Open or Migrate in Inventor 11
• Hotfix - Local Setting "comma as decimal separator" Breaks Ability to Parse Bend Table with Periods
• Hotfix - Some Content Center Components are Not Updated After Refreshing Standard Components
• Hotfix - Cannot Specify Origin Point for Ordinate Dimension Sets and Cannot Create a Bisector Centerline on Concentric Arcs
• Hotfix - Inventor Becomes Unstable when Copying Design View to Level of Detail
• Hotfix - Instability When Attempting to Place a New Subassembly into an Existing Assembly
• Autodesk Inventor 11 Service Pack 1
• Hotfix - Translation Issues in Thread.xls (Polish Only)
• Hotfix - Fatal Error During Save
• Hotfix - Inventor 11 DWF Extension Needed for Autodesk Design Review 2007 & DWF Viewer 7
• Hotfix - DIN hole naming convention (German only)
• Hotfix - Sheet metal cut pattern (Italian only)
• Hotfix - Performance problems with Autoloader and Design Assistant
• Hotfix – Cable and Harness Import (Japanese only)
• Hotfix – Cable and Harness Import
• SAMreport-Lite Update
• Hotfix - Memory leaks when using the Design Assistant
• Hotfix - Unable to Install Vault Client when Mechanical Desktop is Installed
• Hotfix - Mapped Folders for Content Center files lost after restart
• Hotfix - Inventor may stop responding while using Dynamic Simulation
• Cable and Harness Help Update
• Hotfix - Autodesk Activation Update

Back to top

Autodesk Inventor® Professional 10

• Hotfix - Create or Edit Text in IDW Files After Applying Microsoft Hotfix KB918118.
• Autodesk Autoloader Prerequisite Updates
• Hotfix - Deployment Error with Internet Explorer
• Hotfix - DWF Publish Inconsistency with Inventor and EDIT Command
• Hotfix - Poor performance creating and removing .LCK files
• Hotfix - Positional Change in Top Level Assembly May Dirty File in PLM System
• Hotfix - Seam Welds Disappear When Near Some Broken Views
• Hotfix - Hole Table Discrepancies When Holes Intersect Making Splines
• Hotfix - File Save State Not Reported Correctly Via the API
• Autodesk Mechanical Desktop 2006 Service Pack 2 (Autodesk Inventor Professional 10)
• Hotfix - Autodesk Register Today
• Hotfix - Ereg.dll
• Hotfix - Updating the Mass Properties From Pulldown Results in Dirty File
• Hotfix - Changing Top Level Constraints Forces Save of Derived Parts
• Hotfix - Autodesk Activation Update
• Hotfix - Error Getting Relative Resource Path during checkin of Inventor files
• Hotfix - Tolerances in dimension are not updated if parameters are changed
• Hotfix - Metric ISO template iProperty "Part Number" doesn`t take
• Autodesk Inventor Professional 10 Service Pack 3a
• Hotfix - Autodesk Inventor View Help (Japanese)
• Hotfix - iParts Disappearing from Presentation Views
• Hotfix - Crash Using the Rotate Function in Autodesk Inventor View
• Hotfix - Assembly Feature Failure Due to Collinear Constraint Failure After Migration
• Autodesk Security Update
• Autodesk Mechanical Desktop 2006 (Autodesk Inventor Professional 10) Service Pack 1a
• Hotfix - Autodesk Inventor 10 Content Center Library for Autodesk Productstream 4 or 4.5
• Autodesk Inventor® Professional 10 Service Pack 2
• Hotfix - Master Representation in Sub-Assembly & Other Issues (Non-English Versions Only)
• Hotfix - Multiple issues in Design Accelerator (Localized versions only)
• Hotfix to address translation issues in Inventor Professional 10
• Hotfix - Inventor constraints may be lost after replace fitting
• Hotfix - Edit Definition of Sketched Symbol Causes Autodesk Inventor to Become Unstable
• Autodesk Data Management Server 4.1 Service Pack 1
• Autodesk Data Management Server 4.0 Service Pack 1
• Customize User Interface (CUI) Update
• Hotfix - Autodesk Inventor 10 Constraints Flash Demo
• Hotfix - Instability When Previewing Graphics Using Custom Addin Yippee
• Hotfix - Missing Line Geometry When Exporting Views of iParts to DWG
• Hotfix - Automatic Merging of Rows Based on Part Number Matching
• Hotfix - Report Generator Output Missing Pin Names (French Only)
• Hotfix - Instability on Start-Up with Custom Add-Ins Loaded
• Updated Tutorial Files for Autodesk Inventor 10
• Autodesk Inventor® Professional 10 Service Pack 1
• Hotfix - Placing hole table of sheet metal parts may cause instability
• Add-ins loaded into memory may cause some menus to not function correctly
• Autodesk Vault 4 Hotfix for Autodesk Inventor Add-In
• Advanced Configuration Guide for Autodesk Data Management Server

Back to top

Autodesk Inventor® Professional 9

• Hotfix - Parts With iMates Move When Made Adaptive
• Hotfix - Updating the Mass Properties From Pulldown Results in Dirty File
• Hotfix - Changing Top Level Constraints Forces Save of Derived Parts
• Hotfix - Instability when attempting to open IDW files
• Hotfix - Stability Issue When Deleting Views Only Certain Dimension Types
• Autodesk Security Update
• Autodesk Inventor Professional 9 Service Pack 4
• Autodesk Inventor 9 Service Pack 4 Design Tracking
• Hotfix - Editing iParts and Assembly Stability
• Hotfix - Performance slows when using the project cut feature through a pattern
• Hotfix - Excel and/or Autodesk Inventor 9 May Become Unstable When Editing iParts
• Hotfix for ISOGEN output and access to correct SKEY values (French Only)
• Autodesk Inventor® Professional 9 Service Pack 3
• Mechanical Desktop 2005 (Autodesk Inventor Professional 9) Service Pack 2
• Hotfix - Some IDW Files Cannot Be Opened After Migration to Autodesk Inventor 9 Service Pack 2
• Hotfix - Errors When Exporting IDW Files to DWG
• Hotfix - Assembly Mirror Comand Will Disassemble Parts from Mirrored Sub-Assembly
• Hotfix - Inventor May Resolve to Files Located Outside of the Project File
• Hotfix - Deleting a Feature Can Cause Unrelated Workaxes to be Deleted
• Hotfix - OLE Objects not visible in Stand Alone Design Tracking
• Autodesk Inventor® Professional 9 Service
  Pack 2
• Update to Inventor Style Library Colors
• Hotfix - Heap Errors opening IDW's & prompted text values changing order
• Problems with some hose styles in AIP9 (Simplified Chinese only)
• Hotfix - Heap Errors when opening IDW files in Autodesk Inventor 9
• Hotfix - Find Files not working in Design Assistant
• Hotfix - problems with Stress Analysis Report Generator (Traditional Chinese)
• Autodesk Inventor® Professional 9 Service Pack  1
• Autodesk Mechanical Desktop 2005 (Autodesk Inventor Professional 9) Service Pack 1
• Hotfix - LiveUpdate Does Not Work on Localized Inventor 9 Products
• Hotfix - Drawing Property displayed in English (German Only)
• Hotfix - Package Files cannot be viewed in the Streamline Express Viewer 5
• Hotfix - 3D DWF publish from weldment assembly can cause instabilty
• Hotfix - Unable to save IDW files create in previous versions of Autodesk Inventor
• Hotfix - Mirror or copy a part that is constrained to another causes instability
• Configuration file parse error occurs when users attempt to import (Japanese only)
• Hotfix - Constraints not honored during drag
• Autodesk Vault 3 Configuration Guide: Working with Remote File

Back to top

Autodesk Inventor® Professional 8

• Ghost reference to a file no longer present in the assembly
• Autodesk® MechanicalDesktop® 2004 DX (Autodesk Inventor® Professional 8) Service Pack 2
• Autodesk® Vault 3 Client for Autodesk Inventor® 8
• Hotfix - Some keywords of command name do not work (Korean and Chinese only)
• Hotfix - ANSI Welding symbol line shortened
• Hotfix - Save As DXF R12 Issue
• Hotfix - updating parts list in multi-sheet IDW may produce instability
• Hotfix - Some lines in an IDW are not visible in Powered by Volo View
• Autodesk Vault 2 Hotfix - Error stating "Active project is not a Vault project"
• Autodesk Inventor 8 Professional Cable and Harness Library Update
• Hotfix - Round corner relief not displayed correctly in flat pattern
• Hotfix - Tolerance values for various fits may display incorrectly
• Corrected version of Rosca.xls (Spanish only)
• Hotfix - Inventor may become unstable after creating an in-line workpoint
• Hotfix - Harness part is not compatible between Japanese and English versions
• Autodesk Inventor 8 Service Pack 1 (For Autodesk Inventor Professional Only)
• Autodesk® Mechanical Desktop® 2004 DX (Autodesk Inventor® Professional 8) Service Pack 1
• Autodesk Inventor Professional 8 Tube and Pipe template patch (Traditional Chinese only)
• Hotfix - Save Copy As a DWF file may result in result in a quick exit
• Update for Autodesk Inventor® 8 Portable License Utility Issue
• Hotfix - DWG Import Issue
• Hotfix - Instability Resulting from UNDO Command in Autodesk Inventor® Professional 8
• Hotfix - Fatal Error: Schema Migration occurring without Schema Version Change
• Updated AutoCAD® Mechanical 2004 DX files to resolve the formatting issues (Korean)

Back to top

Autodesk Inventor® Professional 7

• Update for Error 1328 while Applying Service Pack 3 (Czech only)
• Autodesk® Mechanical Desktop® 2004 (Autodesk Inventor® Professional 7) Service Pack 3
• Acadres.dll to fix Nadpis(Customize) dialog box issue in Hungarian AutoCAD 2004 (Autodesk Inventor Professional)
• Acadres.dll to fix Vlastní (Customize) dialog box issue in Czech AutoCAD 2004 (Autodesk Inventor Professional)
• Autodesk Inventor 7 Service Pack 1 IDW Open Performance Enhancement
• Instability when opening Autodesk Inventor® 5.3 files in Volo View 3
• Autodesk Inventor® 7 Service Pack 1 (All Editions)

Back to top

Autodesk® Inventor® Series 2009

• Hotfix - Resolving GOST Issues (Russian only)
• Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Polish only)
• Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Simplified Chinese only)
• Render Hotfix
• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2009 - Japanese, Traditional Chinese, Simplified Chinese and Korean

Back to top

Autodesk® Inventor™ Routed Systems Suite 2009

• Hotfix - Fixes the issue where Inventor occasionally fails to exit cleanly after having used Vault
• Hotfix - Redundant License Server
• Hotfix - Fixes an issue where Inventor prematurely exits on close (CER)
• Hotfix-content center files cannot be opened after copy design (ESP)
• Hotfix-content center files cannot be opened after copy design (FRA)
• Hotfix - Fixes the issue where iParts driven by parameters do not place correctly
• Certified Hardware XML Database Update
• Hotfix - Fixes the issue of the lowest pitch size selected by default for metric tapped holes
• AutoCAD Mechanical 2009 Service Pack 2
• Autodesk Mechanical Desktop 2009 Service Pack 2
• Hotfix - Unit translation issue in Autodesk Inventor 2009 for Korean
• Hotfix - Fixes the issue where hole edges turn to B-splines when migrating R11 drawings to R2009.
• Hotfix: "Inventor Not Responding in Design Accelerator" in Autodesk® Inventor™ 2009 German 64 bit
• Autodesk Inventor 2009 Service Pack 1
• Hotfix-content center files cannot be opened after copy design (ITA)
• AutoCAD Mechanical 2009 Service Pack 1
• Autodesk Mechanical Desktop 2009 Service Pack 1
• Hotfix - Harness Data importing issue in Autodesk Inventor 2009 (French)
• Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Polish only)
• Hotfix - Resolve missing up and down arrow buttons in Content Center Editor (Korean only)
• Hotfix - Check In progress bar does not get closed when checking in a drawing with DWF Publish
• Hotfix - Content Center configuration dialog may fail to invoke after R11 migration
• Hotfix - Difficulties migrating older Presentation (.ipn) files to Inventor R2009
• Hotfix - Inventor DWG files have problems after check-in using an Inventor shared project
• German Hotfix - Inventor 2009 Hotfix for Representation Views error
• Traditional Chinese Hotfix - Content Center Library update issue in Inventor 2009 for Inventor 11 Service Pack Client Upgrade for ADMS 2009
• Hotfix - Object Property Settings drawing proportion issue on ACM and MDT 2009 - Japenese
• Hotfix - Localization update for Chinese GB Families in Content
• Hotfix - Fixes the API issue of OnNewView event not being raised sporadically
• Hotfix - Unable to locate model geometry (Face) curves in cut view

Back to top

Autodesk® Inventor™ Simulation Suite 2009

• Hotfix-content center files cannot be opened after copy design (PLK)
• Hotfix-content center files cannot be opened after copy design (RUS)
• Hotfix-content center files cannot be opened after copy design (CSY)
• Hotfix-content center files cannot be opened after copy design (DEU)
• Hotfix - Fixes the issue where Inventor occasionally fails to exit cleanly after having used Vault
• Hotfix - Redundant License Server
• Hotfix - Autodesk Network License Manager IPv6 Support
• Hotfix - Fixes an issue where Inventor prematurely exits on close (CER)
• Hotfix-content center files cannot be opened after copy design (ESP)
• Hotfix-content center files cannot be opened after copy design (FRA)
• Hotfix - Fixes the issue where iParts driven by parameters do not place correctly
• Certified Hardware XML Database Update
• Hotfix - Fixes the issue of the lowest pitch size selected by default for metric tapped holes
• AutoCAD Mechanical 2009 Service Pack 2
• Autodesk Mechanical Desktop 2009 Service Pack 2
• Hotfix - Unit translation issue in Autodesk Inventor 2009 for Korean
• Hotfix - Fixes the issue where hole edges turn to B-splines when migrating R11 drawings to R2009.
• Hotfix: "Inventor Not Responding in Design Accelerator" in Autodesk® Inventor™ 2009 German 64 bit
• Autodesk Inventor 2009 Service Pack 1
• Hotfix-content center files cannot be opened after copy design (ITA)
• AutoCAD Mechanical 2009 Service Pack 1
• Autodesk Mechanical Desktop 2009 Service Pack 1
• Hotfix - Resolving the "Surface Texture" under "_amsurfsym" command issue (Polish only)
• Hotfix - Resolve missing up and down arrow buttons in Content Center Editor (Korean only)
• Hotfix - Check In progress bar does not get closed when checking in a drawing with DWF Publish
• Hotfix - Content Center configuration dialog may fail to invoke after R11 migration
• Hotfix - Difficulties migrating older Presentation (.ipn) files to Inventor R2009
• Hotfix - Inventor DWG files have problems after check-in using an Inventor shared project
• German Hotfix - Inventor 2009 Hotfix for Representation Views error
• Traditional Chinese Hotfix - Content Center Library update issue in Inventor 2009 for Inventor 11 Service Pack Client Upgrade for ADMS 2009
• Hotfix - Object Property Settings drawing proportion issue on ACM and MDT 2009 - Japenese
• Hotfix - Localization update for Chinese GB Families in Content
• Hotfix - Fixes the API issue of OnNewView event not being raised sporadically
• Hotfix - Unable to locate model geometry (Face) curves in cut view

Back to top

Autodesk® Inventor™ Suite 2009

• Hotfix-content center files cannot be opened after copy design (PLK)
• Hotfix-content center files cannot be opened after copy design (RUS)
• Hotfix-content center files cannot be opened after copy design (CSY)
• Hotfix-content center files cannot be opened after copy design (DEU)
• Hotfix - Fixes the issue where Inventor occasionally fails to exit cleanly after having used Vault
• Hotfix - Redundant License Server
• Hotfix - Autodesk Network License Manager IPv6 Support
• Hotfix - Fixes an issue where Inventor prematurely exits on close (CER)
• Hotfix-content center files cannot be opened after copy design (ESP)
• Hotfix-content center files cannot be opened after copy design (FRA)
• Hotfix - Fixes the issue where iParts driven by parameters do not place correctly
• Certified Hardware XML Database Update
• Hotfix - Fixes the issue of the lowest pitch size selected by default for metric tapped holes
• AutoCAD Mechanical 2009 Service Pack 2
• Autodesk Mechanical Desktop 2009 Service Pack 2
• Hotfix - Unit translation issue in Autodesk Inventor 2009 for Korean
• Hotfix - Fixes the issue where hole edges turn to B-splines when migrating R11 drawings to R2009.
• Hotfix: "Inventor Not Responding in Design Accelerator" in Autodesk® Inventor™ 2009 German 64 bit
• Autodesk Inventor 2009 Service Pack 1
• WAN Acceleration 2009 Hotfix
• Open Close Save Hotfix
• Hotfix-content center files cannot be opened after copy design (ITA)
• AutoCAD Mechanical 2009 Service Pack 1
• Autodesk Mechanical Desktop 2009 Service Pack 1
• Hotfix - Resolve missing up and down arrow buttons in Content Center Editor (Korean only)
• Hotfix - Check In progress bar does not get closed when checking in a drawing with DWF Publish
• Hotfix - Content Center configuration dialog may fail to invoke after R11 migration
• Hotfix - Difficulties migrating older Presentation (.ipn) files to Inventor R2009
• Hotfix - Inventor DWG files have problems after check-in using an Inventor shared project
• German Hotfix - Inventor 2009 Hotfix for Representation Views error
• Traditional Chinese Hotfix - Content Center Library update issue in Inventor 2009 for Inventor 11 Service Pack Client Upgrade for ADMS 2009
• Hotfix - Sheet Metal Mirror/Pattern issues in Chinese version only of Inventor 2009
• Hotfix - Object Property Settings drawing proportion issue on ACM and MDT 2009 - Japenese
• Hotfix - Localization update for Chinese GB Families in Content
• Hotfix - Fixes the API issue of OnNewView event not being raised sporadically
• Hotfix - Unable to locate model geometry (Face) curves in cut view
• Hotfix - Autodesk Activation Update

Back to top

Autodesk® Inventor™ Simulation Suite 2008

• Certified Hardware XML Database Update
• Hotfix - Drawing dimensions and title block text are lost when publishing to DWF
• Hotfix - Part with exported parameters is prompted to Save when inserted into assembly
• Hotfix - Cannot place instanced CC part for user "B" if part is checked out of the Vault by user "A"
• Hotfix – Resolving issues with export of part list to Excel in AutoCAD Mechanical 2008 SP2 and Mechanical Desktop 2008 SP2
• Hotfix - Thread class type is not shown correctly when the thread type is changed
• Hotfix - Corrupt DXFOUT translation of hole note text and leader created in Break view
• Hotfix - Angular dimensions w/tolerances created in a model are not promoted to the drawing correctly
• Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2009
• Autodesk Inventor 2008 Service Pack 3
• Inventor 2008 Service Pack 2 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
• Autodesk Mechanical Desktop 2008 Service Pack 2
• Hotfix - Addresses two issues for Russian-only versions of Inventor R2008
• Hotfix - Vista: Inventor unstable when EDM add-in is loaded
• Hotfix - Unable to locate model geometry (Face) curves in cut view
• Hotfix - Copy Design an assy with an Excel spreadsheet does not update the link
• Hotfix - Drawings or sketches containing OLE objects may make Inventor unstable
• Hotfix for scale correction for opened *.sat files in Inventor
• ESKD Parts List does not get generated and Crashes after unloading 'ESKD Support' from Add-In Manager dialog
• HOTFIX:Crash when updating the extents of workfeatures in an assembly document
• Datum Target leaders move away from broken view when file is opened & Legacy drawings lose tables created in a previous version
• Hotfix: Derived parts not updating
• HOTFIX: After installing SP3 some mapped drives are not available in project
• HOTFIX: Inventor crash on edit sketch/part rotate & display glitches
• HOTFIX: Multiple Issues-String Resource Error, Drawing Prompts Save & Crash Open
• HOTFIX: Renaming an iFeature corrupts table and member scope editing
• HOTFIX: Editing iPart leads to inconsistent update in the iAssembly
• HOTFIX:Refresh checks out files which will not be modified
• Hotfix:Filename and path property prompting a save & Crash using Custom View to create drawing view
• Autodesk Inventor 2008 Service Pack 2
• Inventor Updated Templates -sheetmetal environments (French Only)
• Hotfix - Custom library cannot be updated - Failure in update DIN EN 10278 family table
• Hotfix - Redundant License Server
• Autodesk Mechanical Desktop 2008 Service Pack 1
• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2008
• HOTFIX-Editing a Derived Assembly containing iParts will cause Inventor to crash
• Autodesk Inventor 2008 Service Pack 1
• Hotfix - End of Evaluation Period error during DWGIN
• Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (French only)
• Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (Spanish only)
• Hotfix - SheetMetal localized template problem (Japanese only)
• Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2008
• Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Simulation Suite 2008)
• Hotfix - Cannot Mirror Bend Capabilities from Sheet Metal Flange (German only)
• Updating the Parker Content Center Library
• Unable to create DWF file when checking in AutoCAD Mechanical DWG file (Polish only)
• Hotfix - Drawing Templates (Polish only)
• Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Polish only)
• Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Korean only)
• Hotfix - Part and Sheetmetal Templates (German only)

Back to top

Autodesk® Inventor™ Routed Systems Suite 2008

• Certified Hardware XML Database Update
• Hotfix - Drawing dimensions and title block text are lost when publishing to DWF
• Hotfix - Part with exported parameters is prompted to Save when inserted into assembly
• Hotfix - Cannot place instanced CC part for user "B" if part is checked out of the Vault by user "A"
• Hotfix – Resolving issues with export of part list to Excel in AutoCAD Mechanical 2008 SP2 and Mechanical Desktop 2008 SP2
• Hotfix - Thread class type is not shown correctly when the thread type is changed
• Hotfix - Corrupt DXFOUT translation of hole note text and leader created in Break view
• Hotfix - Angular dimensions w/tolerances created in a model are not promoted to the drawing correctly
• Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2009
• Autodesk Inventor 2008 Service Pack 3
• Inventor 2008 Service Pack 2 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
• Autodesk Mechanical Desktop 2008 Service Pack 2
• Hotfix - Addresses two issues for Russian-only versions of Inventor R2008
• Hotfix - Vista: Inventor unstable when EDM add-in is loaded
• Hotfix - Unable to locate model geometry (Face) curves in cut view
• Hotfix - Copy Design an assy with an Excel spreadsheet does not update the link
• Hotfix - Drawings or sketches containing OLE objects may make Inventor unstable
• Hotfix for scale correction for opened *.sat files in Inventor
• ESKD Parts List does not get generated and Crashes after unloading 'ESKD Support' from Add-In Manager dialog
• HOTFIX:Crash when updating the extents of workfeatures in an assembly document
• Datum Target leaders move away from broken view when file is opened & Legacy drawings lose tables created in a previous version
• Hotfix: Derived parts not updating
• HOTFIX: After installing SP3 some mapped drives are not available in project
• HOTFIX: Inventor crash on edit sketch/part rotate & display glitches
• HOTFIX: Multiple Issues-String Resource Error, Drawing Prompts Save & Crash Open
• HOTFIX: Renaming an iFeature corrupts table and member scope editing
• HOTFIX: Editing iPart leads to inconsistent update in the iAssembly
• HOTFIX:Refresh checks out files which will not be modified
• Hotfix:Filename and path property prompting a save & Crash using Custom View to create drawing view
• Autodesk Inventor 2008 Service Pack 2
• Inventor Updated Templates -sheetmetal environments (French Only)
• Hotfix - Custom library cannot be updated - Failure in update DIN EN 10278 family table
• Hotfix - Redundant License Server
• Autodesk Mechanical Desktop 2008 Service Pack 1
• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2008
• HOTFIX-Editing a Derived Assembly containing iParts will cause Inventor to crash
• Autodesk Inventor 2008 Service Pack 1
• Hotfix - End of Evaluation Period error during DWGIN
• Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (French only)
• Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (Spanish only)
• Hotfix - SheetMetal localized template problem (Japanese only)
• Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2008
• Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Routed Systems Suite 2008)
• Hotfix - Cannot Mirror Bend Capabilities from Sheet Metal Flange (German only)
• Updating the Parker Content Center Library
• Unable to create DWF file when checking in AutoCAD Mechanical DWG file (Polish only)
• Hotfix - Drawing Templates (Polish only)
• Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Polish only)
• Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Korean only)
• Hotfix - Part and Sheetmetal Templates (German only)

Back to top

Autodesk® Inventor™ Suite 2008

• Certified Hardware XML Database Update
• Open Failure from Windows Explorer Hotfix
• Hotfix - Drawing dimensions and title block text are lost when publishing to DWF
• WAN Acceleration 2008 Hotfix
• Hotfix - Part with exported parameters is prompted to Save when inserted into assembly
• Hotfix - Cannot place instanced CC part for user "B" if part is checked out of the Vault by user "A"
• Hotfix – Resolving issues with export of part list to Excel in AutoCAD Mechanical 2008 SP2 and Mechanical Desktop 2008 SP2
• Hotfix - Thread class type is not shown correctly when the thread type is changed
• Hotfix - Corrupt DXFOUT translation of hole note text and leader created in Break view
• Hotfix - Angular dimensions w/tolerances created in a model are not promoted to the drawing correctly
• Inventor 2008 Service Pack 3 Client Update for Autodesk Data Management Server (ADMS) 2009
• Autodesk Inventor 2008 Service Pack 3
• Inventor 2008 Service Pack 2 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
• Autodesk Mechanical Desktop 2008 Service Pack 2
• Hotfix - Addresses two issues for Russian-only versions of Inventor R2008
• Hotfix - Vista: Inventor unstable when EDM add-in is loaded
• Raster issues after installing Service Pack 1
• Hotfix - Unable to locate model geometry (Face) curves in cut view
• Hotfix - Copy Design an assy with an Excel spreadsheet does not update the link
• Hotfix for scale correction for opened *.sat files in Inventor
• ESKD Parts List does not get generated and Crashes after unloading 'ESKD Support' from Add-In Manager dialog
• HOTFIX:Crash when updating the extents of workfeatures in an assembly document
• Datum Target leaders move away from broken view when file is opened & Legacy drawings lose tables created in a previous version
• Hotfix: Derived parts not updating
• HOTFIX: After installing SP3 some mapped drives are not available in project
• HOTFIX: Inventor crash on edit sketch/part rotate & display glitches
• HOTFIX: Multiple Issues-String Resource Error, Drawing Prompts Save & Crash Open
• HOTFIX: Renaming an iFeature corrupts table and member scope editing
• HOTFIX: Editing iPart leads to inconsistent update in the iAssembly
• HOTFIX:Refresh checks out files which will not be modified
• Hotfix:Filename and path property prompting a save & Crash using Custom View to create drawing view
• Hotfix - Vault Browser shows "?" on when large assemblies are opened.
• Inventor Updated Templates -sheetmetal environments (French Only)
• Hotfix - Custom library cannot be updated - Failure in update DIN EN 10278 family table
• Hotfix - Linetype display
• Hotfix - Redundant License Server
• Hotfix – Secondary User Windows Start menu launch error
• "Object not set to an instance of an Object" error using Plot Manager with IDWs.
• Autodesk Mechanical Desktop 2008 Service Pack 1
• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2008
• HOTFIX-Editing a Derived Assembly containing iParts will cause Inventor to crash
• Hotfix - End of Evaluation Period error during DWGIN
• Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (French only)
• Hotfix - Styles Conflict Error after application of Autodesk® InventorT 2008 Service Pack (Spanish only)
• Hotfix - SheetMetal localized template problem (Japanese only)
• Hotfix - Mass Properties calculation issue on Autodesk Mechanical Desktop 2008
• Hotfix - Resolving Fatal Errors with AcadmEx.arx Failing to Load and Other Issues (Autodesk Inventor Suite 2008)
• Hotfix - DWF Package Not Viewable in Autodesk Design Review 2008
• Task Scheduler DLL Registrations for Autodesk Vault and Productstream 5
• Hotfix - Hungarian Layout Switching
• Hotfix - Vista Group Policy Objects
• Hotfix - Live Update
• Unable to create DWF file when checking in AutoCAD Mechanical DWG file (Polish only)
• Hotfix - Drawing Templates (Polish only)
• Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Polish only)
• Hotfix - Autodesk Vault/Autodesk Productstream Online PDF (Korean only)
• Hotfix - Part and Sheetmetal Templates (German only)
• Hotfix - Unable to Use or ADD DWG Files to ADMS 2008
• Hotfix - Autodesk Activation Update

Back to top

Autodesk Inventor® Series 11 DWF Extension

• Hotfix - Unable to check in R11_SP4 files to ADMS 2009 server when project file is on a mapped drive
• Hotfix - Editing R4 or R6 sheet metal parts in R11 occasionally fails
• Hotfix - Failure occurs after moving a Release 11 dimension without a valid reference
• Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2008
• Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2009
• Autodesk Inventor® 11 DWF Extension Service Pack 4
• Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
• Productstream Professional 2009 Support for Inventor 11
• Hotfix - Create or Edit Text in IDW Files After Applying Microsoft Hotfix KB918118.
• HOTFIX: Copy Engineering Document references not replaced in IDW's containing iPart factories
• HOTFIX: Japanese version does not translate parts list properties to Part Reference attributes in DWG
• Autodesk Inventor® 11 DWF Extension Service Pack 3
• Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2008
• Hotfix - Drawing and/or Partslist Substitution Does Not Update
• Hotfix - Inventor 10 Presentation Files do not Migrate Correctly to Inventor 11
• Hotfix - A Shared Project Allows Checked Out Files to be Modified and Saved by Another User & Drawing Crashes Involving Sick Assemblies
• Hotfix - Assembly Revolve Creates Bad Cross Database References
• Hotfix - Unable to Use the Delete Face Command for Internal Empty Lumps
• Hotfix - Cannot Change the Size of Migrated Content Parts
• Hotfix - Can't Place a Customer Library Part from Content Center
• Hotfix - Save as JT Units are Always in Centimeter
• Hotfix - Print DWG Problem: No Option to Turn Off the Parts List and Table
• Hotfix - Open Base Component Command Dirties Derived Parts
• Hotfix - File Migration Results in Crash of Inventor
• Hotfix - Drawing Does Not Update when Changes are Made to the Referenced Files
• Hotfix - Performance and Stability Problems During DWF Publishing under DWF Extension
• Hotfix - Memory Consumed Rapidly when Exiting a Populated Pipe Run
• Hotfix - Instability When Exporting IDW's to DWF
• Hotfix - Design Assistant Doesn't Identify What Files Need to be Resolved and a Database ID Error Occurs During a Rename
• Autodesk Inventor 11 DWF Extension Service Pack 2

Back to top

Autodesk Inventor® Series 11

• Certified Hardware XML Database Update
• WAN Acceleration 2007 Hotfix
• Hotfix - Unable to check in R11_SP4 files to ADMS 2009 server when project file is on a mapped drive
• Hotfix - Editing R4 or R6 sheet metal parts in R11 occasionally fails
• Hotfix - Inventor Release 11 mass property values do not get saved into iProperties
• Hotfix - Inventor Release 11 IPN file saved as DWF results in error during DWF creation
• Hotfix - Failure occurs after moving a Release 11 dimension without a valid reference
• Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2008
• Autodesk Inventor® 11 Service Pack 4
• Fatal Error Plotting to CAL Format Hotfix
• Autodesk Inventor 11 Service Pack 4 Client Update for ADMS 2009
• Inventor 11 Service Pack 3 Client Upgrade for Autodesk Data Management Server (ADMS) 2009
• Hotfix - OptionKey issues on Autodesk Mechanical Desktop 2007 - Japanese, Traditional Chinese, Simplified Chinese and Korean
• Productstream Professional 2009 Support for Inventor 11
• Hotfix - Inventor Vault Browser Refresh & LOD
• Hotfix - Create or Edit Text in IDW Files After Applying Microsoft Hotfix KB918118.