Where applicable, you can see country-specific product information, offers, and pricing.

Change country/language X

Education

North America

South America

Close

FIRST Robotics webinar series

The FIRST (For Inspiration and Recognition of Science and Technology) Robotics webinar series offers student resources and design education. Both mentors and students can benefit from the series.

Upcoming webinars

Check back here for upcoming webinars.

Previously recorded webinars

Introduction to Inventor: Setting Up a Project, Navigating the User Interface, and Sketching
In this webinar you will learn how to control your data by creating projects and creating new files. You will then learn how to navigate Autodesk Inventor’s user interface, create 2D sketches using a variety of commands, and constrain the sketches by applying sketch constraints and parametric dimensions.
Watch the webinar recording
Download the webinar presentation

Autodesk Inventor: Creating Parts
This webinar covers how to create 3D parametric parts by extruding, revolving, and sweeping sketches and using primitive shapes. You will also learn how to create secondary features by adding and removing material from the part which includes extruding, revolving and placing holes.
Watch the webinar recording
Download the webinar presentation

Autodesk Inventor: Creating Assemblies
In this webinar you will learn how to place parts into an assembly file, create parts in the context of the assembly file. After parts are located in the assembly, you will learn how to constrain the components together using assembly constraints, how to edit assembly constraints, and assembly best practices.
Watch the webinar recording
Download the webinar presentation

Autodesk Inventor: Creating Drawings
In this webinar you will learn how to create 2D drawing views from a part or assembly file which is used to document the design. You will learn how to create a new drawing file, create; base, orthographic, isometric and section drawing views. Then you will create views from the part or assembly, and then add annotations such as dimensions and hole notes to the views.
Watch the webinar recording
Download the webinar presentation

Autodesk Inventor: Dynamic Simulation
In this webinar you will learn how to use the Dynamic Simulation functionality within Inventor Professional to evaluate a robot's kinetics. You will also learn how to apply real world forces, run a simulation, and review the results which include positions, velocities, acceleration, reaction forces and torques, and driving forces.
Watch the webinar recording
Download the webinar presentation

Autodesk Inventor: Finite Element Analysis
In this webinar you will learn how to use the stress analysis environment within Inventor Professional to run various simulations on a robot to determine critical stress and failure points before building a single component. You will discover how to define the material, the boundary conditions (consisting of loads and constraints), and specify contact conditions. Once these criteria are entered, you will learn how to run the simulation and analyze the results.
Watch the webinar recording
Download the webinar presentation


Follow us